[PATCH v7 2/6] dt-bindings: clock: airoha: Add PHY binding for Serdes port

[Christian Marangi <ansuelsmth@gmail.com>]

Add PHY cell property for Serdes port selection. Currently supported only
for Airoha AN7581 SoC, that support up to 4 Serdes port.

The Serdes port can support both PCIe, USB3 or Ethernet mode.

The available Serdes port can be selected following the dt-binding header
in [2].

[2] <include/dt-bindings/soc/airoha,scu-ssr.h>

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/clock/airoha,en7523-scu.yaml     | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
index eb24a5687639..913ddc16182b 100644
--- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -23,6 +23,7 @@ description: |
 
   All these identifiers can be found in:
   [1]: <include/dt-bindings/clock/en7523-clk.h>.
+  [2]: <include/dt-bindings/soc/airoha,scu-ssr.h>.
 
   The clocks are provided inside a system controller node.
 
@@ -50,6 +51,12 @@ properties:
     description: ID of the controller reset line
     const: 1
 
+  '#phy-cells':
+    description:
+      The first cell indicates the serdes phy number, see [2] for the
+      available serdes port.
+    const: 1
+
 required:
   - compatible
   - reg
@@ -65,6 +72,8 @@ allOf:
         reg:
           minItems: 2
 
+        '#phy-cells': false
+
   - if:
       properties:
         compatible:
-- 
2.53.0