[PATCH v2 2/7] arm64: dts: rockchip: Add HYM8563 RTC for Khadas Edge 2L

[Gray Huang <gray.huang@wesion.com>]

The Khadas Edge 2L uses an on-board HYM8563 RTC connected to
I2C2. Enable it and expose its 32.768kHz clock output so later
board-level patches can reference it as the LPO clock source for
the AP6275P wireless module.

Mark the RTC as a wakeup source as well.

Signed-off-by: Gray Huang <gray.huang@wesion.com>
---
 .../boot/dts/rockchip/rk3576-khadas-edge-2l.dts     | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
index 5781deae00d9..c85b219fe409 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
@@ -46,8 +46,6 @@ vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
 		regulator-max-microvolt = <2000000>;
 		vin-supply = <&vcc_sys>;
 	};
-
-
 };
 
 &cpu_l0 {
@@ -431,6 +429,17 @@ regulator-state-mem {
 	};
 };
 
+&i2c2 {
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		wakeup-source;
+	};
+};
 
 &sdhci {
 	bus-width = <8>;
-- 
2.34.1