Devicetree
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
	Pavel Machek <pavel@kernel.org>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	David Lechner <dlechner@baylibre.com>,
	Tony Lindgren <tony@atomide.com>
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
Subject: [PATCH v5 5/6] mfd: motorola-cpcap: diverge configuration per-board
Date: Sun, 10 May 2026 14:08:03 +0300	[thread overview]
Message-ID: <20260510110804.33045-6-clamor95@gmail.com> (raw)
In-Reply-To: <20260510110804.33045-1-clamor95@gmail.com>

MFD have rigid subdevice structure which does not allow flexible dynamic
subdevice linking. Address this by diverging CPCAP subdevice composition
to take into account board specific configuration.

Create a common default subdevice composition, rename existing subdevice
composition into cpcap_mapphone_mfd_devices since it targets mainly
Mapphone board.

Removed st,6556002 as it is no longer applicable to all cases and
duplicates motorola,cpcap, which is used as the default composition.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/mfd/motorola-cpcap.c       | 142 ++++++++++++++++-------------
 include/linux/mfd/motorola-cpcap.h |   6 ++
 2 files changed, 87 insertions(+), 61 deletions(-)

diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
index d8243b956f87..f5a7fdd89dd5 100644
--- a/drivers/mfd/motorola-cpcap.c
+++ b/drivers/mfd/motorola-cpcap.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/sysfs.h>
 
@@ -30,6 +31,7 @@ struct cpcap_ddata {
 	struct regmap_irq_chip_data *irqdata[CPCAP_NR_IRQ_CHIPS];
 	const struct regmap_config *regmap_conf;
 	struct regmap *regmap;
+	enum cpcap_variant variant;
 };
 
 static int cpcap_sense_irq(struct regmap *regmap, int irq)
@@ -195,20 +197,6 @@ static int cpcap_init_irq(struct cpcap_ddata *cpcap)
 	return 0;
 }
 
-static const struct of_device_id cpcap_of_match[] = {
-	{ .compatible = "motorola,cpcap", },
-	{ .compatible = "st,6556002", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, cpcap_of_match);
-
-static const struct spi_device_id cpcap_spi_ids[] = {
-	{ .name = "cpcap", },
-	{ .name = "6556002", },
-	{},
-};
-MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
-
 static const struct regmap_config cpcap_regmap_config = {
 	.reg_bits = 16,
 	.reg_stride = 4,
@@ -241,62 +229,76 @@ static int cpcap_resume(struct device *dev)
 
 static DEFINE_SIMPLE_DEV_PM_OPS(cpcap_pm, cpcap_suspend, cpcap_resume);
 
-static const struct mfd_cell cpcap_mfd_devices[] = {
-	{
-		.name          = "cpcap_adc",
-		.of_compatible = "motorola,mapphone-cpcap-adc",
-	}, {
-		.name          = "cpcap_battery",
-		.of_compatible = "motorola,cpcap-battery",
-	}, {
-		.name          = "cpcap-charger",
-		.of_compatible = "motorola,mapphone-cpcap-charger",
-	}, {
-		.name          = "cpcap-regulator",
-		.of_compatible = "motorola,mapphone-cpcap-regulator",
-	}, {
-		.name          = "cpcap-rtc",
-		.of_compatible = "motorola,cpcap-rtc",
-	}, {
-		.name          = "cpcap-pwrbutton",
-		.of_compatible = "motorola,cpcap-pwrbutton",
-	}, {
-		.name          = "cpcap-usb-phy",
-		.of_compatible = "motorola,mapphone-cpcap-usb-phy",
-	}, {
-		.name          = "cpcap-led",
-		.id            = 0,
-		.of_compatible = "motorola,cpcap-led-red",
-	}, {
-		.name          = "cpcap-led",
-		.id            = 1,
-		.of_compatible = "motorola,cpcap-led-green",
-	}, {
-		.name          = "cpcap-led",
-		.id            = 2,
-		.of_compatible = "motorola,cpcap-led-blue",
-	}, {
-		.name          = "cpcap-led",
-		.id            = 3,
-		.of_compatible = "motorola,cpcap-led-adl",
-	}, {
-		.name          = "cpcap-led",
-		.id            = 4,
-		.of_compatible = "motorola,cpcap-led-cp",
-	}, {
-		.name          = "cpcap-codec",
-	}
+static const struct mfd_cell cpcap_default_mfd_devices[] = {
+	MFD_CELL_OF("cpcap_adc", NULL, NULL, 0, 0, "motorola,cpcap-adc"),
+	MFD_CELL_OF("cpcap_battery", NULL, NULL, 0, 0,
+		    "motorola,cpcap-battery"),
+	MFD_CELL_OF("cpcap-regulator", NULL, NULL, 0, 0,
+		    "motorola,cpcap-regulator"),
+	MFD_CELL_OF("cpcap-rtc", NULL, NULL, 0, 0, "motorola,cpcap-rtc"),
+	MFD_CELL_OF("cpcap-pwrbutton", NULL, NULL, 0, 0,
+		    "motorola,cpcap-pwrbutton"),
+	MFD_CELL_OF("cpcap-usb-phy", NULL, NULL, 0, 0,
+		    "motorola,cpcap-usb-phy"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 0, "motorola,cpcap-led-red"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 1, "motorola,cpcap-led-green"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 2, "motorola,cpcap-led-blue"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 3, "motorola,cpcap-led-adl"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 4, "motorola,cpcap-led-cp"),
+	MFD_CELL_NAME("cpcap-codec"),
+};
+
+static const struct mfd_cell cpcap_mapphone_mfd_devices[] = {
+	MFD_CELL_OF("cpcap_adc", NULL, NULL, 0, 0,
+		    "motorola,mapphone-cpcap-adc"),
+	MFD_CELL_OF("cpcap_battery", NULL, NULL, 0, 0,
+		    "motorola,cpcap-battery"),
+	MFD_CELL_OF("cpcap-charger", NULL, NULL, 0, 0,
+		    "motorola,mapphone-cpcap-charger"),
+	MFD_CELL_OF("cpcap-regulator", NULL, NULL, 0, 0,
+		    "motorola,mapphone-cpcap-regulator"),
+	MFD_CELL_OF("cpcap-rtc", NULL, NULL, 0, 0, "motorola,cpcap-rtc"),
+	MFD_CELL_OF("cpcap-pwrbutton", NULL, NULL, 0, 0,
+		    "motorola,cpcap-pwrbutton"),
+	MFD_CELL_OF("cpcap-usb-phy", NULL, NULL, 0, 0,
+		    "motorola,mapphone-cpcap-usb-phy"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 0, "motorola,cpcap-led-red"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 1, "motorola,cpcap-led-green"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 2, "motorola,cpcap-led-blue"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 3, "motorola,cpcap-led-adl"),
+	MFD_CELL_OF("cpcap-led", NULL, NULL, 0, 4, "motorola,cpcap-led-cp"),
+	MFD_CELL_NAME("cpcap-codec"),
 };
 
 static int cpcap_probe(struct spi_device *spi)
 {
 	struct cpcap_ddata *cpcap;
+	const struct mfd_cell *cells;
+	unsigned int num_cells;
 	int ret;
 
 	cpcap = devm_kzalloc(&spi->dev, sizeof(*cpcap), GFP_KERNEL);
 	if (!cpcap)
 		return -ENOMEM;
 
+	cpcap->variant = (enum cpcap_variant)spi_get_device_match_data(spi);
+	if (!cpcap->variant)
+		return -ENODEV;
+
+	switch (cpcap->variant) {
+	case CPCAP_DEFAULT:
+		cells = cpcap_default_mfd_devices;
+		num_cells = ARRAY_SIZE(cpcap_default_mfd_devices);
+		break;
+	case CPCAP_MAPPHONE:
+		cells = cpcap_mapphone_mfd_devices;
+		num_cells = ARRAY_SIZE(cpcap_mapphone_mfd_devices);
+		break;
+	default:
+		return dev_err_probe(&spi->dev, -EINVAL,
+				     "Unknown device %d\n", cpcap->variant);
+	}
+
 	cpcap->spi = spi;
 	spi_set_drvdata(spi, cpcap);
 
@@ -331,10 +333,28 @@ static int cpcap_probe(struct spi_device *spi)
 	spi->dev.coherent_dma_mask = 0;
 	spi->dev.dma_mask = &spi->dev.coherent_dma_mask;
 
-	return devm_mfd_add_devices(&spi->dev, 0, cpcap_mfd_devices,
-				    ARRAY_SIZE(cpcap_mfd_devices), NULL, 0, NULL);
+	return devm_mfd_add_devices(&spi->dev, 0, cells, num_cells, NULL, 0, NULL);
 }
 
+static const struct of_device_id cpcap_of_match[] = {
+	{
+		.compatible = "motorola,cpcap",
+		.data = (void *)CPCAP_DEFAULT
+	}, {
+		.compatible = "motorola,mapphone-cpcap",
+		.data = (void *)CPCAP_MAPPHONE
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cpcap_of_match);
+
+static const struct spi_device_id cpcap_spi_ids[] = {
+	{ "cpcap", CPCAP_DEFAULT },
+	{ "mapphone-cpcap", CPCAP_MAPPHONE },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
+
 static struct spi_driver cpcap_driver = {
 	.driver = {
 		.name = "cpcap-core",
diff --git a/include/linux/mfd/motorola-cpcap.h b/include/linux/mfd/motorola-cpcap.h
index 981e5777deb7..1a85b06272c8 100644
--- a/include/linux/mfd/motorola-cpcap.h
+++ b/include/linux/mfd/motorola-cpcap.h
@@ -25,6 +25,12 @@
 #define CPCAP_REVISION_2_0	0x10
 #define CPCAP_REVISION_2_1	0x11
 
+enum cpcap_variant {
+	CPCAP_DEFAULT = 1,
+	CPCAP_MAPPHONE,
+	CPCAP_MAX
+};
+
 /* CPCAP registers */
 #define CPCAP_REG_INT1		0x0000	/* Interrupt 1 */
 #define CPCAP_REG_INT2		0x0004	/* Interrupt 2 */
-- 
2.51.0


  parent reply	other threads:[~2026-05-10 11:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-10 11:07 [PATCH v5 0/6] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
2026-05-10 11:07 ` [PATCH v5 1/6] dt-bindings: leds: leds-cpcap: convert to DT schema Svyatoslav Ryhel
2026-05-10 12:44   ` Rob Herring (Arm)
2026-05-10 11:08 ` [PATCH v5 2/6] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
2026-05-10 12:44   ` Rob Herring (Arm)
2026-05-10 11:08 ` [PATCH v5 3/6] dt-bindings: mfd: motorola-cpcap: " Svyatoslav Ryhel
2026-05-10 11:08 ` [PATCH v5 4/6] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP Svyatoslav Ryhel
2026-05-10 11:08 ` Svyatoslav Ryhel [this message]
2026-05-10 11:08 ` [PATCH v5 6/6] mfd: motorola-cpcap: add support for Mot CPCAP composition Svyatoslav Ryhel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260510110804.33045-6-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@kernel.org \
    --cc=robh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox