[PATCH v5 00/10] arm64: dts: lx2160a: cleanups, add new board, large pci bars

[Josua Mayer <josua@solid-run.com>]

This patch-set is made of 3 parts:

1. Extend lx2160 pci node ranges to support 16-bit, and large 64-bit
   bars. LX2160A SoC has always supported this, and SolidRun carried it
   in vendor fork for several years now.

2. Cleanup some status properties in LX2162A Clearfog dts.

3. Add description for solidrun twins baord with single LX2160A CEX-7
   module.

There are no inter-dependencies between the parts and they may apply
individually if necessary.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Changes in v5:
- add new board
- add cleanups to existing solidrun boards
- pci: extend to lx2160a-rev2 dtsi
- pci: remove non-standard flags to pass dtbs_check
- Link to v4: https://lore.kernel.org/r/20260302-lx2160-pci-v4-1-30a30dc47ec6@solid-run.com

Changes in v4
- dropped accidentally added empty line at top of file:
- actually drop RFC prefix
- rebased on v7.0-rc1 and re-tested on v7.0-rc2
- Link to v3: https://lore.kernel.org/r/20250907-lx2160-pci-v3-1-bb66cc41b8f9@solid-run.com

Changes in v3:
- dropped rfc label
- adjusted flags
- split 16GB area into 4x4GB sections.
- enhance commit description with details explanation
- Link to v2: https://lore.kernel.org/r/20240429-lx2160-pci-v2-1-1b94576d6263@solid-run.com

Changes in v2:
- adjusted flags to fix several errors during probe and bar allocation
- explicitly tested with 2 pci cards on Debian (Linux 6.1)
- still rfc because a limitation in designware pci driver
- Link to v1: https://lore.kernel.org/r/20240321-lx2160-pci-v1-1-3673708f7eb6@solid-run.com

---
Josua Mayer (10):
      arm64: dts: lx2160a: extend 32-bit, and add 64-bit pci regions
      arm64: dts: lx2162a-clearfog: use rev2 SoC dtsi
      arm64: dts: lx2162a-clearfog: cleanup superfluous status properties
      arm64: dts: lx2162a-clearfog: specify sfp ports led colour and function
      dt-bindings: arm: fsl: Add solidrun lx2160a twins board
      arm64: dts: lx2160a-clearfog-itx: remove redundant dts version tag
      arm64: dts: lx2160a-clearfog-itx: move shared includes to dts
      arm64: dts: lx2160a: add labels to thermal trip-point nodes
      arm64: dts: lx2160a-cex7: add labels to i2c buses behind mux
      arm64: dts: Add support for LX2160 Twins board in single configuration

 Documentation/devicetree/bindings/arm/fsl.yaml     |   1 +
 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 .../arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi |  12 +-
 .../boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts |   2 +
 .../dts/freescale/fsl-lx2160a-clearfog-itx.dtsi    |   3 -
 .../boot/dts/freescale/fsl-lx2160a-half-twins.dts  | 822 +++++++++++++++++++++
 .../boot/dts/freescale/fsl-lx2160a-honeycomb.dts   |   2 +
 .../arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi |  30 +-
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  61 +-
 .../boot/dts/freescale/fsl-lx2162a-clearfog.dts    |  37 +-
 10 files changed, 909 insertions(+), 63 deletions(-)
---
base-commit: 254f49634ee16a731174d2ae34bc50bd5f45e731
change-id: 20240118-lx2160-pci-4bdb196e58f3

Best regards,
-- 
Josua Mayer <josua@solid-run.com>