[PATCH v6 5/6] arm64: dts: qcom: sm8350: add Iris device

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

Add Iris and video clock controller devices, describing the Iris2 core
present on this platform.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 81 ++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c830953156ec..2148a140f162 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8350-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -19,6 +20,7 @@
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/reset/qcom,sm8350-videocc.h>
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
@@ -2747,6 +2749,85 @@ usb_2_dwc3: usb@a800000 {
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8350-iris", "qcom,sm8250-venus";
+			reg = <0x0 0x0aa00000 0x0 0x100000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+			power-domains = <&videocc MVS0C_GDSC>,
+					<&videocc MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MX>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mx",
+					     "mmcx";
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+			reset-names = "bus", "core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			operating-points-v2 = <&iris_opp_table>;
+			iommus = <&apps_smmu 0x2100 0x400>;
+			memory-region = <&pil_video_mem>;
+
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-338000000 {
+					opp-hz = /bits/ 64 <338000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,sm8350-videocc";
+			reg = <0 0x0abf0000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8350-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;

-- 
2.47.3