[PATCH v2 3/7] iio: temperature: ltc2983: Fix inconsistent channel wording in messages

[Liviu Stan <liviu.stan@analog.com>]

Replace all occurrences of the abbreviated 'chann' and 'chan' with
'channel' in error and debug messages throughout the driver.

Fixes: f110f3188e5639c81c457b2b831d40dfe3891bdb ("iio: temperature: Add support for LTC2983")
Fixes: a00838cae079b9b9b90969c2b7b031b1bfd9ab3a ("iio: temperature: ltc2983: convert to dev_err_probe()")
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
---
Changes in v2:
- New patch.

 drivers/iio/temperature/ltc2983.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index e74ea4f87ec9..f42777c1f3c2 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -700,7 +700,7 @@ ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data
 	if (!(thermo->sensor_config & LTC2983_THERMOCOUPLE_DIFF_MASK) &&
 	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
 		return dev_err_ptr_probe(dev, -EINVAL,
-					 "Invalid chann:%d for differential thermocouple\n",
+					 "Invalid channel %d for differential thermocouple\n",
 					 sensor->chan);
 
 	struct fwnode_handle *ref __free(fwnode_handle) =
@@ -798,7 +798,7 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 	/*
 	 * rtd channel indexes are a bit more complicated to validate.
 	 * For 4wire RTD with rotation, the channel selection cannot be
-	 * >=19 since the chann + 1 is used in this configuration.
+	 * >=19 since the channel + 1 is used in this configuration.
 	 * For 4wire RTDs with kelvin rsense, the rsense channel cannot be
 	 * <=1 since channel - 1 and channel - 2 are used.
 	 */
@@ -815,18 +815,18 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
 		    (rtd->r_sense_chan <=  min))
 			/* kelvin rsense*/
 			return dev_err_ptr_probe(dev, -EINVAL,
-						 "Invalid rsense chann:%d to use in kelvin rsense\n",
+						 "Invalid channel %d for kelvin rsense\n",
 						 rtd->r_sense_chan);
 
 		if (sensor->chan < min || sensor->chan > max)
 			return dev_err_ptr_probe(dev, -EINVAL,
-						 "Invalid chann:%d for the rtd config\n",
+						 "Invalid channel %d for RTD config\n",
 						 sensor->chan);
 	} else {
 		/* same as differential case */
 		if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
 			return dev_err_ptr_probe(dev, -EINVAL,
-						 "Invalid chann:%d for RTD\n",
+						 "Invalid channel %d for RTD\n",
 						 sensor->chan);
 	}
 
@@ -925,7 +925,7 @@ ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
 	if (!(thermistor->sensor_config & LTC2983_THERMISTOR_DIFF_MASK) &&
 	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
 		return dev_err_ptr_probe(dev, -EINVAL,
-					 "Invalid chann:%d for differential thermistor\n",
+					 "Invalid channel %d for differential thermistor\n",
 					 sensor->chan);
 
 	/* check custom sensor */
@@ -1040,7 +1040,7 @@ ltc2983_diode_new(const struct fwnode_handle *child, const struct ltc2983_data *
 	if (!(diode->sensor_config & LTC2983_DIODE_DIFF_MASK) &&
 	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
 		return dev_err_ptr_probe(dev, -EINVAL,
-					 "Invalid chann:%d for differential thermistor\n",
+					 "Invalid channel %d for differential thermistor\n",
 					 sensor->chan);
 
 	/* set common parameters */
@@ -1094,7 +1094,7 @@ static struct ltc2983_sensor *ltc2983_r_sense_new(struct fwnode_handle *child,
 	/* validate channel index */
 	if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
 		return dev_err_ptr_probe(dev, -EINVAL,
-					 "Invalid chann:%d for r_sense\n",
+					 "Invalid channel %d for r_sense\n",
 					 sensor->chan);
 
 	ret = fwnode_property_read_u32(child, "adi,rsense-val-milli-ohms", &temp);
@@ -1131,7 +1131,7 @@ static struct ltc2983_sensor *ltc2983_adc_new(struct fwnode_handle *child,
 
 	if (!adc->single_ended && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
 		return dev_err_ptr_probe(dev, -EINVAL,
-					 "Invalid chan:%d for differential adc\n",
+					 "Invalid channel %d for differential ADC\n",
 					 sensor->chan);
 
 	/* set common parameters */
@@ -1157,7 +1157,7 @@ static struct ltc2983_sensor *ltc2983_temp_new(struct fwnode_handle *child,
 
 	if (!temp->single_ended && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
 		return dev_err_ptr_probe(dev, -EINVAL,
-					 "Invalid chan:%d for differential temp\n",
+					 "Invalid channel %d for differential temp\n",
 					 sensor->chan);
 
 	temp->custom = __ltc2983_custom_sensor_new(st, child, "adi,custom-temp",
@@ -1182,7 +1182,7 @@ static int ltc2983_chan_read(struct ltc2983_data *st,
 
 	start_conversion = LTC2983_STATUS_START(true);
 	start_conversion |= LTC2983_STATUS_CHAN_SEL(sensor->chan);
-	dev_dbg(dev, "Start conversion on chan:%d, status:%02X\n",
+	dev_dbg(dev, "Start conversion on channel:%d, status:%02X\n",
 		sensor->chan, start_conversion);
 	/* start conversion */
 	ret = regmap_write(st->regmap, LTC2983_STATUS_REG, start_conversion);
@@ -1234,7 +1234,7 @@ static int ltc2983_read_raw(struct iio_dev *indio_dev,
 
 	/* sanity check */
 	if (chan->address >= st->num_channels) {
-		dev_err(dev, "Invalid chan address:%ld",
+		dev_err(dev, "Invalid channel address: %ld\n",
 			chan->address);
 		return -EINVAL;
 	}
-- 
2.43.0