From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A05103A9D89; Sun, 3 May 2026 21:49:11 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1777844951; cv=none; b=OuBNY0y4YGFxGlkYlf/3nDsysGlCIAzTjGwWHkObUTHZwx42ZSHT9/1ROfTCKsBqPKyMl3vFc2EiXu9Dzl2keOxnhZaAkv+x1/+J+tWoIkeQiRe6c3qBJn3kQ6lmrl7TEspopQD8GLnM8kRly4+LXBcEpe7IitO4ZtaquVPJsCI= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1777844951; c=relaxed/simple; bh=W+AkUfyZGl5WkQD5hknj6KJBzvaavoW3A+7PW5Xr+Qs=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=WXomxOcNoFm5yLOHffhB+won1FdTWDpTRr/qqTvbjfzLKMODLQ52mugK6JuOYPCo6rRlSMdwORziFPO9Kurn4rXed/xeC0ECWCRq58p/Zd5aDTwrL1MAKsDRJzRi4h1fUmdHXxl2yR2yD+vZunUbXbZ7EidVayX02e1PDRQaGKk= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=bFmlnqYB; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="bFmlnqYB" Received: by smtp.kernel.org (Postfix) with ESMTPS id 6FF1FC2BCF4; Sun, 3 May 2026 21:49:11 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1777844951; bh=W+AkUfyZGl5WkQD5hknj6KJBzvaavoW3A+7PW5Xr+Qs=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=bFmlnqYBC/8htmG5Ybxr/YytOMqYr/H0sGW5rlX7tyDJ4mxhRPsvYPBUth17FNh2H 9o0qqMMP1FZDYXg8/f7SZd0bMj1RqSxpje9BD5O+rhGbbY01dz0VtwDVqfzr6TL3Lc lpaRLT7WFDjKu4zg1fBtNn4whgA2NC1a6nrYPZMg9WLcxFFxwHeXa424IOYZ4J/d57 WM0evC8o3qk56zr24N52ekCwK7JKWdxGRqnIhjg15A8c1iiJ2hGtVaqWFQngPO3svk WkysyNkX+1/l+t5fBaWHh9DYlf4qhoXakZpNAhpNH8znv0tdGCHthz8w0h0CjRTnUW cu51ZL2GWnPww== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 65E3ECD3424; Sun, 3 May 2026 21:49:11 +0000 (UTC) From: Aaron Kling via B4 Relay Date: Sun, 03 May 2026 16:48:48 -0500 Subject: [PATCH v8 6/6] arm64: dts: qcom: Add AYN Thor Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20260503-ayn-qcs8550-v8-6-d733f5e57446@gmail.com> References: <20260503-ayn-qcs8550-v8-0-d733f5e57446@gmail.com> In-Reply-To: <20260503-ayn-qcs8550-v8-0-d733f5e57446@gmail.com> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Aaron Kling , Teguh Sobirin X-Mailer: b4 0.14.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1777844950; l=6227; i=webgeek1234@gmail.com; s=20250217; h=from:subject:message-id; bh=Aoe59zShJAm9LqsbtTeOAxSKG37xMv+KPZP6UxGeHpY=; b=TYhioltY1F4sjDp+a4sexWzvI1+WNixJfPSnGwIiW29GRTSg5mKyviWWUIh7Wl1gpwVm8+2ja ahxmoVuiEYOBXiSsWRAOSVxJ0hbg4uJmKF0Fj+YXSqpPQQKldJD/fvq X-Developer-Key: i=webgeek1234@gmail.com; a=ed25519; pk=TQwd6q26txw7bkK7B8qtI/kcAohZc7bHHGSD7domdrU= X-Endpoint-Received: by B4 Relay for webgeek1234@gmail.com/20250217 with auth_id=342 X-Original-From: Aaron Kling Reply-To: webgeek1234@gmail.com From: Teguh Sobirin The AYN Thor is a high-performance Android-based handheld gaming console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring dual AMOLED touchscreens. Signed-off-by: Teguh Sobirin Co-developed-by: Aaron Kling Signed-off-by: Aaron Kling --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts | 227 +++++++++++++++++++++++ 2 files changed, 228 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6bfc4554580bd5..6feecd62e01546 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -186,6 +186,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2mini.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2portal.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-thor.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts new file mode 100644 index 00000000000000..641146a9a7798e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Teguh Sobirin. + */ + +/dts-v1/; + +#include +#include +#include +#include "qcs8550-ayntec-common.dtsi" + +&{/} { + model = "AYN Thor"; + compatible = "ayntec,thor", "qcom,qcs8550", "qcom,sm8550"; + + vdd_bl_5v0: vdd-bl-5v0-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_bl_5v0"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_disp_1v8: vdd-disp-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_disp_1v8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_disp1_2v8: vdd-disp1-2v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_disp1_2v8"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_disp2_2v8: vdd-disp2-2v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_disp2_2v8"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&tlmm 143 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_ts_3v0: vdd-ts-3v0-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_ts_3v0"; + + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&tlmm 144 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_ts_1v8: vdd-ts-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_ts_1v8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio_keys { + pinctrl-0 = <&volume_up_n &key_ayn_n>; + + key-ayn { + label = "AYN Key"; + debounce-interval = <15>; + gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,can-disable; + }; + + switch-lid { + label = "Hall Lid Sensor"; + gpios = <&tlmm 17 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + wakeup-source; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@38 { + compatible = "focaltech,ft5426"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l14b_3p2>; + iovcc-supply = <&vreg_l12b_1p8>; + + pinctrl-0 = <&ts_p_rst_default &ts_p_int_default>; + pinctrl-1 = <&ts_p_rst_sleep &ts_p_int_sleep>; + pinctrl-names = "default", "sleep"; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + touchscreen-swapped-x-y; + touchscreen-inverted-x; + }; +}; + +&i2c_hub_3 { + clock-frequency = <100000>; + + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@38 { + compatible = "focaltech,ft5452"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 14 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vdd_ts_3v0>; + iovcc-supply = <&vdd_ts_1v8>; + + pinctrl-0 = <&ts_s_rst_default &ts_s_int_default>; + pinctrl-1 = <&ts_s_rst_sleep &ts_s_int_sleep>; + pinctrl-names = "default", "sleep"; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1240>; + touchscreen-swapped-x-y; + touchscreen-inverted-x; + }; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + reg = <0>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + + status = "okay"; +}; + +&mdss_dsi1_out { + qcom,te-source = "mdp_vsync_s"; +}; + +&pm8550_multi_led { + status = "disabled"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/ayntec/thor/adsp.mbn", + "qcom/sm8550/ayntec/thor/adsp_dtb.mbn"; + + status = "okay"; +}; + +&spk_amp_l { + firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin"; +}; + +&spk_amp_r { + firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin"; +}; + +&tlmm { + key_ayn_n: key-ayn-n-state { + pins = "gpio41"; + function = "gpio"; + bias-pull-up; + output-disable; + }; +}; -- 2.53.0