[PATCH v4 11/15] ASoC: qcom: sm8250: add support for INT0_MI2S_RX and INT3_MI2S_TX

[Richard Acayan <mailingradian@gmail.com>]

The INT0_MI2S_RX and INT3_MI2S_TX ports on SDM660 can be connected to
the digital and analog WCD codecs. They can be supported with the same
logic for other ports, but just need to be explicitly stated. Add
support for these ports.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 sound/soc/qcom/sm8250.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index f193d0ba63d0..b8f1c91725df 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -112,6 +112,22 @@ static int sm8250_snd_startup(struct snd_pcm_substream *substream)
 		snd_soc_dai_set_fmt(cpu_dai, fmt);
 		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
 		break;
+	case INT0_MI2S_RX:
+		codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
+		snd_soc_dai_set_sysclk(cpu_dai,
+			Q6AFE_LPASS_CLK_ID_INT0_MI2S_IBIT,
+			MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
+		snd_soc_dai_set_fmt(cpu_dai, fmt);
+		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+		break;
+	case INT3_MI2S_TX:
+		codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
+		snd_soc_dai_set_sysclk(cpu_dai,
+			Q6AFE_LPASS_CLK_ID_INT3_MI2S_IBIT,
+			MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
+		snd_soc_dai_set_fmt(cpu_dai, fmt);
+		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+		break;
 	default:
 		break;
 	}
-- 
2.54.0