From: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Bryan O'Donoghue <bod@kernel.org>, Robert Foss <rfoss@kernel.org>,
Todor Tomov <todor.too@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org,
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Tingguo Cheng <tingguo.cheng@oss.qualcomm.com>
Subject: [PATCH v2 0/7] Add Hamoa Evk IMX577 camera sensor support
Date: Fri, 08 May 2026 19:39:56 +0800 [thread overview]
Message-ID: <20260508-hamoa_evk-v2-0-3ebdca3e4ae2@oss.qualcomm.com> (raw)
Hamoa EVK is based on the Qualcomm X1e80100 SoC.
It lacks a camera sensor in its default configuration.
This series enables the IMX577 sensor via CSIPHY1 through device tree overlay.
We have tested IMX577 Sensor on CCI1 with following commands:
- media-ctl -d /dev/media0 --reset
- media-ctl -d /dev/media0 -V '"imx577 1-001a":0[fmt:SRGGB10/4056x3040 field:none]'
- media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
- media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5
Dependencies: https://lore.kernel.org/all/20260507-purwa-videocc-camcc-v5-0-fc3af4130282@oss.qualcomm.com/
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
---
Changes in v2:
- Drop src clk.
- Fix typo. -- Konrad
- Port the code offor Bryan's IOMMU, CCI, and CAMSS.
- Add mclk define.
- Use the unrefactored csiphy.
- Link to v1: https://lore.kernel.org/r/20260227-hamoa_evk-v1-0-36f895a24d8f@oss.qualcomm.com
---
Bryan O'Donoghue (3):
dt-bindings: media: qcom,x1e80100-camss: Describe iommu entries
arm64: dts: qcom: x1e80100: Add CCI definitions
Add dtsi to describe the xe180100 CAMSS block
Tingguo Cheng (1):
arm64: dts: qcom: hamoa-iot-som: Add pm8010 L4M regulator
Wenmeng Liu (3):
dt-bindings: media: qcom: x1e80100-camss: drop src clock
arm64: dts: qcom: hamoa: Add camera MCLK pinctrl
arm64: dts: qcom: hamoa-iot-evk-camera-imx577: Add DT overlay
.../bindings/media/qcom,x1e80100-camss.yaml | 31 +-
arch/arm64/boot/dts/qcom/Makefile | 5 +
.../boot/dts/qcom/hamoa-iot-evk-camera-imx577.dtso | 74 +++++
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 7 +
arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 15 +
arch/arm64/boot/dts/qcom/hamoa.dtsi | 368 +++++++++++++++++++++
6 files changed, 489 insertions(+), 11 deletions(-)
---
base-commit: b25f15a8600145233c948b40cab6d7d57bac3076
change-id: 20260227-hamoa_evk-2455daf43d86
prerequisite-change-id: 20260506-purwa-videocc-camcc-fef043727e4c:v5
prerequisite-patch-id: 61bdb45446193b72dd8a4b093e4ab2f78db2f066
prerequisite-patch-id: b5be9dcbb612a14108f890b2782860847edfcbe4
prerequisite-patch-id: a03b10745ba5c628d09fc5278aef832864e31823
prerequisite-patch-id: 026db5dd71d5b0472225ba72c8ba2781334143a9
prerequisite-patch-id: fecc5a4a13c8e1c35ddd2f35e7469a327ead3b82
prerequisite-patch-id: 24424189b11acee204622997908d85a0efbb2503
Best regards,
--
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
next reply other threads:[~2026-05-08 11:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 11:39 Wenmeng Liu [this message]
2026-05-08 11:39 ` [PATCH v2 1/7] dt-bindings: media: qcom,x1e80100-camss: Describe iommu entries Wenmeng Liu
2026-05-08 11:39 ` [PATCH v2 2/7] dt-bindings: media: qcom: x1e80100-camss: drop src clock Wenmeng Liu
2026-05-08 11:39 ` [PATCH v2 3/7] arm64: dts: qcom: x1e80100: Add CCI definitions Wenmeng Liu
2026-05-08 11:40 ` [PATCH v2 4/7] Add dtsi to describe the xe180100 CAMSS block Wenmeng Liu
2026-05-08 14:23 ` Bryan O'Donoghue
2026-05-11 2:24 ` Wenmeng Liu
2026-05-08 11:40 ` [PATCH v2 5/7] arm64: dts: qcom: hamoa: Add camera MCLK pinctrl Wenmeng Liu
2026-05-08 11:40 ` [PATCH v2 6/7] arm64: dts: qcom: hamoa-iot-som: Add pm8010 L4M regulator Wenmeng Liu
2026-05-08 11:40 ` [PATCH v2 7/7] arm64: dts: qcom: hamoa-iot-evk-camera-imx577: Add DT overlay Wenmeng Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260508-hamoa_evk-v2-0-3ebdca3e4ae2@oss.qualcomm.com \
--to=wenmeng.liu@oss.qualcomm.com \
--cc=Frank.Li@nxp.com \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=tingguo.cheng@oss.qualcomm.com \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox