Re: [PATCH 0/6] arm64: qcom: Enable additional hardware on Radxa Dragon Q6A

[Graham O'Connor <graham.oconnor@gmail.com>]

Thank you to Konrad, Neil, and others for the very prompt and helpful reviews.

Based on the feedback received, I think it best to withdraw this series to
address the issues raised, most notobly:

1. The DP_TRAIN_LEVEL_MAX change (patch 3) is too broad - it affects all
   devices using the Qualcomm MSM DP driver rather than being specific to
   the RA620 bridge. A proper fix should be implemented at the bridge
   level. This is going to take more investigation.

2. The display DT nodes (patch 5) should use the radxa,ra620 compatible
   string per the existing Radxa upstream series from Xilin Wu, and the
   lane ordering needs correcting.

3. The rpmh-rsc early return (patch 1) needs further review regarding
   the implications of returning before full driver initialization.

4. DTS patch label dependency issue (sorry) 

I'll integrate with the Radxa upstream effort, re-evaluate the other areas
and resubmit corrected patches addressing these concerns at a later date.

Thanks for the feedback.

Cheers

Graham