public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Mikhail Kalashnikov <iuncuim@gmail.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
	Yangtao Li <tiny.windzz@gmail.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@kernel.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v4 5/5] Allwinner: A523: add support for A523 THS0/1 controllers
Date: Mon,  4 May 2026 13:02:45 +0800	[thread overview]
Message-ID: <20260504050245.646078-6-iuncuim@gmail.com> (raw)
In-Reply-To: <20260504050245.646078-1-iuncuim@gmail.com>

The A523 processor has two temperature controllers, THS0 and THS1.
THS0 has only one temperature sensor, which is located in the DRAM.

THS1 does have 3 sensors:
ths1_0 - "big" cores
ths1_1 - "little" cores
ths1_2 - gpu

Add the thermal sensor configuration and the thermal zones.
Trips temperature, polling-delay and sustainable-power parameters are
derived from the manufacturer's BSP.

Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 154 ++++++++++++++++++
 1 file changed, 154 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 5afa8d92a..288a4710b 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/reset/sun55i-a523-r-ccu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -26,6 +27,7 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			reg = <0x000>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -33,6 +35,7 @@ cpu1: cpu@100 {
 			device_type = "cpu";
 			reg = <0x100>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -40,6 +43,7 @@ cpu2: cpu@200 {
 			device_type = "cpu";
 			reg = <0x200>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -47,6 +51,7 @@ cpu3: cpu@300 {
 			device_type = "cpu";
 			reg = <0x300>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -54,6 +59,7 @@ cpu4: cpu@400 {
 			device_type = "cpu";
 			reg = <0x400>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -61,6 +67,7 @@ cpu5: cpu@500 {
 			device_type = "cpu";
 			reg = <0x500>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -68,6 +75,7 @@ cpu6: cpu@600 {
 			device_type = "cpu";
 			reg = <0x600>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -75,6 +83,7 @@ cpu7: cpu@700 {
 			device_type = "cpu";
 			reg = <0x700>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -565,12 +574,46 @@ dma: dma-controller@3002000 {
 			#dma-cells = <1>;
 		};
 
+		ths1: thermal-sensor@2009400 {
+			compatible = "allwinner,sun55i-a523-ths1";
+			reg = <0x02009400 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
+			nvmem-cell-names = "calibration",
+				     "calibration-second-part";
+			#thermal-sensor-cells = <1>;
+		};
+
+		ths0: thermal-sensor@200a000 {
+			compatible = "allwinner,sun55i-a523-ths0";
+			reg = <0x0200a000 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC0>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
+			nvmem-cell-names = "calibration",
+				     "calibration-second-part";
+			#thermal-sensor-cells = <0>;
+		};
+
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun55i-a523-sid",
 				     "allwinner,sun50i-a64-sid";
 			reg = <0x03006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration0: ths-calibration0@38 {
+				reg = <0x38 0x8>;
+			};
+
+			ths_calibration1: ths-calibration1@44 {
+				reg = <0x44 0x8>;
+			};
 		};
 
 		gic: interrupt-controller@3400000 {
@@ -1087,4 +1130,115 @@ npu: npu@7122000 {
 			power-domains = <&ppu PD_NPU>;
 		};
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths1 1>;
+			sustainable-power = <1200>;
+
+			trips {
+				cpu0_threshold: cpu-trip-0 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu0_target: cpu-trip-1 {
+					temperature = <90000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu0_critical: cpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4_thermal: cpu4-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths1 0>;
+			sustainable-power = <1600>;
+
+			trips {
+				cpu4_threshold: cpu-trip-0 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu4_target: cpu-trip-1 {
+					temperature = <90000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu4_critical: cpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_target>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths1 2>;
+			sustainable-power = <2400>;
+
+			gpu-trips {
+				gpu_temp_threshold: gpu-trip-0 {
+					temperature = <60000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				gpu_temp_target: gpu-trip-1 {
+					temperature = <90000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				gpu_temp_critical: gpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths0>;
+
+			trips {
+				ddr_temp_critical: ddr-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+	};
 };
-- 
2.54.0


  parent reply	other threads:[~2026-05-04  5:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-04  5:02 [PATCH v4 0/5] Allwinner: A523: add support for A523 THS0/1 controllers Mikhail Kalashnikov
2026-05-04  5:02 ` [PATCH v4 1/5] dt-bindings: thermal: sun8i: Add " Mikhail Kalashnikov
2026-05-05 13:52   ` Chen-Yu Tsai
2026-05-04  5:02 ` [PATCH v4 2/5] thermal/drivers/sun8i: replace devm_reset_control_get to devm_reset_control_get_shared_deasserted Mikhail Kalashnikov
2026-05-05 13:52   ` Chen-Yu Tsai
2026-05-04  5:02 ` [PATCH v4 3/5] thermal/drivers/sun8i: get calibration data from two nvmem cells Mikhail Kalashnikov
2026-05-05 14:18   ` Chen-Yu Tsai
2026-05-04  5:02 ` [PATCH v4 4/5] thermal/drivers/sun8i: Add support for A523 THS0/1 controllers Mikhail Kalashnikov
2026-05-05 14:22   ` Chen-Yu Tsai
2026-05-04  5:02 ` Mikhail Kalashnikov [this message]
2026-05-05 14:06   ` [PATCH v4 5/5] Allwinner: A523: add " Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260504050245.646078-6-iuncuim@gmail.com \
    --to=iuncuim@gmail.com \
    --cc=anarsoul@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=lukasz.luba@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=samuel@sholland.org \
    --cc=tiny.windzz@gmail.com \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox