[PATCH v4 0/2] Add Lontium LT7911EXC eDP to MIPI DSI bridge

[syyang@lontium.com]

From: Sunyun Yang <syyang@lontium.com>

The LT7911EXC is an I2C-controlled bridge that Receiver eDP1.4
and output signal/dual port mipi. This series introduces:

- A device tree binding YAML file describing the hardware
- A new DRM bridge driver implementing the basic functionality

Signed-off-by: Sunyun Yang<syyang@lontium.com>
---
Change in v4:
- dt-binding:
 1. Fix the missing spaces on the "subject".             [Krzysztof]
 2. Fix the error descriptions for port@0 and port@1.
- drm/bridge:
- Link to v3: https://lore.kernel.org/lkml/20260429040541.3404116-1-syyang@lontium.com/

Change in v3:
- dt-binding:
- drm/bridge:
 1. already submit lt7911exc_fw.bin to linux-firmware.  [Dmitry]
 2. remove lt7911exc_remove function.
 3. drop  the "lontium, "  in lt7911exc_i2c_table.
- Link to v2: https://lore.kernel.org/lkml/20260428063224.3316655-1-syyang@lontium.com/

Change in v2:
- dt-binding:
 1. reset pins use active low.                        [Dmitry]
- drm/bridge:
 1. use atomic_* callbacks.                           [Quentin]
 2. fix the incorrect formatting and spaces.
 3. add the required header files.                    [Dmitry]
 4. remove "enabled" flag.
 5. remove *fw from the lt7911exc struct.
 6. .max_register and .range_max use actual range.
 7. regulator use bulk interface.
 8. use dev_err_probe, devm_mutex_init and devm_drm_bridge_add.
 9. Replace GPL v2 with GPL.
- Link to v1: https://lore.kernel.org/lkml/20260420023354.1192642-1-syyang@lontium.com/
---
Sunyun Yang (2):
  dt-bindings: bridge: Add Lontium LT7911EXC eDP to MIPI DSI bridge
  drm/bridge: Add Lontium LT7911EXC eDP to MIPI DSI bridge

 .../display/bridge/lontium,lt7911exc.yaml     |  89 ++++
 drivers/gpu/drm/bridge/Kconfig                |  13 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/lontium-lt7911exc.c    | 493 ++++++++++++++++++
 4 files changed, 596 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt7911exc.yaml
 create mode 100644 drivers/gpu/drm/bridge/lontium-lt7911exc.c

-- 
2.34.1