[PATCH V14 05/12] arm: dts: imx6qdl: Add Root Port node and PERST property

Sherry Sun
2026-04-22T09:34:44Z

arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts | 17 ++++-------------
arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 5 +++++
arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi | 11 +++++++++++
arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts | 5 +++++
4 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
index c78f101c3cc1..2ddd71f09da3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
@@ -323,19 +323,10 @@ &ipu1_di0_disp0 {
remote-endpoint = <&parallel_display_in>;
};

-&pcie {
- pcie@0,0 {
- reg = <0x000000 0 0 0 0>;
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x00 0xff>;
- ranges;
-
- /* non-removable i211 ethernet card */
- eth1: ethernet@0,0 {
- reg = <0x010000 0 0 0 0>;
- };
+&pcie_port0 {
+ /* non-removable i211 ethernet card */
+ eth1: ethernet@0,0 {
+ reg = <0x010000 0 0 0 0>;
};
};

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index ba29720e3f72..fe9046c03ddd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -754,11 +754,16 @@ lvds0_out: endpoint {
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
+ /* This property is deprecated, use reset-gpios from the Root Port node. */
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
vpcie-supply = <&reg_pcie>;
status = "okay";
};

+&pcie_port0 {
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+};
+
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index 4dc2c410cf61..9438862b9927 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -302,6 +302,17 @@ pcie: pcie@1ffc000 {
<&clks IMX6QDL_CLK_PCIE_REF_125M>;
clock-names = "pcie", "pcie_bus", "pcie_phy";
status = "disabled";
+
+ pcie_port0: pcie@0 {
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};

aips1: bus@2000000 { /* AIPS1 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
index c5b220aeaefd..6b12cab7175f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
@@ -45,10 +45,15 @@ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
};

&pcie {
+ /* This property is deprecated, use reset-gpios from the Root Port node. */
reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
status = "okay";
};

+&pcie_port0 {
+ reset-gpios = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+};
+
&sata {
status = "okay";
};
--
2.37.1