From: Prathamesh Shete <pshete@nvidia.com>
To: Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Prathamesh Shete <pshete@nvidia.com>,
<linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] dt-bindings: gpio: Add Tegra238 support
Date: Thu, 14 May 2026 12:48:34 +0000 [thread overview]
Message-ID: <20260514124835.108532-1-pshete@nvidia.com> (raw)
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
---
.../bindings/gpio/nvidia,tegra186-gpio.yaml | 6 ++
.../dt-bindings/gpio/nvidia,tegra238-gpio.h | 58 +++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 include/dt-bindings/gpio/nvidia,tegra238-gpio.h
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
index 17748dd1015d..adeb3b3a2902 100644
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -85,6 +85,8 @@ properties:
- nvidia,tegra194-gpio-aon
- nvidia,tegra234-gpio
- nvidia,tegra234-gpio-aon
+ - nvidia,tegra238-gpio
+ - nvidia,tegra238-gpio-aon
- nvidia,tegra256-gpio
- nvidia,tegra264-gpio
- nvidia,tegra264-gpio-uphy
@@ -163,6 +165,7 @@ allOf:
- nvidia,tegra186-gpio
- nvidia,tegra194-gpio
- nvidia,tegra234-gpio
+ - nvidia,tegra238-gpio
- nvidia,tegra256-gpio
- nvidia,tegra264-gpio
- nvidia,tegra264-gpio-uphy
@@ -180,6 +183,7 @@ allOf:
- nvidia,tegra186-gpio-aon
- nvidia,tegra194-gpio-aon
- nvidia,tegra234-gpio-aon
+ - nvidia,tegra238-gpio-aon
- nvidia,tegra264-gpio-aon
then:
properties:
@@ -192,6 +196,8 @@ allOf:
compatible:
contains:
enum:
+ - nvidia,tegra238-gpio
+ - nvidia,tegra238-gpio-aon
- nvidia,tegra264-gpio
- nvidia,tegra264-gpio-uphy
- nvidia,tegra264-gpio-aon
diff --git a/include/dt-bindings/gpio/nvidia,tegra238-gpio.h b/include/dt-bindings/gpio/nvidia,tegra238-gpio.h
new file mode 100644
index 000000000000..8a616a1df54c
--- /dev/null
+++ b/include/dt-bindings/gpio/nvidia,tegra238-gpio.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/* Copyright (c) 2026, NVIDIA CORPORATION. All rights reserved. */
+
+/*
+ * This header provides constants for binding nvidia,tegra238-gpio*.
+ *
+ * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_TEGRA238_GPIO_H
+#define _DT_BINDINGS_GPIO_TEGRA238_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* GPIOs implemented by main GPIO controller */
+#define TEGRA238_MAIN_GPIO_PORT_A 0
+#define TEGRA238_MAIN_GPIO_PORT_B 1
+#define TEGRA238_MAIN_GPIO_PORT_C 2
+#define TEGRA238_MAIN_GPIO_PORT_D 3
+#define TEGRA238_MAIN_GPIO_PORT_E 4
+#define TEGRA238_MAIN_GPIO_PORT_F 5
+#define TEGRA238_MAIN_GPIO_PORT_G 6
+#define TEGRA238_MAIN_GPIO_PORT_H 7
+#define TEGRA238_MAIN_GPIO_PORT_J 8
+#define TEGRA238_MAIN_GPIO_PORT_K 9
+#define TEGRA238_MAIN_GPIO_PORT_L 10
+#define TEGRA238_MAIN_GPIO_PORT_M 11
+#define TEGRA238_MAIN_GPIO_PORT_N 12
+#define TEGRA238_MAIN_GPIO_PORT_P 13
+#define TEGRA238_MAIN_GPIO_PORT_Q 14
+#define TEGRA238_MAIN_GPIO_PORT_R 15
+#define TEGRA238_MAIN_GPIO_PORT_S 16
+#define TEGRA238_MAIN_GPIO_PORT_T 17
+#define TEGRA238_MAIN_GPIO_PORT_U 18
+#define TEGRA238_MAIN_GPIO_PORT_V 19
+#define TEGRA238_MAIN_GPIO_PORT_W 20
+#define TEGRA238_MAIN_GPIO_PORT_X 21
+
+#define TEGRA238_MAIN_GPIO(port, offset) \
+ ((TEGRA238_MAIN_GPIO_PORT_##port * 8) + (offset))
+
+/* GPIOs implemented by AON GPIO controller */
+#define TEGRA238_AON_GPIO_PORT_AA 0
+#define TEGRA238_AON_GPIO_PORT_BB 1
+#define TEGRA238_AON_GPIO_PORT_CC 2
+#define TEGRA238_AON_GPIO_PORT_DD 3
+#define TEGRA238_AON_GPIO_PORT_EE 4
+#define TEGRA238_AON_GPIO_PORT_FF 5
+#define TEGRA238_AON_GPIO_PORT_GG 6
+#define TEGRA238_AON_GPIO_PORT_HH 7
+
+#define TEGRA238_AON_GPIO(port, offset) \
+ ((TEGRA238_AON_GPIO_PORT_##port * 8) + (offset))
+
+#endif
--
2.25.1
next reply other threads:[~2026-05-14 12:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-14 12:48 Prathamesh Shete [this message]
2026-05-14 12:48 ` [PATCH 2/2] gpio: tegra186: Add support for Tegra238 Prathamesh Shete
2026-05-14 18:11 ` [PATCH 1/2] dt-bindings: gpio: Add Tegra238 support Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260514124835.108532-1-pshete@nvidia.com \
--to=pshete@nvidia.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox