From: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Bryan O'Donoghue <bod@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH 3/4] arm64: dts: qcom: sm6115: add venus device
Date: Thu, 07 May 2026 10:08:11 +0300 [thread overview]
Message-ID: <20260507-iris-sm6115-v1-3-0b082ad8eea8@oss.qualcomm.com> (raw)
In-Reply-To: <20260507-iris-sm6115-v1-0-0b082ad8eea8@oss.qualcomm.com>
Define the video en/decoding device present on the SM6115 platform. The
core, AR50LT, is mostly compatible with the one present on the Agatti
devices, so it uses qcom,qcm2290-venus as a fallback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 65 ++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index bd94eb87d6f9..3520802d1fed 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1853,6 +1853,71 @@ adreno_smmu: iommu@59a0000 {
#iommu-cells = <2>;
};
+ venus: video-codec@5a00000 {
+ compatible = "qcom,sm6115-venus",
+ "qcom,qcm2290-venus";
+ reg = <0x0 0x5a00000 0x0 0xf0000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&gcc GCC_VENUS_GDSC>,
+ <&gcc GCC_VCODEC0_GDSC>,
+ <&rpmpd SM6115_VDDCX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "cx";
+ operating-points-v2 = <&venus_opp_table>;
+
+ clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+ <&gcc GCC_VIDEO_AHB_CLK>,
+ <&gcc GCC_VENUS_CTL_AXI_CLK>,
+ <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+ <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+ <&gcc GCC_VCODEC0_AXI_CLK>;
+ clock-names = "core",
+ "iface",
+ "bus",
+ "throttle",
+ "vcodec0_core",
+ "vcodec0_bus";
+
+ memory-region = <&pil_video_mem>;
+ iommus = <&apps_smmu 0x860 0x0>,
+ <&apps_smmu 0x880 0x0>;
+
+ interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+ &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+ interconnect-names = "video-mem",
+ "cpu-cfg";
+
+ status = "disabled";
+
+ venus_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-133333333 {
+ opp-hz = /bits/ 64 <133333333>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+ };
+
mdss: display-subsystem@5e00000 {
compatible = "qcom,sm6115-mdss";
reg = <0x0 0x05e00000 0x0 0x1000>;
--
2.47.3
next prev parent reply other threads:[~2026-05-07 7:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-07 7:08 [PATCH 0/4] media: iris: bring up driver on SM6115-based platforms Dmitry Baryshkov
2026-05-07 7:08 ` [PATCH 1/4] clk: qcom: gcc-sm6115: Set HW_CTRL_TRIGGER for video GDSC Dmitry Baryshkov
2026-05-07 8:01 ` Konrad Dybcio
2026-05-07 7:08 ` [PATCH 2/4] media: dt-bindings: qcom,qcm2290-venus: add Venus on SM6115 Dmitry Baryshkov
2026-05-07 7:08 ` Dmitry Baryshkov [this message]
2026-05-08 10:57 ` [PATCH 3/4] arm64: dts: qcom: sm6115: add venus device Konrad Dybcio
2026-05-07 7:08 ` [PATCH 4/4] arm64: dts: qcom: qrb4210-rb2: enable " Dmitry Baryshkov
2026-05-08 10:59 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260507-iris-sm6115-v1-3-0b082ad8eea8@oss.qualcomm.com \
--to=dmitry.baryshkov@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=jorge.ramirez@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox