From: Wangao Wang <wangao.wang@oss.qualcomm.com>
To: Bryan O'Donoghue <bod@kernel.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Wangao Wang <wangao.wang@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Subject: [PATCH v5 4/5] arm64: dts: qcom: purwa: Override Iris clocks and operating points
Date: Wed, 29 Apr 2026 15:43:55 +0800 [thread overview]
Message-ID: <20260429-enable_iris_on_purwa-v5-4-438fa96da248@oss.qualcomm.com> (raw)
In-Reply-To: <20260429-enable_iris_on_purwa-v5-0-438fa96da248@oss.qualcomm.com>
The Iris block on X1P differs from SM8550/X1E in its clock configuration
and requires a dedicated OPP table. The node inherited from the X1E cannot
be reused directly, and the fallback compatible "qcom,sm8550-iris" cannot
be applied.
Override the inherited clocks, clock-names, and operating points, and
replaces them with the X1P42100-specific definitions. A new OPP table
is provided to support the correct performance levels on this platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/purwa.dtsi | 50 +++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/purwa.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi
index ea65b8448836ead83f837e973ed536e8ea0ed8ef..a503deec97d75dcfb6792b007e0b74e517404cfc 100644
--- a/arch/arm64/boot/dts/qcom/purwa.dtsi
+++ b/arch/arm64/boot/dts/qcom/purwa.dtsi
@@ -21,6 +21,7 @@
/delete-node/ &cpu_pd11;
/delete-node/ &gpu_opp_table;
/delete-node/ &gpu_speed_bin;
+/delete-node/ &iris_opp_table;
/delete-node/ &pcie3_phy;
/delete-node/ &thermal_aoss3;
/delete-node/ &thermal_cpu2_0_btm;
@@ -167,6 +168,55 @@ &gpucc {
compatible = "qcom,x1p42100-gpucc";
};
+&iris {
+ compatible = "qcom,x1p42100-iris";
+
+ clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>,
+ <&videocc VIDEO_CC_MVS0_BSE_CLK>;
+ clock-names = "iface",
+ "core",
+ "vcodec0_core",
+ "vcodec0_bse";
+
+ operating-points-v2 = <&iris_opp_table_x1p42100>;
+
+ iris_opp_table_x1p42100: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-210000000 {
+ opp-hz = /bits/ 64 <210000000 105000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>,
+ <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000 150000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>,
+ <&rpmhpd_opp_svs>;
+ };
+
+ opp-335000000 {
+ opp-hz = /bits/ 64 <335000000 167500000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-424000000 {
+ opp-hz = /bits/ 64 <424000000 212000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000 250000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_turbo>;
+ };
+ };
+};
+
/* PCIe3 has half the lanes compared to X1E80100 */
&pcie3 {
num-lanes = <4>;
--
2.43.0
next prev parent reply other threads:[~2026-04-29 7:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-29 7:43 [PATCH v5 0/5] media: iris: add support for purwa platform Wangao Wang
2026-04-29 7:43 ` [PATCH v5 1/5] dt-bindings: media: qcom,sm8550-iris: Add X1P42100 compatible Wangao Wang
2026-04-30 7:38 ` Krzysztof Kozlowski
2026-04-29 7:43 ` [PATCH v5 2/5] media: iris: Add hardware power on/off ops for X1P42100 Wangao Wang
2026-04-30 8:09 ` Dikshita Agarwal
2026-04-29 7:43 ` [PATCH v5 3/5] media: iris: Add platform data " Wangao Wang
2026-04-30 10:53 ` Dikshita Agarwal
2026-04-29 7:43 ` Wangao Wang [this message]
2026-04-29 7:43 ` [PATCH v5 5/5] arm64: dts: qcom: purwa-iot-som: enable video Wangao Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260429-enable_iris_on_purwa-v5-4-438fa96da248@oss.qualcomm.com \
--to=wangao.wang@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox