From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from inva021.nxp.com (inva021.nxp.com [92.121.34.21]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3A5563A7F52; Mon, 25 May 2026 06:42:29 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=92.121.34.21 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779691359; cv=none; b=gWGJVrBza8op5MryCOpfxcd4f4KNtAGkrGDuUrbhUQPycx+YqOyBekTYXIQZ6Ck+ZY25Cr9/3LCThx1snkK22AHcHANIYoJ/8WxFvq/c/kBwYkQzcwUOCMp+zp9ZAEWrSQScPk+yJnf2i/oADaPLjZs/sjD6D/PlTF42ea1v9n8= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779691359; c=relaxed/simple; bh=XluhdMi7wVaacZZhT+fi8/fqPvTyO1k+Mm7TT0HFshA=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=QsuIxVp1yGLFwVTWxRUK+Jgwz150l73rg8+YyabZ7qM6OR4Fh+vuJXPp8tIP8b49QwKnTFy/ECd8m3maDlZnWn4U32wi4dH8CKJPUsboFg5wj5XyEbvsR0OQsDHnXyKYl4zDhRp6gulzeLK+DYRFnlyPk0xg6+Iqh1b8BhWPw18= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com; spf=pass smtp.mailfrom=nxp.com; arc=none smtp.client-ip=92.121.34.21 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=nxp.com Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id BD5E7202D60; Mon, 25 May 2026 08:42:27 +0200 (CEST) Received: from aprdc01srsp001v.ap-rdc01.nxp.com (aprdc01srsp001v.ap-rdc01.nxp.com [165.114.16.16]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 867AB202ADD; Mon, 25 May 2026 08:42:27 +0200 (CEST) Received: from lsv03900.swis.in-blr01.nxp.com (lsv03900.swis.in-blr01.nxp.com [10.12.177.15]) by aprdc01srsp001v.ap-rdc01.nxp.com (Postfix) with ESMTP id 3B6721800086; Mon, 25 May 2026 14:42:26 +0800 (+08) From: Lakshay Piplani To: linux-kernel@vger.kernel.org, linux-i3c@lists.infradead.org, alexandre.belloni@bootlin.com, krzk+dt@kernel.org, robh@kernel.org, conor+dt@kernel.org, devicetree@vger.kernel.org, broonie@kernel.org, lee@kernel.org, Frank.Li@nxp.com, lgirdwood@gmail.com Cc: vikash.bansal@nxp.com, priyanka.jain@nxp.com, aman.kumarpandey@nxp.com, Lakshay Piplani Subject: [PATCH v10 5/9] mfd: p3h2x4x: Add driver for NXP P3H2x4x i3c hub and on-die regulator Date: Mon, 25 May 2026 12:12:05 +0530 Message-Id: <20260525064209.2263045-6-lakshay.piplani@nxp.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20260525064209.2263045-1-lakshay.piplani@nxp.com> References: <20260525064209.2263045-1-lakshay.piplani@nxp.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Virus-Scanned: ClamAV using ClamSMTP From: Aman Kumar Pandey Add core MFD support for the NXP P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841) family of multiport I3C hub devices. These devices connect to a host via I3C/I2C/SMBus and expose multiple downstream target ports. Signed-off-by: Aman Kumar Pandey Signed-off-by: Vikash Bansal Signed-off-by: Lakshay Piplani --- Changes in v10: - Drop redundant is_p3h2x4x_in_i3c flag Changes in v9: - Renamed macros to follow consistent uppercase naming conventions - Made REGMAP selects in the P3H2X4X MFD Kconfig conditional, to avoid I3C/I2C dependency issues Changes in v8: - No change Changes in v7: - Use new config I3C_OR_I2C Changes in v6: - No change Changes in v5: - Corrected the ordering in the Makefile and Kconfig for MFD_P3H2X4X - Updated dev_err_probe() for regmap_init failure. - Updated module description Changes in v4: - Split the driver into three separate patches(mfd, regulator and I3C hub) - Added support for NXP P3H2x4x MFD functionality --- --- MAINTAINERS | 2 + drivers/mfd/Kconfig | 13 ++++ drivers/mfd/Makefile | 1 + drivers/mfd/p3h2840.c | 122 ++++++++++++++++++++++++++++++++++++ include/linux/i3c/device.h | 1 + include/linux/mfd/p3h2840.h | 26 ++++++++ 6 files changed, 165 insertions(+) create mode 100644 drivers/mfd/p3h2840.c create mode 100644 include/linux/mfd/p3h2840.h diff --git a/MAINTAINERS b/MAINTAINERS index 8ae231f67460..25e578dd74dd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19311,6 +19311,8 @@ L: linux-kernel@vger.kernel.org L: linux-i3c-owner@lists.infradead.org S: Maintained F: Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml +F: drivers/mfd/p3h2840.c +F: include/linux/mfd/p3h2840.h NXP PF5300/PF5301/PF5302 PMIC REGULATOR DEVICE DRIVER M: Woodrow Douglass diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 7192c9d1d268..405b50c3c77b 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -617,6 +617,19 @@ config MFD_MX25_TSADC i.MX25 processors. They consist of a conversion queue for general purpose ADC and a queue for Touchscreens. +config MFD_P3H2X4X + tristate "NXP P3H2X4X I3C Hub Device" + depends on I3C_OR_I2C + select MFD_CORE + select REGMAP_I3C if I3C + select REGMAP_I2C if I2C + help + Enable Support for NXP P3H244x/P3H284x I3C HUB device using I3C/I2C + communication interface. + + This driver provides support for I3C hub and regulator, each subdriver + can be enabled independently depending on the required functionality. + config MFD_PF1550 tristate "NXP PF1550 PMIC Support" depends on I2C=y && OF diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index e75e8045c28a..a284b22c7b13 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o obj-$(CONFIG_MFD_MC13XXX_SPI) += mc13xxx-spi.o obj-$(CONFIG_MFD_MC13XXX_I2C) += mc13xxx-i2c.o +obj-$(CONFIG_MFD_P3H2X4X) += p3h2840.o obj-$(CONFIG_MFD_PF1550) += pf1550.o obj-$(CONFIG_MFD_NCT6694) += nct6694.o diff --git a/drivers/mfd/p3h2840.c b/drivers/mfd/p3h2840.c new file mode 100644 index 000000000000..9bd8cf6980f1 --- /dev/null +++ b/drivers/mfd/p3h2840.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2025-2026 NXP + * P3H2X4X i3c hub and regulator device. + */ + +#include +#include +#include +#include +#include + +static const struct mfd_cell p3h2x4x_devs[] = { + { + .name = "p3h2x4x-regulator", + }, + { + .name = "p3h2x4x-i3c-hub", + }, +}; + +static const struct regmap_config p3h2x4x_regmap_config = { + .reg_bits = P3H2X4X_REG_BITS, + .val_bits = P3H2X4X_VAL_BITS, + .max_register = 0xFF, +}; + +static int p3h2x4x_device_probe_i3c(struct i3c_device *i3cdev) +{ + struct p3h2x4x_dev *p3h2x4x; + int ret; + + p3h2x4x = devm_kzalloc(&i3cdev->dev, sizeof(*p3h2x4x), GFP_KERNEL); + if (!p3h2x4x) + return -ENOMEM; + + i3cdev_set_drvdata(i3cdev, p3h2x4x); + + p3h2x4x->regmap = devm_regmap_init_i3c(i3cdev, &p3h2x4x_regmap_config); + if (IS_ERR(p3h2x4x->regmap)) + return dev_err_probe(&i3cdev->dev, PTR_ERR(p3h2x4x->regmap), + "Failed to register HUB regmap\n"); + p3h2x4x->i3cdev = i3cdev; + + ret = devm_mfd_add_devices(&i3cdev->dev, PLATFORM_DEVID_AUTO, + p3h2x4x_devs, ARRAY_SIZE(p3h2x4x_devs), + NULL, 0, NULL); + if (ret) + return dev_err_probe(&i3cdev->dev, ret, "Failed to add sub devices\n"); + + return 0; +} + +static int p3h2x4x_device_probe_i2c(struct i2c_client *client) +{ + struct p3h2x4x_dev *p3h2x4x; + int ret; + + p3h2x4x = devm_kzalloc(&client->dev, sizeof(*p3h2x4x), GFP_KERNEL); + if (!p3h2x4x) + return -ENOMEM; + + i2c_set_clientdata(client, p3h2x4x); + + p3h2x4x->regmap = devm_regmap_init_i2c(client, &p3h2x4x_regmap_config); + if (IS_ERR(p3h2x4x->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(p3h2x4x->regmap), + "Failed to register HUB regmap\n"); + + p3h2x4x->i3cdev = NULL; + + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, + p3h2x4x_devs, ARRAY_SIZE(p3h2x4x_devs), + NULL, 0, NULL); + if (ret) + return dev_err_probe(&client->dev, ret, "Failed to add sub devices\n"); + + return 0; +} + +static const struct i3c_device_id p3h2x4x_i3c_ids[] = { + I3C_CLASS(I3C_DCR_HUB, NULL), + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(i3c, p3h2x4x_i3c_ids); + +static const struct i2c_device_id p3h2x4x_i2c_id_table[] = { + { "nxp-i3c-hub" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, p3h2x4x_i2c_id_table); + +static const struct of_device_id p3h2x4x_i2c_of_match[] = { + { .compatible = "nxp,p3h2840", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, p3h2x4x_i2c_of_match); + +static struct i3c_driver p3h2x4x_i3c = { + .driver = { + .name = "p3h2x4x_i3c_drv", + }, + .probe = p3h2x4x_device_probe_i3c, + .id_table = p3h2x4x_i3c_ids, +}; + +static struct i2c_driver p3h2x4x_i2c = { + .driver = { + .name = "p3h2x4x_i2c_drv", + .of_match_table = p3h2x4x_i2c_of_match, + }, + .probe = p3h2x4x_device_probe_i2c, + .id_table = p3h2x4x_i2c_id_table, +}; + +module_i3c_i2c_driver(p3h2x4x_i3c, &p3h2x4x_i2c); + +MODULE_AUTHOR("Aman Kumar Pandey "); +MODULE_AUTHOR("Vikash Bansal "); +MODULE_AUTHOR("Lakshay Piplani "); +MODULE_DESCRIPTION("NXP P3H2X4X I3C HUB multi function driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h index 971d53349b6f..6188082599dd 100644 --- a/include/linux/i3c/device.h +++ b/include/linux/i3c/device.h @@ -85,6 +85,7 @@ struct i3c_xfer { */ enum i3c_dcr { I3C_DCR_GENERIC_DEVICE = 0, + I3C_DCR_HUB = 194, }; #define I3C_PID_MANUF_ID(pid) (((pid) & GENMASK_ULL(47, 33)) >> 33) diff --git a/include/linux/mfd/p3h2840.h b/include/linux/mfd/p3h2840.h new file mode 100644 index 000000000000..18ff15f9e2d9 --- /dev/null +++ b/include/linux/mfd/p3h2840.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2025-2026 NXP + * This header file contain private Reg address and its bit mapping etc. + */ + +#ifndef _LINUX_MFD_P3H2840_H +#define _LINUX_MFD_P3H2840_H + +#include + +/* Device Configuration Registers */ +#define P3H2X4X_DEV_REG_PROTECTION_CODE 0x10 +#define P3H2X4X_REGISTERS_LOCK_CODE 0x00 +#define P3H2X4X_REGISTERS_UNLOCK_CODE 0x69 +#define P3H2X4X_CP1_REGISTERS_UNLOCK_CODE 0x6a + +/* Reg config for Regmap */ +#define P3H2X4X_REG_BITS 8 +#define P3H2X4X_VAL_BITS 8 + +struct p3h2x4x_dev { + struct i3c_device *i3cdev; + struct regmap *regmap; +}; +#endif /* _LINUX_MFD_P3H2840_H */ -- 2.25.1