Devicetree
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Christian Marangi <ansuelsmth@gmail.com>,
	 Benjamin Larsson <benjamin.larsson@genexis.eu>,
	 linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,  netdev@vger.kernel.org,
	devicetree@vger.kernel.org,  Xuegang Lu <xuegang.lu@airoha.com>
Subject: [PATCH net-next v5 09/12] net: airoha: Do not stop GDM port if it is shared
Date: Sat, 09 May 2026 15:05:34 +0200	[thread overview]
Message-ID: <20260509-airoha-eth-multi-serdes-v5-9-805e38edc2aa@kernel.org> (raw)
In-Reply-To: <20260509-airoha-eth-multi-serdes-v5-0-805e38edc2aa@kernel.org>

Theoretically, in the current codebase, two independent net_devices can
be connected to the same GDM port so we need to check the GDM port is not
used by any other running net_device before setting the forward
configuration to FE_PSE_PORT_DROP.

Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/ethernet/airoha/airoha_eth.c | 39 +++++++++++++++++++++++---------
 drivers/net/ethernet/airoha/airoha_eth.h |  1 +
 2 files changed, 29 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index be31f639f4be..ebb24e60f1de 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -1718,8 +1718,8 @@ static int airoha_dev_open(struct net_device *netdev)
 	int err, len = ETH_HLEN + netdev->mtu + ETH_FCS_LEN;
 	struct airoha_gdm_dev *dev = netdev_priv(netdev);
 	struct airoha_gdm_port *port = dev->port;
+	u32 cur_len, pse_port = FE_PSE_PORT_PPE1;
 	struct airoha_qdma *qdma = dev->qdma;
-	u32 pse_port = FE_PSE_PORT_PPE1;
 
 	netif_tx_start_all_queues(netdev);
 	err = airoha_set_vip_for_gdm_port(dev, true);
@@ -1733,10 +1733,20 @@ static int airoha_dev_open(struct net_device *netdev)
 		airoha_fe_clear(qdma->eth, REG_GDM_INGRESS_CFG(port->id),
 				GDM_STAG_EN_MASK);
 
-	airoha_fe_rmw(qdma->eth, REG_GDM_LEN_CFG(port->id),
-		      GDM_SHORT_LEN_MASK | GDM_LONG_LEN_MASK,
-		      FIELD_PREP(GDM_SHORT_LEN_MASK, 60) |
-		      FIELD_PREP(GDM_LONG_LEN_MASK, len));
+	cur_len = airoha_fe_get(qdma->eth, REG_GDM_LEN_CFG(port->id),
+				GDM_LONG_LEN_MASK);
+	if (!port->users || len > cur_len) {
+		/* Opening a sibling net_device with a larger MTU updates the
+		 * MTU of already running devices. This is required to allow
+		 * multiple net_devices wht different MTUs to share the same
+		 * QDMA block.
+		 */
+		airoha_fe_rmw(qdma->eth, REG_GDM_LEN_CFG(port->id),
+			      GDM_SHORT_LEN_MASK | GDM_LONG_LEN_MASK,
+			      FIELD_PREP(GDM_SHORT_LEN_MASK, 60) |
+			      FIELD_PREP(GDM_LONG_LEN_MASK, len));
+	}
+	port->users++;
 
 	airoha_qdma_set(qdma, REG_QDMA_GLOBAL_CFG,
 			GLOBAL_CFG_TX_DMA_EN_MASK |
@@ -1766,8 +1776,10 @@ static int airoha_dev_stop(struct net_device *netdev)
 	for (i = 0; i < netdev->num_tx_queues; i++)
 		netdev_tx_reset_subqueue(netdev, i);
 
-	airoha_set_gdm_port_fwd_cfg(qdma->eth, REG_GDM_FWD_CFG(port->id),
-				    FE_PSE_PORT_DROP);
+	if (!--port->users)
+		airoha_set_gdm_port_fwd_cfg(qdma->eth,
+					    REG_GDM_FWD_CFG(port->id),
+					    FE_PSE_PORT_DROP);
 
 	if (atomic_dec_and_test(&qdma->users)) {
 		airoha_qdma_clear(qdma, REG_QDMA_GLOBAL_CFG,
@@ -1919,13 +1931,18 @@ static void airoha_dev_get_stats64(struct net_device *netdev,
 static int airoha_dev_change_mtu(struct net_device *netdev, int mtu)
 {
 	struct airoha_gdm_dev *dev = netdev_priv(netdev);
+	u32 cur_len, len = ETH_HLEN + mtu + ETH_FCS_LEN;
 	struct airoha_gdm_port *port = dev->port;
-	u32 len = ETH_HLEN + mtu + ETH_FCS_LEN;
 	struct airoha_eth *eth = dev->eth;
 
-	airoha_fe_rmw(eth, REG_GDM_LEN_CFG(port->id),
-		      GDM_LONG_LEN_MASK,
-		      FIELD_PREP(GDM_LONG_LEN_MASK, len));
+	cur_len = airoha_fe_get(eth, REG_GDM_LEN_CFG(port->id),
+				GDM_LONG_LEN_MASK);
+	if (len > cur_len || !port->users ||
+	    (port->users == 1 && netif_running(netdev)))
+		airoha_fe_rmw(eth, REG_GDM_LEN_CFG(port->id),
+			      GDM_LONG_LEN_MASK,
+			      FIELD_PREP(GDM_LONG_LEN_MASK, len));
+
 	WRITE_ONCE(netdev->mtu, mtu);
 
 	return 0;
diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
index 8d6887e33413..809f63a5d211 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.h
+++ b/drivers/net/ethernet/airoha/airoha_eth.h
@@ -554,6 +554,7 @@ struct airoha_gdm_dev {
 struct airoha_gdm_port {
 	struct airoha_gdm_dev *devs[AIROHA_MAX_NUM_GDM_DEVS];
 	int id;
+	int users;
 
 	struct airoha_hw_stats stats;
 

-- 
2.54.0


  parent reply	other threads:[~2026-05-09 13:06 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-09 13:05 [PATCH net-next v5 00/12] net: airoha: Support multiple net_devices connected to the same GDM port Lorenzo Bianconi
2026-05-09 13:05 ` [PATCH net-next v5 01/12] dt-bindings: net: airoha: Add EN7581 ethernet-ports properties Lorenzo Bianconi
2026-05-10 14:05   ` sashiko-bot
2026-05-09 13:05 ` [PATCH net-next v5 02/12] net: airoha: Reserve RX headroom to avoid skb reallocation Lorenzo Bianconi
2026-05-10 14:05   ` sashiko-bot
2026-05-09 13:05 ` [PATCH net-next v5 03/12] net: airoha: Introduce airoha_gdm_dev struct Lorenzo Bianconi
2026-05-09 13:05 ` [PATCH net-next v5 04/12] net: airoha: Move airoha_qdma pointer in " Lorenzo Bianconi
2026-05-09 13:05 ` [PATCH net-next v5 05/12] net: airoha: Rely on airoha_gdm_dev pointer in airhoa_is_lan_gdm_port() Lorenzo Bianconi
2026-05-09 13:05 ` [PATCH net-next v5 06/12] net: airoha: Move qos_sq_bmap in airoha_gdm_dev struct Lorenzo Bianconi
2026-05-10 14:05   ` sashiko-bot
2026-05-09 13:05 ` [PATCH net-next v5 07/12] net: airoha: Move {cpu,fwd}_tx_packets " Lorenzo Bianconi
2026-05-09 13:05 ` [PATCH net-next v5 08/12] net: airoha: Support multiple net_devices for a single FE GDM port Lorenzo Bianconi
2026-05-10 14:05   ` sashiko-bot
2026-05-09 13:05 ` Lorenzo Bianconi [this message]
2026-05-10 14:05   ` [PATCH net-next v5 09/12] net: airoha: Do not stop GDM port if it is shared sashiko-bot
2026-05-09 13:05 ` [PATCH net-next v5 10/12] net: airoha: Introduce WAN device flag Lorenzo Bianconi
2026-05-09 13:05 ` [PATCH net-next v5 11/12] net: airoha: Support multiple LAN/WAN interfaces for hw MAC address configuration Lorenzo Bianconi
2026-05-10 14:05   ` sashiko-bot
2026-05-09 13:05 ` [PATCH net-next v5 12/12] net: airoha: Better handle MIB for GDM with multiple port attached Lorenzo Bianconi
2026-05-10 14:05   ` sashiko-bot
2026-05-11  6:51     ` Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260509-airoha-eth-multi-serdes-v5-9-805e38edc2aa@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=benjamin.larsson@genexis.eu \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=xuegang.lu@airoha.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox