From: Josua Mayer <josua@solid-run.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>
Cc: Yazan Shhady <yazan.shhady@solid-run.com>,
Mikhail Anikin <mikhail.anikin@solid-run.com>,
Alexander Dahl <ada@thorsis.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Conor Dooley <conor.dooley@microchip.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
netdev@vger.kernel.org, Josua Mayer <josua@solid-run.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v5 0/2] arm64: dts: imx8dxl: Add SolidRun SoM and HummingBoard
Date: Wed, 13 May 2026 12:32:29 +0200 [thread overview]
Message-ID: <20260513-imx8dxl-sr-som-v5-0-d0899b371c38@solid-run.com> (raw)
Add bindings and description for SolidRUn i.MX8DXL based SoM and
HummingBoard Telematics.
Modify SJA1110 Ethernet Switch bindings to allow SPI Mode 0.
This patch-set is based on v7.0-rc2, because rc1 was experiencing
deadlocks with imx8qxp clock driver.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Changes in v5:
- Change cpu port phy-mode to rgmii-id, and set zero delays. Delays are
added by connected ethernet switch port.
- Added ethernet aliases for all switch ports.
- Removed undocumented reset-duration-us property from usb modem node.
- Fix T1 interface count in commit message.
- Change USB-A Port dr_mode to host.
- Add cap-sdio-irq for wifi.
- Link to v4: https://lore.kernel.org/r/20260511-imx8dxl-sr-som-v4-0-64381b3bf80d@solid-run.com
Changes in v4:
- picked up acked-by adnrew lunn
- Link to v3: https://lore.kernel.org/r/20260430-imx8dxl-sr-som-v3-0-ce2b86cf75bc@solid-run.com
Changes in v3:
- rebased on v7.1-rc1.
- dropped dsa swtch port labels, should be handled by udev rules if
required.
- Fixed spelling error in alias comment.
- Dropped superfluous status okay properties from switch sub-nodes.
- Link to v2: https://lore.kernel.org/r/20260409-imx8dxl-sr-som-v2-0-83ff20629ba0@solid-run.com
Changes in v2:
- Dropped accidental change to unrelated imx8mp-sr-som.dtsi file.
- Fixed phy-mode on fixed link between cpu and ethernet switch.
(Reported-by: Andrew Lunn <andrew@lunn.ch>)
- Removed spi-cpol property from ethernet-switch on spi bus, fixing
sja1110a driver probe.
- Changed SJA1110 bindings to allow removing spi-cpol property.
- Aligned comments on all ethernet switch port nodes to be consistent.
- Dropped regulator-always-on from dsrc radio power-supplies.
- Link to v1: https://lore.kernel.org/r/20260408-imx8dxl-sr-som-v1-0-ce5a39acd713@solid-run.com
---
Josua Mayer (2):
dt-bindings: arm: fsl: Add SolidRun i.MX8DXL SoM and HummingBoard
arm64: dts: imx8dxl: Add SolidRun SoM and HummingBoard
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../freescale/imx8dxl-hummingboard-telematics.dts | 536 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8dxl-sr-som.dtsi | 458 ++++++++++++++++++
4 files changed, 1003 insertions(+)
---
base-commit: 254f49634ee16a731174d2ae34bc50bd5f45e731
change-id: 20260408-imx8dxl-sr-som-f141ec343173
Best regards,
--
Josua Mayer <josua@solid-run.com>
next reply other threads:[~2026-05-13 10:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-13 10:32 Josua Mayer [this message]
2026-05-13 10:32 ` [PATCH v5 1/2] dt-bindings: arm: fsl: Add SolidRun i.MX8DXL SoM and HummingBoard Josua Mayer
2026-05-13 10:32 ` [PATCH v5 2/2] arm64: dts: imx8dxl: Add SolidRun " Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260513-imx8dxl-sr-som-v5-0-d0899b371c38@solid-run.com \
--to=josua@solid-run.com \
--cc=Frank.Li@nxp.com \
--cc=ada@thorsis.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikhail.anikin@solid-run.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vladimir.oltean@nxp.com \
--cc=yazan.shhady@solid-run.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox