Re: [PATCH v1] dts: spacemit: set console baud rate on bpif3

[Yixun Lan <dlan@kernel.org>]

Hi Conor,

On 19:52 Thu 30 Apr     , Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> Because the default console's baud rate is not set, defconfig kernels do
> not have any serial output on this platform. Set the baud rate to
> 115200, matching what is used by U-Boot etc on this platform.
> 
> Suggested-by: Vivian Wang <wangruikang@iscas.ac.cn>
> Fixes: d60d57ab6b2a8 ("riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree")
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> CC: Rob Herring <robh@kernel.org>
> CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
> CC: Conor Dooley <conor+dt@kernel.org>
> CC: Yixun Lan <dlan@kernel.org>
> CC: devicetree@vger.kernel.org
> CC: linux-riscv@lists.infradead.org
> CC: spacemit@lists.linux.dev
> CC: linux-kernel@vger.kernel.org
> ---
>  arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 2 +-

Looks good to me, but I think the fix should also apply to other boards,
so do you want to fix other dts? I'd be fine if you keep it to BPI-F3 only


>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> index 5790d927b93db..333ac8ebf3f51 100644
> --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> @@ -19,7 +19,7 @@ aliases {
>  	};
>  
>  	chosen {
> -		stdout-path = "serial0";
> +		stdout-path = "serial0:115200n8";
>  	};
>  
>  	leds {
> -- 
> 2.53.0
> 

-- 
Yixun Lan (dlan)