From: Kaustabh Chakraborty <kauschluss@disroot.org>
To: "Lee Jones" <lee@kernel.org>, "Pavel Machek" <pavel@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"MyungJoo Ham" <myungjoo.ham@samsung.com>,
"Chanwoo Choi" <cw00.choi@samsung.com>,
"Sebastian Reichel" <sre@kernel.org>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"André Draszik" <andre.draszik@linaro.org>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>,
"Nam Tran" <trannamatk@gmail.com>,
"Łukasz Lebiedziński" <kernel@lvkasz.us>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-rtc@vger.kernel.org,
linux-doc@vger.kernel.org,
Kaustabh Chakraborty <kauschluss@disroot.org>
Subject: [PATCH v6 03/11] dt-bindings: mfd: add documentation for S2MU005 PMIC
Date: Fri, 15 May 2026 16:08:59 +0530 [thread overview]
Message-ID: <20260515-s2mu005-pmic-v6-3-1979106992d4@disroot.org> (raw)
In-Reply-To: <20260515-s2mu005-pmic-v6-0-1979106992d4@disroot.org>
Samsung's S2MU005 PMIC includes subdevices for a charger, an MUIC (Micro
USB Interface Controller), and flash and RGB LED controllers.
Add the compatible and documentation for the S2MU005 PMIC. Also, add an
example for nodes for supported sub-devices, i.e. MUIC, flash LEDs, and
RGB LEDs. Charger sub-device uses the node of the parent.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
.../bindings/mfd/samsung,s2mu005-pmic.yaml | 120 +++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mu005-pmic.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mu005-pmic.yaml
new file mode 100644
index 0000000000000..0e6afb7d2017b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mu005-pmic.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mu005-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MU005 Power Management IC
+
+maintainers:
+ - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+description: |
+ The S2MU005 is a companion power management IC which includes subdevices for
+ a charger controller, an MUIC (Micro USB Interface Controller), and flash and
+ RGB LED controllers.
+
+allOf:
+ - $ref: /schemas/power/supply/power-supply.yaml#
+
+properties:
+ compatible:
+ const: samsung,s2mu005-pmic
+
+ flash:
+ $ref: /schemas/leds/samsung,s2mu005-flash.yaml
+ description:
+ Child node describing flash LEDs.
+
+ interrupts:
+ maxItems: 1
+
+ muic:
+ $ref: /schemas/extcon/samsung,s2mu005-muic.yaml#
+ description:
+ Child node describing MUIC device.
+
+ multi-led:
+ type: object
+
+ allOf:
+ - $ref: /schemas/leds/leds-class-multicolor.yaml#
+
+ properties:
+ compatible:
+ const: samsung,s2mu005-rgb
+
+ required:
+ - compatible
+
+ unevaluatedProperties: false
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@3d {
+ compatible = "samsung,s2mu005-pmic";
+ reg = <0x3d>;
+ interrupt-parent = <&gpa2>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ monitored-battery = <&battery>;
+
+ flash {
+ compatible = "samsung,s2mu005-flash";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_FLASH;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_FLASH;
+ function-enumerator = <1>;
+ };
+ };
+
+ muic {
+ compatible = "samsung,s2mu005-muic";
+
+ connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
+
+ port {
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ };
+
+ multi-led {
+ compatible = "samsung,s2mu005-rgb";
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ linux,default-trigger = "pattern";
+ };
+ };
+ };
--
2.53.0
next prev parent reply other threads:[~2026-05-15 10:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-15 10:38 [PATCH v6 00/11] Support for Samsung S2MU005 PMIC and its sub-devices Kaustabh Chakraborty
2026-05-15 10:38 ` [PATCH v6 01/11] dt-bindings: leds: document Samsung S2M series PMIC flash LED device Kaustabh Chakraborty
2026-05-15 10:38 ` [PATCH v6 02/11] dt-bindings: extcon: document Samsung S2M series PMIC extcon device Kaustabh Chakraborty
2026-05-15 11:05 ` sashiko-bot
2026-05-15 10:38 ` Kaustabh Chakraborty [this message]
2026-05-15 10:52 ` [PATCH v6 03/11] dt-bindings: mfd: add documentation for S2MU005 PMIC sashiko-bot
2026-05-15 10:39 ` [PATCH v6 04/11] mfd: sec: add support " Kaustabh Chakraborty
2026-05-15 11:16 ` sashiko-bot
2026-05-15 10:39 ` [PATCH v6 05/11] mfd: sec: set DMA coherent mask Kaustabh Chakraborty
2026-05-15 11:10 ` sashiko-bot
2026-05-15 10:39 ` [PATCH v6 06/11] mfd: sec: resolve PMIC revision in S2MU005 Kaustabh Chakraborty
2026-05-15 10:39 ` [PATCH v6 07/11] leds: flash: add support for Samsung S2M series PMIC flash LED device Kaustabh Chakraborty
2026-05-15 11:05 ` sashiko-bot
2026-05-15 10:39 ` [PATCH v6 08/11] leds: rgb: add support for Samsung S2M series PMIC RGB " Kaustabh Chakraborty
2026-05-15 11:13 ` sashiko-bot
2026-05-15 10:39 ` [PATCH v6 09/11] Documentation: leds: document pattern behavior of Samsung S2M series PMIC RGB LEDs Kaustabh Chakraborty
2026-05-15 11:03 ` sashiko-bot
2026-05-15 10:39 ` [PATCH v6 10/11] extcon: add support for Samsung S2M series PMIC extcon devices Kaustabh Chakraborty
2026-05-15 11:17 ` sashiko-bot
2026-05-15 10:39 ` [PATCH v6 11/11] power: supply: add support for Samsung S2M series PMIC charger device Kaustabh Chakraborty
2026-05-15 11:20 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260515-s2mu005-pmic-v6-3-1979106992d4@disroot.org \
--to=kauschluss@disroot.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andre.draszik@linaro.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@lvkasz.us \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=sre@kernel.org \
--cc=trannamatk@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox