From: Devin Li <Devin.Li@cixtech.com>
To: peter.chen@cixtech.com, fugang.duan@cixtech.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
cix-kernel-upstream@cixtech.com
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, guoyin.chen@cixtech.com,
robin.wang@cixtech.com, hong.guo@cixtech.com,
Devin.Li@cixtech.com
Subject: [PATCH v1] arm64: dts: cix: Add CPU idle states for Sky1
Date: Fri, 24 Apr 2026 12:34:36 +0800 [thread overview]
Message-ID: <20260424043436.162009-1-Devin.Li@cixtech.com> (raw)
From: "devin.li" <Devin.Li@cixtech.com>
Add PSCI-based CPU idle state definitions for the Sky1 SoC,
enabling core and cluster level power management through
ARM PSCI firmware.
Three idle states are defined:
- CPU_SLEEP_0: Core idle state for A520 cores
(psci-suspend-param 0x0010000), entry-latency 34us,
exit-latency 100us
- CPU_SLEEP_1: Core idle state for A720 cores
(psci-suspend-param 0x10000), entry-latency 31us,
exit-latency 79us
- CLUSTER_SLEEP_0: Cluster idle state shared by all cores
(psci-suspend-param 0x1010000), entry-latency 41us,
exit-latency 104us
A520 cores (cpu0-3) reference CPU_SLEEP_0 and CLUSTER_SLEEP_0,
while A720 cores (cpu4-11) reference CPU_SLEEP_1 and
CLUSTER_SLEEP_0.
Signed-off-by: devin.li <Devin.Li@cixtech.com>
---
arch/arm64/boot/dts/cix/sky1.dtsi | 41 +++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index bb5cfb1f2113..0611098b5f05 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -23,6 +23,7 @@ cpu0: cpu@0 {
reg = <0x0 0x0>;
device_type = "cpu";
capacity-dmips-mhz = <403>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
cpu1: cpu@100 {
@@ -31,6 +32,7 @@ cpu1: cpu@100 {
reg = <0x0 0x100>;
device_type = "cpu";
capacity-dmips-mhz = <403>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
cpu2: cpu@200 {
@@ -39,6 +41,7 @@ cpu2: cpu@200 {
reg = <0x0 0x200>;
device_type = "cpu";
capacity-dmips-mhz = <403>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
cpu3: cpu@300 {
@@ -47,6 +50,7 @@ cpu3: cpu@300 {
reg = <0x0 0x300>;
device_type = "cpu";
capacity-dmips-mhz = <403>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
cpu4: cpu@400 {
@@ -55,6 +59,7 @@ cpu4: cpu@400 {
reg = <0x0 0x400>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu5: cpu@500 {
@@ -63,6 +68,7 @@ cpu5: cpu@500 {
reg = <0x0 0x500>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu6: cpu@600 {
@@ -71,6 +77,7 @@ cpu6: cpu@600 {
reg = <0x0 0x600>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu7: cpu@700 {
@@ -79,6 +86,7 @@ cpu7: cpu@700 {
reg = <0x0 0x700>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu8: cpu@800 {
@@ -87,6 +95,7 @@ cpu8: cpu@800 {
reg = <0x0 0x800>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu9: cpu@900 {
@@ -95,6 +104,7 @@ cpu9: cpu@900 {
reg = <0x0 0x900>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu10: cpu@a00 {
@@ -103,6 +113,7 @@ cpu10: cpu@a00 {
reg = <0x0 0xa00>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu11: cpu@b00 {
@@ -111,6 +122,7 @@ cpu11: cpu@b00 {
reg = <0x0 0xb00>;
device_type = "cpu";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>;
};
cpu-map {
@@ -153,6 +165,35 @@ core11 {
};
};
};
+
+ idle-states {
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <34>;
+ exit-latency-us = <100>;
+ min-residency-us = <3000>;
+ };
+
+ CPU_SLEEP_1: cpu-sleep-1 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <31>;
+ exit-latency-us = <79>;
+ min-residency-us = <3000>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ local-timer-stop;
+ entry-latency-us = <41>;
+ exit-latency-us = <104>;
+ min-residency-us = <4000>;
+ };
+ };
};
firmware {
--
2.49.0
reply other threads:[~2026-04-24 4:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260424043436.162009-1-Devin.Li@cixtech.com \
--to=devin.li@cixtech.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fugang.duan@cixtech.com \
--cc=guoyin.chen@cixtech.com \
--cc=hong.guo@cixtech.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.chen@cixtech.com \
--cc=robh@kernel.org \
--cc=robin.wang@cixtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox