From: Rodrigo Alencar via B4 Relay <devnull+rodrigo.alencar.analog.com@kernel.org>
To: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>,
David Lechner <dlechner@baylibre.com>,
Andy Shevchenko <andy@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Andrew Morton <akpm@linux-foundation.org>,
Petr Mladek <pmladek@suse.com>,
Steven Rostedt <rostedt@goodmis.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
Sergey Senozhatsky <senozhatsky@chromium.org>,
Shuah Khan <skhan@linuxfoundation.org>,
Rodrigo Alencar <rodrigo.alencar@analog.com>
Subject: [PATCH v11 08/11] iio: frequency: adf41513: handle LE synchronization feature
Date: Wed, 06 May 2026 15:08:52 +0100 [thread overview]
Message-ID: <20260506-adf41513-iio-driver-v11-8-2b7e99cfe8f2@analog.com> (raw)
In-Reply-To: <20260506-adf41513-iio-driver-v11-0-2b7e99cfe8f2@analog.com>
From: Rodrigo Alencar <rodrigo.alencar@analog.com>
When LE sync is enabled, it must be set after powering up and it must be
disabled when powering down. It is recommended when using the PLL as
a frequency synthesizer, where reference signal will always be present
while the device is being configured.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
---
drivers/iio/frequency/adf41513.c | 35 ++++++++++++++++++++++++++++++++---
1 file changed, 32 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/frequency/adf41513.c b/drivers/iio/frequency/adf41513.c
index 04bb70f8db53..6072ceae9bfb 100644
--- a/drivers/iio/frequency/adf41513.c
+++ b/drivers/iio/frequency/adf41513.c
@@ -215,6 +215,7 @@ struct adf41513_data {
bool phase_detector_polarity;
bool logic_lvl_1v8_en;
+ bool le_sync_en;
};
struct adf41513_pll_settings {
@@ -627,13 +628,27 @@ static int adf41513_set_frequency(struct adf41513_state *st, u64 freq_uhz, u16 s
static int adf41513_suspend(struct adf41513_state *st)
{
st->regs[ADF41513_REG6] |= FIELD_PREP(ADF41513_REG6_POWER_DOWN_MSK, 1);
+ st->regs[ADF41513_REG12] &= ~ADF41513_REG12_LE_SELECT_MSK;
return adf41513_sync_config(st, ADF41513_SYNC_DIFF);
}
static int adf41513_resume(struct adf41513_state *st)
{
+ int ret;
+
st->regs[ADF41513_REG6] &= ~ADF41513_REG6_POWER_DOWN_MSK;
- return adf41513_sync_config(st, ADF41513_SYNC_DIFF);
+ ret = adf41513_sync_config(st, ADF41513_SYNC_DIFF);
+ if (ret)
+ return ret;
+
+ if (st->data.le_sync_en) {
+ st->regs[ADF41513_REG12] |= ADF41513_REG12_LE_SELECT_MSK;
+ ret = adf41513_sync_config(st, ADF41513_SYNC_DIFF);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static ssize_t adf41513_read_resolution(struct iio_dev *indio_dev,
@@ -890,6 +905,8 @@ static int adf41513_parse_fw(struct adf41513_state *st)
"invalid lock detect count: %u\n", tmp);
st->data.lock_detect_count = tmp;
+ /* load enable sync */
+ st->data.le_sync_en = device_property_read_bool(dev, "adi,le-sync-enable");
st->data.freq_resolution_uhz = MICROHZ_PER_HZ;
return 0;
@@ -897,6 +914,7 @@ static int adf41513_parse_fw(struct adf41513_state *st)
static int adf41513_setup(struct adf41513_state *st)
{
+ int ret;
u32 tmp;
memset(st->regs_hw, 0xFF, sizeof(st->regs_hw));
@@ -930,8 +948,19 @@ static int adf41513_setup(struct adf41513_state *st)
st->data.logic_lvl_1v8_en ? 0 : 1);
/* perform initialization sequence with power-up frequency */
- return adf41513_set_frequency(st, st->data.power_up_frequency_hz * MICRO,
- ADF41513_SYNC_ALL);
+ ret = adf41513_set_frequency(st, st->data.power_up_frequency_hz * MICRO,
+ ADF41513_SYNC_ALL);
+ if (ret)
+ return ret;
+
+ if (st->data.le_sync_en) {
+ st->regs[ADF41513_REG12] |= ADF41513_REG12_LE_SELECT_MSK;
+ ret = adf41513_sync_config(st, ADF41513_SYNC_DIFF);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static void adf41513_power_down(void *data)
--
2.43.0
next prev parent reply other threads:[~2026-05-06 14:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 14:08 [PATCH v11 00/11] ADF41513/ADF41510 PLL frequency synthesizers Rodrigo Alencar via B4 Relay
2026-05-06 14:08 ` [PATCH v11 01/11] dt-bindings: iio: frequency: add adf41513 Rodrigo Alencar via B4 Relay
2026-05-07 8:41 ` Rodrigo Alencar
2026-05-06 14:08 ` [PATCH v11 02/11] lib: kstrtox: add kstrtoudec64() and kstrtodec64() Rodrigo Alencar via B4 Relay
2026-05-06 20:07 ` Randy Dunlap
2026-05-06 14:08 ` [PATCH v11 03/11] lib: test-kstrtox: tests for kstrtodec64() and kstrtoudec64() Rodrigo Alencar via B4 Relay
2026-05-06 14:08 ` [PATCH v11 04/11] lib: math: div64: add div64_s64_rem() Rodrigo Alencar via B4 Relay
2026-05-06 14:08 ` [PATCH v11 05/11] iio: core: add decimal value formatting into 64-bit value Rodrigo Alencar via B4 Relay
2026-05-07 16:01 ` Jonathan Cameron
2026-05-06 14:08 ` [PATCH v11 06/11] iio: test: iio-test-format: add test case for decimal format Rodrigo Alencar via B4 Relay
2026-05-06 14:08 ` [PATCH v11 07/11] iio: frequency: adf41513: driver implementation Rodrigo Alencar via B4 Relay
2026-05-07 11:05 ` Rodrigo Alencar
2026-05-07 15:56 ` Jonathan Cameron
2026-05-06 14:08 ` Rodrigo Alencar via B4 Relay [this message]
2026-05-06 14:08 ` [PATCH v11 09/11] iio: frequency: adf41513: features on frequency change Rodrigo Alencar via B4 Relay
2026-05-07 11:19 ` Rodrigo Alencar
2026-05-06 14:08 ` [PATCH v11 10/11] docs: iio: add documentation for adf41513 driver Rodrigo Alencar via B4 Relay
2026-05-06 14:08 ` [PATCH v11 11/11] Documentation: ABI: testing: add common ABI file for iio/frequency Rodrigo Alencar via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260506-adf41513-iio-driver-v11-8-2b7e99cfe8f2@analog.com \
--to=devnull+rodrigo.alencar.analog.com@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=pmladek@suse.com \
--cc=robh@kernel.org \
--cc=rodrigo.alencar@analog.com \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox