[PATCH v3 09/15] dt-bindings: media: qcom: Add CAMSS Offline Processing Engine (OPE)

[Loic Poulain <loic.poulain@oss.qualcomm.com>]

Add Devicetree binding documentation for the Qualcomm Camera Subsystem
Offline Processing Engine (OPE) found on platforms such as Agatti.
The OPE is a memory-to-memory image processing block which operates
on frames read from and written back to system memory.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
 .../bindings/media/qcom,qcm2290-camss-ope.yaml     | 131 +++++++++++++++++++++
 1 file changed, 131 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/qcom,qcm2290-camss-ope.yaml b/Documentation/devicetree/bindings/media/qcom,qcm2290-camss-ope.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..c91d73af61f5cbf8384be5ff9b03683de8413542
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,qcm2290-camss-ope.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,qcm2290-camss-ope.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Subsystem Offline Processing Engine
+
+maintainers:
+  - Loic Poulain <loic.poulain@oss.qualcomm.com>
+
+description:
+  The Qualcomm Camera Subsystem (CAMSS) Offline Processing Engine (OPE)
+  is a memory-to-memory image processing block. It supports a range of
+  pixel-processing operations such as scaling, cropping, gain adjustments,
+  white-balancing, and various format conversions. The OPE does not
+  interface directly with image sensors, instead, it processes frames
+  sourced from and written back to system memory.
+
+properties:
+  compatible:
+    const: qcom,qcm2290-camss-ope
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: top
+      - const: qos
+      - const: pipeline
+      - const: bus_read
+      - const: bus_write
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: data
+
+  interrupts:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: config
+      - const: data
+
+  iommus:
+    maxItems: 2
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/interconnect/qcom,rpm-icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    camss_ope: isp@5c42400 {
+        compatible = "qcom,qcm2290-camss-ope";
+
+        reg = <0x5c42400 0x200>,
+              <0x5c42600 0x200>,
+              <0x5c42800 0x4400>,
+              <0x5c46c00 0x190>,
+              <0x5c46d90 0xa00>;
+        reg-names = "top", "qos", "pipeline",
+                    "bus_read", "bus_write";
+
+        clocks = <&gcc GCC_CAMSS_OPE_CLK>,
+                 <&gcc GCC_CAMSS_OPE_AHB_CLK>,
+                 <&gcc GCC_CAMSS_NRT_AXI_CLK>;
+        clock-names = "core", "iface", "data";
+
+        interrupts = <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>;
+
+        interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+                         &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>,
+                        <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG
+                         &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+        interconnect-names = "config", "data";
+
+        iommus = <&apps_smmu 0x820 0x0>,
+                 <&apps_smmu 0x840 0x0>;
+
+        operating-points-v2 = <&ope_opp_table>;
+        power-domains = <&rpmpd QCM2290_VDDCX>;
+
+        ope_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmpd_opp_svs>;
+            };
+
+            opp-465000000 {
+                opp-hz = /bits/ 64 <465000000>;
+                required-opps = <&rpmpd_opp_nom>;
+            };
+        };
+    };

-- 
2.34.1