From: Jun Yan <jerrysteve1101@gmail.com>
To: lee@kernel.org
Cc: conor+dt@kernel.org, daniel@zonque.org,
devicetree@vger.kernel.org, jerrysteve1101@gmail.com,
krzk+dt@kernel.org, linux-kernel@vger.kernel.org,
linux-leds@vger.kernel.org, luccafachinetti@gmail.com,
pzalewski@thegoodpenguin.co.uk, robh@kernel.org
Subject: Re: [PATCH v5 4/5] leds: is31fl32xx: Add powerdown pin to exit hardware shutdown mode
Date: Sun, 24 May 2026 23:28:46 +0800 [thread overview]
Message-ID: <20260524152846.381844-1-jerrysteve1101@gmail.com> (raw)
In-Reply-To: <20260520141259.GD2767592@google.com>
> On Fri, 08 May 2026, Jun Yan wrote:
>
> > The IS31FL32XX series features an SDB shutdown pin.
> > Driving it low (active low) places the chip into hardware shutdown
> > mode for power saving, while all register contents are preserved
> > and registers are not reset.
> >
> > Drive the pin logic low during probe() to exit hardware shutdown
> > mode.
> >
> > Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
> > ---
> > drivers/leds/leds-is31fl32xx.c | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git "a/drivers/leds/leds-is31fl32xx.c" "b/drivers/leds/leds-is31fl32xx.c"
> > index fe07acbb103a..57d779e07a62 100644
> > --- "a/drivers/leds/leds-is31fl32xx.c"
> > +++ "b/drivers/leds/leds-is31fl32xx.c"
> > @@ -10,6 +10,7 @@
> > */
> >
> > #include <linux/device.h>
> > +#include <linux/gpio.h>
>
> <linux/gpio/consumer.h>?
Got it.
>
> > #include <linux/i2c.h>
> > #include <linux/kernel.h>
> > #include <linux/leds.h>
> > @@ -60,6 +61,7 @@ struct is31fl32xx_led_data {
> > struct is31fl32xx_priv {
> > const struct is31fl32xx_chipdef *cdef;
> > struct i2c_client *client;
> > + struct gpio_desc *powerdown_gpio;
> > unsigned int num_leds;
> > struct is31fl32xx_led_data leds[];
> > };
> > @@ -421,6 +423,11 @@ static int is31fl32xx_parse_dt(struct device *dev,
> > const struct is31fl32xx_chipdef *cdef = priv->cdef;
> > int ret = 0;
> >
> > + priv->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_LOW);
> > + if (IS_ERR(priv->powerdown_gpio))
> > + return dev_err_probe(dev, PTR_ERR(priv->powerdown_gpio),
> > + "Failed to get powerdown gpio\n");
> > +
>
> "Failed to get 'powerdown' GPIO".
>
> Shows that powerdown is the name of the pin and correctly capitalises
> GPIO.
Okay, I'll fix this.
>
> > if ((cdef->output_frequency_setting_reg != IS31FL32XX_REG_NONE) &&
> > of_property_read_bool(dev_of_node(dev), "issi,22khz-pwm")) {
> >
> > --
> > 2.53.0
> >
> >
>
> --
> Lee Jones
next prev parent reply other threads:[~2026-05-24 15:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 13:11 [PATCH v5 0/5] leds: Add powerdown gpio for is31fl32xx Jun Yan
2026-05-08 13:11 ` [PATCH v5 1/5] dt-bindings: leds: is31fl32xx: convert the binding to yaml Jun Yan
2026-05-08 20:49 ` sashiko-bot
2026-05-08 13:11 ` [PATCH v5 2/5] dt-bindings: leds: leds-is31fl32xx: add support for is31fl3236a Jun Yan
2026-05-08 13:11 ` [PATCH v5 3/5] dt-bindings: leds: leds-is31fl32xx: Add powerdown-gpios property Jun Yan
2026-05-08 13:11 ` [PATCH v5 4/5] leds: is31fl32xx: Add powerdown pin to exit hardware shutdown mode Jun Yan
2026-05-08 21:15 ` sashiko-bot
2026-05-20 14:12 ` Lee Jones
2026-05-24 15:28 ` Jun Yan [this message]
2026-05-08 13:11 ` [PATCH v5 5/5] leds: is31f132xx: Fix missing brightness_steps for is31f13236 Jun Yan
2026-05-08 21:28 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260524152846.381844-1-jerrysteve1101@gmail.com \
--to=jerrysteve1101@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=luccafachinetti@gmail.com \
--cc=pzalewski@thegoodpenguin.co.uk \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox