public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Tanmay Shah <tanmay.shah@amd.com>
To: <andersson@kernel.org>, <mathieu.poirier@linaro.org>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<michal.simek@amd.com>, <ben.levinsky@amd.com>,
	<tanmay.shah@amd.com>
Cc: <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 2/2] remoteproc: xlnx: enable auto boot feature
Date: Fri, 1 May 2026 07:37:07 -0700	[thread overview]
Message-ID: <20260501143707.1591110-3-tanmay.shah@amd.com> (raw)
In-Reply-To: <20260501143707.1591110-1-tanmay.shah@amd.com>

remoteproc framework has capability to start (or attach to) the remote
processor automatically if auto boot flag is set by the driver during
probe. If remote core is not started before the Linux boot, and linux is
expected to start the remote core then it uses "firmware-name" property
to load default firmware during auto boot.

Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
---
 drivers/remoteproc/xlnx_r5_remoteproc.c | 48 +++++++++++++++++--------
 1 file changed, 34 insertions(+), 14 deletions(-)

diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index 45a62cb98072..652030f9cea2 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -899,17 +899,18 @@ static const struct rproc_ops zynqmp_r5_rproc_ops = {
 };
 
 /**
- * zynqmp_r5_add_rproc_core() - Add core data to framework.
- * Allocate and add struct rproc object for each r5f core
+ * zynqmp_r5_alloc_rproc_core() - alloc rproc core data structure
+ * Allocate struct rproc object for each r5f core
  * This is called for each individual r5f core
  *
  * @cdev: Device node of each r5 core
  *
  * Return: zynqmp_r5_core object for success else error code pointer
  */
-static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
+static struct zynqmp_r5_core *zynqmp_r5_alloc_rproc_core(struct device *cdev)
 {
 	struct zynqmp_r5_core *r5_core;
+	const char *fw_name = NULL;
 	struct rproc *r5_rproc;
 	int ret;
 
@@ -918,10 +919,15 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
 	if (ret)
 		return ERR_PTR(ret);
 
+	ret = rproc_of_parse_firmware(cdev, 0, &fw_name);
+	if (ret < 0 && ret != -EINVAL)
+		return ERR_PTR(dev_err_probe(cdev, ret,
+					     "failed to parse firmware-name\n"));
+
 	/* Allocate remoteproc instance */
 	r5_rproc = rproc_alloc(cdev, dev_name(cdev),
 			       &zynqmp_r5_rproc_ops,
-			       NULL, sizeof(struct zynqmp_r5_core));
+			       fw_name, sizeof(struct zynqmp_r5_core));
 	if (!r5_rproc) {
 		dev_err(cdev, "failed to allocate memory for rproc instance\n");
 		return ERR_PTR(-ENOMEM);
@@ -932,6 +938,11 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
 	r5_rproc->recovery_disabled = true;
 	r5_rproc->has_iommu = false;
 	r5_rproc->auto_boot = false;
+
+	/* attempt to boot automatically if the firmware-name is provided */
+	if (fw_name)
+		r5_rproc->auto_boot = true;
+
 	r5_core = r5_rproc->priv;
 	r5_core->dev = cdev;
 	r5_core->np = dev_of_node(cdev);
@@ -941,13 +952,6 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
 		goto free_rproc;
 	}
 
-	/* Add R5 remoteproc core */
-	ret = rproc_add(r5_rproc);
-	if (ret) {
-		dev_err(cdev, "failed to add r5 remoteproc\n");
-		goto free_rproc;
-	}
-
 	r5_core->rproc = r5_rproc;
 	return r5_core;
 
@@ -1280,6 +1284,7 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
 			if (zynqmp_r5_get_rsc_table_va(r5_core))
 				dev_dbg(r5_core->dev, "rsc tbl not found\n");
 			r5_core->rproc->state = RPROC_DETACHED;
+			r5_core->rproc->auto_boot = true;
 		}
 	}
 
@@ -1304,7 +1309,7 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
 	enum rpu_oper_mode fw_reg_val;
 	struct device **child_devs;
 	enum rpu_tcm_comb tcm_mode;
-	int core_count, ret, i;
+	int core_count, ret, i, j;
 	struct mbox_info *ipi;
 
 	ret = of_property_read_u32(dev_node, "xlnx,cluster-mode", &cluster_mode);
@@ -1390,7 +1395,7 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
 		child_devs[i] = &child_pdev->dev;
 
 		/* create and add remoteproc instance of type struct rproc */
-		r5_cores[i] = zynqmp_r5_add_rproc_core(&child_pdev->dev);
+		r5_cores[i] = zynqmp_r5_alloc_rproc_core(&child_pdev->dev);
 		if (IS_ERR(r5_cores[i])) {
 			ret = PTR_ERR(r5_cores[i]);
 			r5_cores[i] = NULL;
@@ -1435,16 +1440,31 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
 		goto release_r5_cores;
 	}
 
+	for (j = 0; j < cluster->core_count; j++) {
+		/* Add R5 remoteproc core */
+		ret = rproc_add(r5_cores[j]->rproc);
+		if (ret) {
+			dev_err_probe(r5_cores[j]->dev, ret,
+				      "failed to add remoteproc\n");
+			goto delete_r5_cores;
+		}
+	}
+
 	kfree(child_devs);
 	return 0;
 
+delete_r5_cores:
+	i = core_count - 1;
+	/* delete previous added rproc */
+	while (--j >= 0)
+		rproc_del(r5_cores[j]->rproc);
+
 release_r5_cores:
 	while (i >= 0) {
 		put_device(child_devs[i]);
 		if (r5_cores[i]) {
 			zynqmp_r5_free_mbox(r5_cores[i]->ipi);
 			of_reserved_mem_device_release(r5_cores[i]->dev);
-			rproc_del(r5_cores[i]->rproc);
 			rproc_free(r5_cores[i]->rproc);
 		}
 		i--;
-- 
2.34.1


  parent reply	other threads:[~2026-05-01 14:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-01 14:37 [PATCH v2 0/2] remoteproc: xlnx: add auto-boot support Tanmay Shah
2026-05-01 14:37 ` [PATCH v2 1/2] dt-bindings: remoteproc: xlnx: add firmware-name property Tanmay Shah
2026-05-01 15:49   ` Conor Dooley
2026-05-01 16:15     ` Shah, Tanmay
2026-05-01 16:43   ` Conor Dooley
2026-05-01 14:37 ` Tanmay Shah [this message]
2026-05-01 14:46 ` [PATCH v2 0/2] remoteproc: xlnx: add auto-boot support Shah, Tanmay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260501143707.1591110-3-tanmay.shah@amd.com \
    --to=tanmay.shah@amd.com \
    --cc=andersson@kernel.org \
    --cc=ben.levinsky@amd.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=michal.simek@amd.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox