From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pg1-f173.google.com (mail-pg1-f173.google.com [209.85.215.173]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6E4A62D8393 for ; Sun, 10 May 2026 20:27:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.215.173 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1778444831; cv=none; b=Q586p3x7t6Errqk37qJGaa3P3imyfKJyLTld8QCymEK94jST57PyeKlacshkXN4+UqiH07G20JMgVMqYS1HuckF/SsuxNQG48zgFZ4igZ+z9YnBMLznkNbFmnQF3guxqzYF5xsSZFZbSHSN55eGgQMDnSuC3pbygwQIw52mVhSo= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1778444831; c=relaxed/simple; bh=yI719AbpDItm5QLKSF7cXjqJwwvZK5DfBOkIkRgOrVw=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=q0woZ4rq+ADIuAGNt+aoJnyrN+1k4l3rzxnr/sydx3uUFkZ6Lv2/gMDv8xQuQa02dq4aH+Rbe2rGA8V/ooH9rVWzDrxMLP8AMrAxIMm5RbnE2fiNmTWK8o5UUlrHVQoBm10WkKWO1GYLo7NKNTY2QLFLfIB4rNZTfxX8CJVSgb4= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=p+/HRigZ; arc=none smtp.client-ip=209.85.215.173 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="p+/HRigZ" Received: by mail-pg1-f173.google.com with SMTP id 41be03b00d2f7-c8021c8c42fso1340947a12.3 for ; Sun, 10 May 2026 13:27:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1778444829; x=1779049629; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=op2elmZ9t9E3doPcSF3XGeDi060lHA3vYpa7Xkj8Lag=; b=p+/HRigZdIt+ZC08X1h5x+SfJi7EIEMW2KrqEhyMTE+m7D8Pnm/2AVS1nRo7qN2xM4 xd7Hlu0uUO2tw5norzxYjGTRY285tXVckRRVsMRGwAZ79u1U0Mv81BlJmxSq4dDM9HrI ZA+m+tcPWoGWQoaY5Kb9Q7gfK5bfpIsFLUAUaX7xvICo7ScKka5aKalyvf8ldlj04Q0B AMEhGC57Xov8sPIwFM1WnBsRh/9CBa2EflzKXgcukbOCzqmGXa3pTZn80mN8p1fKCs+x bF7Od2j1uGzN4M9aRwEAr73W87S4o2XPkR/p1oE32D3Vi1GclHB9D9vYvCbXP2rBpntU o9qw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1778444829; x=1779049629; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to; bh=op2elmZ9t9E3doPcSF3XGeDi060lHA3vYpa7Xkj8Lag=; b=T/d9CCp0TYXAtrms59tgouexZiY61r1YPg9bYuLjeSb/SiL0JFrU7Lh+SBRlF6lsE4 5rXF/SSXZINTdlHGxRowstmsHDGCh1IYgmsxR63/3j07XaQBSlQa33qgpNfGH3VX/dO0 gXYBSzJ1si28m5Sn2l0v3mmu5OLsf2PGJ7OBm8Q96w2VHtjNQjT7PUqfY+04xIawAndx qukdcwqXgKltc/9OREKgCMQjnjMAIehZD6YiwHa6dD8LJPwPwFzM792DJWuq+7h4DrpE XdjRsgNdrUzvgOpDdHhoe/x6262AdocsjrT/9ahidWmkPZAdVpTy/iRsurkOfPCxeuJb wxPQ== X-Forwarded-Encrypted: i=1; AFNElJ/i3WEFwFE7CWHgLvsAXmP7BQjIqGQJTHthk0XsG4GDygtPQumuJlt7oAo9OoO4KDmcL0dheFSIZKlm@vger.kernel.org X-Gm-Message-State: AOJu0YxgfSkgowyP9PjdiKDcqaRxg29DX9Pi5v4bs9m/Qwmixw4Ri2zy wgfkoqLeGxRIWYiJBXt90OEWIWCRu403lmg/zOMQA4eUMADr+TdY43zV X-Gm-Gg: Acq92OHuaAwki1czlNlNxTPPdZDr/27AQAAZggQaFTj4nxGI1p/Scr7gaVzTKzxtlJU Rkdp4UL0iAowIsa+nvWZ3yiN0DTOwzb7AqiCtdLvuYKRerrRwHWf6SL+6vtFavyCaYKG0ylzY8/ 7ZwCTBLmuytKrmdVa6L50Bw10vSyYinzm6gskyAMLiJGWF6O9DbKVqv0xveQZKQLN9vDsaCMhGS Tk1LAxLSGgGvbAYrFS6VnXdGrmqJPd+KMqh8N8Mjuj5n24F2Dfck4TlA5HcYipuyW5vF4xRx0rd dU7wroRWWMFUVPYP7aFFh7ljegqPYac/75XtXs5v4yRDC/VkczMIY1hXywm19pMd8EAkHBLNqpJ NSIZyP5k4C4mpPqT+lAoiepo6r5PYpFsbPF8RIJ/v/4Itp5SIaFWVpg2iUHmLXpR9PCJyFYoZVy OCeqWvpTv+4K9GtvE3/HsyHOZU1Zp2BbiI01Hb+nMAbyraIPUuRfE4z40+y4yn/NRxEOwIcj5Up M+9tt1BSle6a6ABein6V+HZOmyKapFluDSdjpmA51jERdT2Rzwu+nTXx70wQE1zH9t++6E= X-Received: by 2002:a05:6a20:734b:b0:3a2:ecb8:56db with SMTP id adf61e73a8af0-3aab17b53dbmr12950078637.40.1778444828682; Sun, 10 May 2026 13:27:08 -0700 (PDT) Received: from lord-daniel-VivoBook-ASUSLaptop-K3502ZA-S3502ZA.www.tendawifi.com ([14.139.108.62]) by smtp.gmail.com with ESMTPSA id 41be03b00d2f7-c826767bf53sm7060073a12.6.2026.05.10.13.27.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 10 May 2026 13:27:08 -0700 (PDT) From: Piyush Patle To: ak@it-klinger.de, jic23@kernel.org Cc: andriy.shevchenko@intel.com, dlechner@baylibre.com, nuno.sa@analog.com, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v7 11/11] iio: adc: hx711: add support for HX710B Date: Mon, 11 May 2026 01:56:55 +0530 Message-ID: <20260510202657.38326-1-piyushpatle228@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20260510194947.31997-1-piyushpatle228@gmail.com> References: <20260510194947.31997-1-piyushpatle228@gmail.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add support for the AVIA HX710B ADC, which shares the HX711 GPIO interface but uses trailing PD_SCK pulses to select the active mode. Model the HX710B with variant-specific channel tables and IIO info, track the active channel across conversions, and use the fixed gain value when computing scale. Also update the adjacent Kconfig text, file header, and module description so the driver text matches the newly supported variant. Signed-off-by: Piyush Patle Reviewed-by: Andy Shevchenko --- drivers/iio/adc/Kconfig | 8 +- drivers/iio/adc/hx711.c | 179 +++++++++++++++++++++++++++++++++++----- 2 files changed, 163 insertions(+), 24 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index a9dedbb8eb46..38ba8cae13f1 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -791,13 +791,15 @@ config HI8435 called hi8435. config HX711 - tristate "AVIA HX711 ADC for weight cells" + tristate "AVIA HX711 and compatible ADCs" depends on GPIOLIB select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - If you say yes here you get support for AVIA HX711 ADC which is used - for weigh cells + If you say Y here you get support for the following AVIA ADCs: + - HX710B + - HX711 + which are used for bridge sensors such as weigh cells. This driver uses two GPIOs, one acts as the clock and controls the channel selection and gain, the other one is used for the measurement diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c index 860f8ef5a7cf..d96915902108 100644 --- a/drivers/iio/adc/hx711.c +++ b/drivers/iio/adc/hx711.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * HX711: analog to digital converter for weight sensor module + * HX711 and compatible ADCs driver for weigh sensor modules * * Copyright (c) 2016 Andreas Klinger */ @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -84,12 +85,16 @@ static int hx711_get_scale_to_gain(const int *gain_scale, int scale) * @channels: channel specification array * @iio_info: IIO info ops for this variant * @num_channels: number of entries in @channels + * @fixed_gain_val: fixed PGA gain (used when @has_fixed_gain is true) + * @has_fixed_gain: true if the variant has a fixed ADC gain */ struct hx711_chip_info { const char *name; const struct iio_chan_spec *channels; const struct iio_info *iio_info; unsigned int num_channels; + unsigned int fixed_gain_val; + bool has_fixed_gain; }; struct hx711_data { @@ -99,14 +104,22 @@ struct hx711_data { int gain_set; /* gain set on device */ int gain_chan_a; /* gain for channel A */ int gain_scale[HX711_GAIN_MAX]; + int channel_set; /* HX710B active channel */ const struct hx711_chip_info *chip_info; struct mutex lock; /* * triggered buffer - * 2x32-bit channel + 64-bit naturally aligned timestamp + * up to 3x32-bit channels + 64-bit naturally aligned timestamp + * + * aligned_s64 satisfies the 8-byte alignment requirement for the + * timestamp. For HX711 (at most 2 active channels), iio_push_to_ + * buffers_with_timestamp() places the timestamp at offset 8 + * (scan_bytes=8, already 8-byte aligned), identical to the original + * 2-channel layout. The extra channel slot for HX710B does not affect + * the HX711 ABI. */ struct { - u32 channel[2]; + u32 channel[3]; aligned_s64 timestamp; } buffer; /* @@ -207,6 +220,7 @@ static int hx711_wait_for_ready(struct hx711_data *hx711_data) static int hx711_reset(struct hx711_data *hx711_data) { + const struct hx711_chip_info *info = hx711_data->chip_info; int val; val = hx711_wait_for_ready(hx711_data); @@ -226,8 +240,11 @@ static int hx711_reset(struct hx711_data *hx711_data) val = hx711_wait_for_ready(hx711_data); - /* after a reset the gain is 128 */ - hx711_data->gain_set = HX711_RESET_GAIN; + if (info->has_fixed_gain) + hx711_data->channel_set = 0; + else + /* after a reset the gain is 128 */ + hx711_data->gain_set = HX711_RESET_GAIN; } return val; @@ -283,9 +300,36 @@ static int hx711_set_hx711_channel(struct hx711_data *hx711_data, return 0; } +/* + * Switch the HX710B to the requested channel for the next conversion. + * chan->address holds the trailing pulse count (Table 3 in datasheet). + * channel_set is updated only after both reads succeed. + */ +static int hx711_set_hx710b_channel(struct hx711_data *hx711_data, + const struct iio_chan_spec *chan) +{ + int ret; + + if (hx711_data->channel_set == chan->channel) + return 0; + + ret = hx711_read(hx711_data, chan->address); + if (ret < 0) + return ret; + + ret = hx711_wait_for_ready(hx711_data); + if (ret) + return ret; + + hx711_data->channel_set = chan->channel; + + return 0; +} + static int hx711_reset_read(struct hx711_data *hx711_data, const struct iio_chan_spec *chan) { + const struct hx711_chip_info *info = hx711_data->chip_info; int trailing_pulses; int ret; @@ -298,9 +342,16 @@ static int hx711_reset_read(struct hx711_data *hx711_data, return -EIO; } - ret = hx711_set_hx711_channel(hx711_data, chan, &trailing_pulses); - if (ret < 0) - return ret; + if (info->has_fixed_gain) { + ret = hx711_set_hx710b_channel(hx711_data, chan); + if (ret < 0) + return ret; + trailing_pulses = chan->address; + } else { + ret = hx711_set_hx711_channel(hx711_data, chan, &trailing_pulses); + if (ret < 0) + return ret; + } return hx711_read(hx711_data, trailing_pulses); } @@ -462,6 +513,10 @@ static const struct iio_info hx711_iio_info = { .attrs = &hx711_attribute_group, }; +static const struct iio_info hx710b_iio_info = { + .read_raw = hx711_read_raw, +}; + static const struct iio_chan_spec hx711_chan_spec[] = { { .type = IIO_VOLTAGE, @@ -494,6 +549,68 @@ static const struct iio_chan_spec hx711_chan_spec[] = { IIO_CHAN_SOFT_TIMESTAMP(2), }; +/* + * HX710B channels (Table 3 in datasheet). + * 25 pulses (1 trailing): differential input, 10 SPS -> channel 0 + * 26 pulses (2 trailing): DVDD-AVDD supply monitor, 40 SPS -> channel 2 + * 27 pulses (3 trailing): differential input, 40 SPS -> channel 3 + * .address stores the trailing pulse count for hx711_set_hx710b_channel(). + * Channel 2 is used for the supply monitor to avoid aliasing the + * channel2 terminal of the first differential pair. + */ +static const struct iio_chan_spec hx710b_chan_spec[] = { + { + .type = IIO_VOLTAGE, + .differential = 1, + .channel = 0, + .channel2 = 1, + .indexed = 1, + .address = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_VOLTAGE, + .channel = 2, + .indexed = 1, + .address = 2, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_VOLTAGE, + .differential = 1, + .channel = 3, + .channel2 = 4, + .indexed = 1, + .address = 3, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + static const struct hx711_chip_info hx711_chip = { .name = "hx711", .channels = hx711_chan_spec, @@ -501,6 +618,15 @@ static const struct hx711_chip_info hx711_chip = { .num_channels = ARRAY_SIZE(hx711_chan_spec), }; +static const struct hx711_chip_info hx710b_chip = { + .name = "hx710b", + .channels = hx710b_chan_spec, + .iio_info = &hx710b_iio_info, + .num_channels = ARRAY_SIZE(hx710b_chan_spec), + .fixed_gain_val = 128, + .has_fixed_gain = true, +}; + static int hx711_probe(struct platform_device *pdev) { const struct hx711_chip_info *chip_info; @@ -543,32 +669,42 @@ static int hx711_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(hx711_data->gpiod_dout), "failed to get dout-gpiod\n"); - ret = devm_regulator_get_enable_read_voltage(dev, "avdd"); + if (chip_info->has_fixed_gain) + ret = devm_regulator_get_enable_read_voltage(dev, "vref"); + else + ret = devm_regulator_get_enable_read_voltage(dev, "avdd"); if (ret < 0) return ret; /* - * with - * full scale differential input range: AVDD / GAIN + * With + * full scale differential input range: reference / GAIN * full scale output data: 2^24 * we can say: - * AVDD / GAIN = 2^24 + * reference / GAIN = 2^24 * therefore: - * 1 LSB = AVDD / GAIN / 2^24 - * AVDD is in uV, but we need 10^-9 mV + * 1 LSB = reference / GAIN / 2^24 + * reference is in uV, but we need 10^-9 mV * approximately to fit into a 32 bit number: - * 1 LSB = (AVDD * 100) / GAIN / 1678 [10^-9 mV] + * 1 LSB = (reference * 100) / GAIN / 1678 [10^-9 mV] */ /* we need 10^-9 mV */ ret *= 100; - for (i = 0; i < HX711_GAIN_MAX; i++) - hx711_data->gain_scale[i] = - ret / hx711_gain_to_scale[i].gain / 1678; + if (chip_info->has_fixed_gain) { + for (i = 0; i < HX711_GAIN_MAX; i++) + hx711_data->gain_scale[i] = + ret / chip_info->fixed_gain_val / 1678; + hx711_data->gain_set = chip_info->fixed_gain_val; + } else { + for (i = 0; i < HX711_GAIN_MAX; i++) + hx711_data->gain_scale[i] = + ret / hx711_gain_to_scale[i].gain / 1678; - hx711_data->gain_set = 128; - hx711_data->gain_chan_a = 128; + hx711_data->gain_set = 128; + hx711_data->gain_chan_a = 128; + } hx711_data->clock_frequency = 400000; ret = device_property_read_u32(&pdev->dev, "clock-frequency", @@ -607,6 +743,7 @@ static int hx711_probe(struct platform_device *pdev) } static const struct of_device_id of_hx711_match[] = { + { .compatible = "avia,hx710b", .data = &hx710b_chip }, { .compatible = "avia,hx711", .data = &hx711_chip }, { } }; @@ -624,7 +761,7 @@ static struct platform_driver hx711_driver = { module_platform_driver(hx711_driver); MODULE_AUTHOR("Andreas Klinger "); -MODULE_DESCRIPTION("HX711 bitbanging driver - ADC for weight cells"); +MODULE_DESCRIPTION("HX711 and compatible bitbanging ADC driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:hx711-gpio"); -- 2.43.0