From: Mahadevan P <mahadevan.p@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
cros-qcom-dts-watchers@chromium.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Mahadevan P <mahadevan.p@oss.qualcomm.com>,
Mahadevan P <mahap@qti.qualcomm.com>
Subject: [PATCH v2 0/3] arm64: dts: qcom: kodiak: Enable 4-lane DP via QMP Combo PHY
Date: Wed, 29 Apr 2026 12:10:39 +0530 [thread overview]
Message-ID: <20260429-kodiak_v2-v2-0-c3a703cc30eb@oss.qualcomm.com> (raw)
This series enables full 4-lane DisplayPort operation on SC7280/kodiak
platforms by wiring up the QMP Combo PHY correctly and consolidating
the DP endpoint configuration in the SoC dtsi.
Patch 1 adds mode-switch to the QMP Combo PHY node in kodiak.dtsi,
which is required for the PHY to respond to USB-C Alternate Mode
negotiation and switch into 4-lane DP configuration.
Patch 2 moves the data-lanes property from individual board files into
kodiak.dtsi since the PHY-to-controller wiring is fixed in silicon.
It also removes redundant remote-endpoint and orientation-switch
overrides from qcs6490-rb3gen2 and qcs6490-thundercomm-rubikpi3 that
are already covered by the SoC dtsi.
Patch 3 updates data-lanes from <0 1> to <0 1 2 3> in kodiak.dtsi now
that mode-switch is in place, enabling the full 4-lane DP link.
Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
---
Changes in v2:
- Split single patch into 3 patches.
- Move mode-switch and data-lanes to kodiak.dtsi instead of board
file (Neil Armstrong, Konrad Dybcio)
- Remove redundant board-level endpoint and orientation-switch
overrides now covered by kodiak.dtsi
- v1 received a Reviewed-by from Dmitry on the combined change;
that tag has been dropped pending re-review of the split.
---
Mahadevan P (3):
arm64: dts: qcom: kodiak: allow mode-switch events to reach the QMP Combo PHY
arm64: dts: qcom: kodiak: move dp data-lanes to SoC dtsi
arm64: dts: qcom: kodiak: Set up 4-lane DP
arch/arm64/boot/dts/qcom/kodiak.dtsi | 2 ++
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 4 ----
arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts | 4 ----
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 11 -----------
arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts | 1 -
arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 3 ---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 1 -
7 files changed, 2 insertions(+), 24 deletions(-)
---
base-commit: 452c3b1ea875276105ac90ba474f72b4cd9b77a2
change-id: 20260420-kodiak_v2-d7a06d50db5e
Best regards,
--
Mahadevan P <mahadevan.p@oss.qualcomm.com>
next reply other threads:[~2026-04-29 6:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-29 6:40 Mahadevan P [this message]
2026-04-29 6:40 ` [PATCH v2 1/3] arm64: dts: qcom: kodiak: allow mode-switch events to reach the QMP Combo PHY Mahadevan P
2026-04-29 6:40 ` [PATCH v2 2/3] arm64: dts: qcom: kodiak: move dp data-lanes to SoC dtsi Mahadevan P
2026-04-29 6:40 ` [PATCH v2 3/3] arm64: dts: qcom: kodiak: Set up 4-lane DP Mahadevan P
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260429-kodiak_v2-v2-0-c3a703cc30eb@oss.qualcomm.com \
--to=mahadevan.p@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mahap@qti.qualcomm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox