From: Abel Vesa <abel.vesa@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Abel Vesa <abel.vesa@oss.qualcomm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v4 0/3] arm64: dts: qcom: eliza: Add ADSP and USB support
Date: Wed, 13 May 2026 12:18:18 +0300 [thread overview]
Message-ID: <20260513-eliza-adsp-usb-v4-0-839936e89aca@oss.qualcomm.com> (raw)
This series adds the ADSP and USB related description for the Qualcomm
Eliza platform.
The SoC dtsi gains the ADSP remoteproc node and its communication
dependencies, including IPCC, SMP2P and the AOSS QMP channel. It also
describes the USB controller, the SNPS eUSB2 PHY and the USB3/DP QMP
combo PHY.
The board dts then enables the ADSP and USB stack on the Eliza MTP,
including the Type-C connector graph, PMIC GLINK integration and the
PM7550BA eUSB2 repeater.
The following patchsets document all necessary bindings:
https://lore.kernel.org/all/20260504-eliza-bindings-phy-eusb2-v2-1-fa3a1fd65ab1@oss.qualcomm.com/
https://lore.kernel.org/all/20260504-eliza-bindings-qmp-phy-v2-1-849c4de8d75f@oss.qualcomm.com/
https://lore.kernel.org/all/20260504-eliza-bindings-aoss-v2-1-c3628ca79a25@oss.qualcomm.com/
https://lore.kernel.org/all/20260504-eliza-bindings-pmic-glink-v2-1-d6b5397b7899@oss.qualcomm.com/
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
Changes in v4:
- Picked up Dmitry's R-b tags
- Replaced PM7750BA with PM7550BA in the commit messages.
- Put one entry per line for the repeater compatible, like Dmitry
suggested.
- Link to v3: https://patch.msgid.link/20260512-eliza-adsp-usb-v3-0-6420282841c2@oss.qualcomm.com
Changes in v3:
- Rebased on next-20260508.
- Picked up Konrad's and Krzysztof's R-b and T-b tags which I forgot
to fetch from v1 thread.
- Link to v2: https://patch.msgid.link/20260504-eliza-adsp-usb-v2-0-18e0b0b0407f@oss.qualcomm.com
Changes in v2:
- Rebased on next-20260430.
- Changed the HS PHY ref clock to TCSR_USB2_CLKREF_EN, as suggested by
Konrad.
- Changed the HS PHY VDD supply to L7K instead of L2B.
- Dropped the dr_mode property from the controller for MTP board, as
suggested by Konrad.
- Re-worded the cover with more info and updated the bindings required
patchsets list.
- Link to v1: https://patch.msgid.link/20260331-eliza-adsp-usb-v1-0-d8a251be20c3@oss.qualcomm.com
---
Abel Vesa (3):
arm64: dts: qcom: eliza: Describe the ADSP and USB related nodes
arm64: dts: qcom: Add Eliza-specific PM7550BA dtsi
arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support
arch/arm64/boot/dts/qcom/eliza-mtp.dts | 81 +++++++++
arch/arm64/boot/dts/qcom/eliza.dtsi | 261 +++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pm7550ba-eliza.dtsi | 70 +++++++
3 files changed, 412 insertions(+)
---
base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
change-id: 20260330-eliza-adsp-usb-8ef2b1b0fc13
Best regards,
--
Abel Vesa <abel.vesa@oss.qualcomm.com>
next reply other threads:[~2026-05-13 9:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-13 9:18 Abel Vesa [this message]
2026-05-13 9:18 ` [PATCH v4 1/3] arm64: dts: qcom: eliza: Describe the ADSP and USB related nodes Abel Vesa
2026-05-13 9:43 ` Konrad Dybcio
2026-05-13 9:18 ` [PATCH v4 2/3] arm64: dts: qcom: Add Eliza-specific PM7550BA dtsi Abel Vesa
2026-05-13 9:18 ` [PATCH v4 3/3] arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260513-eliza-adsp-usb-v4-0-839936e89aca@oss.qualcomm.com \
--to=abel.vesa@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox