Devicetree
 help / color / mirror / Atom feed
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Linus Walleij <linusw@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Saravana Kannan <saravanak@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v3 08/17] ASoC: simple-amplifier: Remove DAPM widgets and routes from the ASoC component driver
Date: Wed, 13 May 2026 10:16:52 +0200	[thread overview]
Message-ID: <20260513081702.317117-9-herve.codina@bootlin.com> (raw)
In-Reply-To: <20260513081702.317117-1-herve.codina@bootlin.com>

The simple-amplifier set the DAPM wigets and routes table in the ASoC
component driver. This is perfectly fine when the component has well
known DAPM tables.

The simple-amplifier is going to handle several kind of components based
on the driver compatible string. The DAPM table will not be the same for
all components supported by the driver.

In order to have different DAPM table based on matching compatible
strings, move those tables from the ASoC component driver to the device
compatible string matching data.

Add those DAPM widgets and routes dynamically during the ASoC component
probe operation.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 sound/soc/codecs/simple-amplifier.c | 59 ++++++++++++++++++++++++++---
 1 file changed, 53 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/simple-amplifier.c b/sound/soc/codecs/simple-amplifier.c
index 231e84ab4c0e..3e644c1c2696 100644
--- a/sound/soc/codecs/simple-amplifier.c
+++ b/sound/soc/codecs/simple-amplifier.c
@@ -11,7 +11,15 @@
 #include <linux/regulator/consumer.h>
 #include <sound/soc.h>
 
+struct simple_amp_data {
+	const struct snd_soc_dapm_widget *dapm_widgets;
+	unsigned int num_dapm_widgets;
+	const struct snd_soc_dapm_route *dapm_routes;
+	unsigned int num_dapm_routes;
+};
+
 struct simple_amp {
+	const struct simple_amp_data *data;
 	struct gpio_desc *gpiod_enable;
 };
 
@@ -58,11 +66,39 @@ static const struct snd_soc_dapm_route simple_amp_dapm_routes[] = {
 	{ "OUTR", NULL, "DRV" },
 };
 
+static int simple_amp_add_basic_dapm(struct snd_soc_component *component)
+{
+	struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
+	struct simple_amp *simple_amp = snd_soc_component_get_drvdata(component);
+	struct device *dev = component->dev;
+	int ret;
+
+	/* Add basic dapm widgets and routes */
+	ret = snd_soc_dapm_new_controls(dapm, simple_amp->data->dapm_widgets,
+					simple_amp->data->num_dapm_widgets);
+	if (ret) {
+		dev_err(dev, "Failed to add basic dapm widgets (%d)\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(dapm, simple_amp->data->dapm_routes,
+				      simple_amp->data->num_dapm_routes);
+	if (ret) {
+		dev_err(dev, "Failed to add basic dapm routes (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int simple_amp_component_probe(struct snd_soc_component *component)
+{
+	/* Add basic dapm widgets and routes */
+	return simple_amp_add_basic_dapm(component);
+}
+
 static const struct snd_soc_component_driver simple_amp_component_driver = {
-	.dapm_widgets		= simple_amp_dapm_widgets,
-	.num_dapm_widgets	= ARRAY_SIZE(simple_amp_dapm_widgets),
-	.dapm_routes		= simple_amp_dapm_routes,
-	.num_dapm_routes	= ARRAY_SIZE(simple_amp_dapm_routes),
+	.probe = simple_amp_component_probe,
 };
 
 static int simple_amp_probe(struct platform_device *pdev)
@@ -75,6 +111,10 @@ static int simple_amp_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, simple_amp);
 
+	simple_amp->data = of_device_get_match_data(dev);
+	if (!simple_amp->data)
+		return -EINVAL;
+
 	simple_amp->gpiod_enable = devm_gpiod_get_optional(dev, "enable",
 							   GPIOD_OUT_LOW);
 	if (IS_ERR(simple_amp->gpiod_enable))
@@ -86,9 +126,16 @@ static int simple_amp_probe(struct platform_device *pdev)
 					       NULL, 0);
 }
 
+static const struct simple_amp_data simple_audio_amplifier_data = {
+	.dapm_widgets		= simple_amp_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(simple_amp_dapm_widgets),
+	.dapm_routes		= simple_amp_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(simple_amp_dapm_routes),
+};
+
 static const struct of_device_id simple_amp_ids[] = {
-	{ .compatible = "dioo,dio2125", },
-	{ .compatible = "simple-audio-amplifier", },
+	{ .compatible = "dioo,dio2125",		  .data = &simple_audio_amplifier_data},
+	{ .compatible = "simple-audio-amplifier", .data = &simple_audio_amplifier_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, simple_amp_ids);
-- 
2.54.0


  parent reply	other threads:[~2026-05-13  8:17 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-13  8:16 [PATCH v3 00/17] ASoC: Add support for GPIOs driven amplifiers Herve Codina
2026-05-13  8:16 ` [PATCH v3 01/17] of: Introduce of_property_read_s32_index() Herve Codina
2026-05-13  8:16 ` [PATCH v3 02/17] ASoC: dt-bindings: Add support for the GPIOs driven amplifier Herve Codina
2026-05-13  8:16 ` [PATCH v3 03/17] ASoC: simple-amplifier: Remove DRV_NAME defined value Herve Codina
2026-05-13  8:16 ` [PATCH v3 04/17] ASoC: simple-amplifier: Add missing headers Herve Codina
2026-05-13  8:16 ` [PATCH v3 05/17] ASoC: simple-amplifier: Remove CONFIG_OF flag and of_match_ptr() Herve Codina
2026-05-13  8:16 ` [PATCH v3 06/17] ASoC: simple-amplifier: Rename drv_event() function Herve Codina
2026-05-13  8:16 ` [PATCH v3 07/17] ASoC: simple-amplifier: Use 'simple_amp' variable name instead of 'priv' Herve Codina
2026-05-13  8:16 ` Herve Codina [this message]
2026-05-13  8:16 ` [PATCH v3 09/17] ASoC: simple-amplifier: Introduce support for gpio-audio-amp Herve Codina
2026-05-13  8:16 ` [PATCH v3 10/17] ASoC: simple-amplifier: gpio-audio-amp: Add support for extra power supplies Herve Codina
2026-05-13  8:16 ` [PATCH v3 11/17] ASoC: simple-amplifier: gpio-audio-amp: Add support for mute gpio Herve Codina
2026-05-13  8:16 ` [PATCH v3 12/17] ASoC: simple-amplifier: gpio-audio-amp: Add support for bypass gpio Herve Codina
2026-05-13  8:16 ` [PATCH v3 13/17] ASoC: simple-amplifier: gpio-audio-amp: Add support for basic gain Herve Codina
2026-05-13  8:16 ` [PATCH v3 14/17] ASoC: simple-amplifier: gpio-audio-amp: Add support for gain-ranges Herve Codina
2026-05-13  8:16 ` [PATCH v3 15/17] ASoC: simple-amplifier: gpio-audio-amp: Add support for gain-labels Herve Codina
2026-05-13  8:17 ` [PATCH v3 16/17] ASoC: simple-amplifier: Update author and copyright Herve Codina
2026-05-13  8:17 ` [PATCH v3 17/17] MAINTAINERS: Add the ASoC gpio audio amplifier entry Herve Codina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260513081702.317117-9-herve.codina@bootlin.com \
    --to=herve.codina@bootlin.com \
    --cc=brgl@kernel.org \
    --cc=broonie@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=robh@kernel.org \
    --cc=saravanak@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox