From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 317A838228F; Mon, 25 May 2026 16:41:58 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.135.77 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779727320; cv=none; b=pJzkoWYeyJ3/Ht9m2cSesk1b/ouIU4AIu5SFrGtTS0U6U9dqVzRoj/bTPCqWIHk54ffOOzV4CEqDKauICPFNo+YYM2DclMP4764wiDvS1+pDXTAbOWXeYcjxcdsj7GGrjFNTF7veScUlephZS5RPIdt6ulr3zXyZFcX5M0FUYPI= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779727320; c=relaxed/simple; bh=SD+0oYnm52k4t0AIvhHHP8/nJEZ5ILKaYlXDfBjuquw=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=YEaOtWoQ9Dp/HX7w0nPnVpZeiWxEb/Ivolyn1dSp8f4Q4s4PTMqdX8N+pF+e8Zaxb7gDXllSF7RSqgYm/QQA4w+OksLg6riuhzvd2nlinv2SF3rk79W3RgIeEHe2OU9FbIVR3pWNb/W7szQLHTx0J4DYC8q27FLifTmIXYsrI+4= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=analog.com; spf=pass smtp.mailfrom=analog.com; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b=u6Rr/p3P; arc=none smtp.client-ip=148.163.135.77 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=analog.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=analog.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b="u6Rr/p3P" Received: from pps.filterd (m0167089.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.18.1.11/8.18.1.11) with ESMTP id 64PEKAs93930346; Mon, 25 May 2026 12:41:56 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.com; h= content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=DKIM; bh=/3oSR MauE6ODmk+4ojttATSGNRuNeC+hV9G9mX9NMZE=; b=u6Rr/p3PAM8iNaJnpLYCc 5n7hbp9Tw7sN72xpPps/p4Tq0t5oi3SBBIp8/XOJSaHxNO+ecgs97Jr/srdwLlK7 a9t3OI9P+dWbpYZ8AHK0kdY0GlpG0a+vUd8BrUBQMQ4ZgiFsl5nRDotPXyA4K4c5 vEXkNCbyc3B7YmjNTFFwp2UTykzkEkL/M4u9Pl7/DMeykaJqw5pCzc2pS9QxfTfj PQCpmPBglrYKZYQLs9ckqBGk+tABx+XmkrYzdbJHrGXK/VisyBijrCSiTlI3BDmW fvdKBYvSvj9bYBuAG+9TW44QRNiTTiIQHNe47C5m8bklPm7fSF147vrPl8kBq1ho Q== Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 4eb950f9h5-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 25 May 2026 12:41:56 -0400 (EDT) Received: from ASHBMBX9.ad.analog.com (ASHBMBX9.ad.analog.com [10.64.17.10]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 64PGftlJ022316 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 25 May 2026 12:41:55 -0400 Received: from ASHBCASHYB4.ad.analog.com (10.64.17.132) by ASHBMBX9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1748.37; Mon, 25 May 2026 12:41:55 -0400 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBCASHYB4.ad.analog.com (10.64.17.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1748.37; Mon, 25 May 2026 12:41:54 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.1748.37 via Frontend Transport; Mon, 25 May 2026 12:41:54 -0400 Received: from HYB-MkYHBcJRSnh.ad.analog.com ([10.32.226.85]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 64PGevH7028845; Mon, 25 May 2026 12:41:47 -0400 From: Liviu Stan To: Jonathan Cameron , David Lechner , =?UTF-8?q?Nuno=20S=C3=A1?= , Andy Shevchenko , Michael Hennerich , Rob Herring , "Krzysztof Kozlowski" , Conor Dooley , "Antoniu Miclaus" , Liviu Stan , Francesco Lavra , , , , Subject: [PATCH v4 8/9] dt-bindings: iio: temperature: Add ADT7604 support to adi,ltc2983 Date: Mon, 25 May 2026 19:39:35 +0300 Message-ID: <20260525164013.118614-9-liviu.stan@analog.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20260525164013.118614-1-liviu.stan@analog.com> References: <20260525164013.118614-1-liviu.stan@analog.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-ORIG-GUID: fkdaG9Zgl7KEY7QjaeHGoDtx0w6a-Tep X-Proofpoint-GUID: fkdaG9Zgl7KEY7QjaeHGoDtx0w6a-Tep X-Authority-Analysis: v=2.4 cv=TOh1jVla c=1 sm=1 tr=0 ts=6a147bd4 cx=c_pps a=3WNzaoukacrqR9RwcOSAdA==:117 a=3WNzaoukacrqR9RwcOSAdA==:17 a=IkcTkHD0fZMA:10 a=NGcC8JguVDcA:10 a=VkNPw1HP01LnGYTKEx00:22 a=0sLvza09kfJOxVLZPwjg:22 a=Z0pTeXoby7EwIRygza74:22 a=gEfo2CItAAAA:8 a=gAnH3GRIAAAA:8 a=uasTv1xkDq79D4XcAZoA:9 a=3ZKOabzyN94A:10 a=QEXdDO2ut3YA:10 a=sptkURWiP4Gy88Gu7hUp:22 a=t30qsMHlJzOsgWiHt2r7:22 X-Proofpoint-Spam-Details-Enc: AW1haW4tMjYwNTI1MDE2OCBTYWx0ZWRfX10Zgk/1AC06V yjRjpGQO0WUKSt4k+KH0bAXiDCKQV/Cu3K9pb6WtWbZxwepRkGsKUbW3dr+/KGQKvWZrFuEOJnE lmE2EWu1XsvTykpA4UEa+m5nYN+dQp3n2jFIE50UBesbKJBhztP/JHzYLFj9q2IfEkJj0TeKw76 6WwVisQqQ62wbOeSkBFXLyPMqzp3H8Tk0A36U7QvF3M+4Hp1qYHOfgBxrLhR4vCQSuCK96EEGk8 O//e2sZAj4Ihpdwx4mowJNiRmX8I7UjjieF/VeK/nyXYCN0pQ/mvDo1vsQS6Z6bglpbMNwyjPqx jvyOrzfT5vYAfAWuQJ1KgC2vqPrXqHpOmQq9yKmOv21a7vEuS8FLhVJi8Q2/K74lM+W2Tcjp+xm SoV5mo5Ytvkl+QxSZfsYVI4BvTaanHRtTtF/Oy+b3pAr6Vkt2jlPq0kq3KUSWYUIQOJj1mvOgyu JUUrBiMISPtl10Prcbg== X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1143,Hydra:6.1.51,FMLib:17.12.100.49 definitions=2026-05-25_04,2026-05-18_01,2025-10-01_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 phishscore=0 priorityscore=1501 spamscore=0 clxscore=1015 bulkscore=0 suspectscore=0 lowpriorityscore=0 malwarescore=0 adultscore=0 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.22.0-2605130000 definitions=main-2605250168 The ADT7604 shares the same die as the LTC2984. It repurposes the custom RTD sensor type (18) as a copper trace resistance sensor and the custom thermistor type (27) as a leak detector, and removes thermocouple, diode and direct ADC sensor types. Add adi,adt7604 to the compatible list and introduce two new sensor node types specific to this device: - copper-trace@: maps to the custom RTD sensor type (18). Two variants: sub-ohm (< 1 ohm, adi,copper-trace-sub-ohm boolean, no custom table and excitation current) and standard (> 1 ohm, required adi,custom-copper-trace table, optional excitation current defaulting to the datasheet recommended value). Primary output is resistance in ohms. For > 1 ohm copper traces with a custom table, the chip also outputs temperature in millidegrees Celsius. - leak-detector@: maps to the custom thermistor sensor type (27). Takes a required adi,custom-leak-detector lookup table encoding resistance (uOhm) against coverage data (%). Two outputs: resistance in ohms and coverage in percent. Separate node types are used rather than extending the existing rtd@ and thermistor@ nodes because adi,custom-rtd is required for sensor type 18, and several properties (adi,number-of-wires, adi,rtd-curve, adi,rsense-share, adi,single-ended, adi,current-rotate) have no meaning for the new sensor types, since the configuration is hardcoded, and would need to be explicitly forbidden or ignored in the driver. allOf conditions are added to restrict thermocouple, diode, direct ADC and active temperature nodes to non-ADT7604 devices, and to restrict copper-trace and leak-detector nodes to the ADT7604 (some parts only). Signed-off-by: Liviu Stan --- Changes in v4: - Added restrictions for adi,sensor-type = <18> in ^rtd@ nodes and adi,sensor-type = <27> in ^thermistor@ nodes for adi,adt7604 .../bindings/iio/temperature/adi,ltc2983.yaml | 217 +++++++++++++++++- 1 file changed, 214 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index a22725f7619b..ab77f987ee02 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -4,14 +4,18 @@ $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system +title: Analog Devices LTC2983 and similar Multi-sensor Temperature systems maintainers: - Nuno Sá description: | - Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital - Temperature Measurement Systems + Analog Devices Multi-Sensor Digital Temperature Measurement Systems: + - ADT7604 + - LTC2983 + - LTC2984 + - LTC2986 + - LTM2985 https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf @@ -43,6 +47,7 @@ properties: compatible: oneOf: - enum: + - adi,adt7604 - adi,ltc2983 - adi,ltc2986 - adi,ltm2985 @@ -436,6 +441,121 @@ patternProperties: required: - adi,custom-temp + '^copper-trace@': + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: | + Copper trace resistance sensor (some parts only). Two variants exist: + sub-ohm (< 1 ohm, no custom table allowed) and standard (> 1 ohm, + required custom table). + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: Sensor type for copper trace sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 32 + + adi,rsense-handle: + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle + + adi,copper-trace-sub-ohm: + description: + Select the sub-ohm (< 1 ohm) copper trace variant. Custom table + and excitation current are not allowed in this mode. + type: boolean + + adi,excitation-current-microamp: + description: + Excitation current applied to the copper trace. Not used in + sub-ohm mode. The datasheet recommends 1mA for copper trace + sensors due to their typically small resistance. + enum: [5, 10, 25, 50, 100, 250, 500, 1000] + default: 1000 + + adi,custom-copper-trace: + description: + Resistance-to-temperature table for copper trace sensors with + resistance > 1 ohm. Required when adi,copper-trace-sub-ohm is not + set. See Page 36 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Resistance point in uOhms. + - description: Temperature point in uK. + + required: + - adi,rsense-handle + + allOf: + - if: + required: + - adi,copper-trace-sub-ohm + then: + properties: + adi,custom-copper-trace: false + adi,excitation-current-microamp: false + - if: + not: + required: + - adi,copper-trace-sub-ohm + then: + required: + - adi,custom-copper-trace + + '^leak-detector@': + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: | + Leak detector sensor (some parts only). Outputs resistance in ohms and + a coverage percentage via IIO_COVERAGE (raw/1024 = coverage %). + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: Sensor type for leak detector sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 33 + + adi,rsense-handle: + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle + + adi,excitation-current-nanoamp: + description: + Excitation current applied to the leak detector. The correct value + depends on the electrical characteristics of the liquid being sensed. + For example, 10000 (10µA) is recommended for PG25 (see datasheet + Table 39). + enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] + + adi,custom-leak-detector: + description: | + Lookup table mapping resistance to coverage percentage. Entries must + be in ascending resistance order. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Resistance point in uOhms. + - description: Coverage data percentage (0 to 100). + + required: + - adi,rsense-handle + - adi,excitation-current-nanoamp + - adi,custom-leak-detector + '^rsense@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false @@ -477,6 +597,32 @@ allOf: patternProperties: '^temp@': false + - if: + properties: + compatible: + contains: + const: adi,adt7604 + then: + patternProperties: + '^thermocouple@': false + '^diode@': false + '^adc@': false + '^temp@': false + '^rtd@': + properties: + adi,sensor-type: + not: + const: 18 + '^thermistor@': + properties: + adi,sensor-type: + not: + const: 27 + else: + patternProperties: + '^copper-trace@': false + '^leak-detector@': false + examples: - | #include @@ -556,4 +702,69 @@ examples: }; }; }; + + - | + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@0 { + compatible = "adi,adt7604"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&supply>; + + trace_rsense: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <100000>; // 100 ohm + }; + + copper-trace@4 { + reg = <4>; + adi,sensor-type = <32>; + adi,rsense-handle = <&trace_rsense>; + adi,copper-trace-sub-ohm; + }; + + r_sense: rsense@12 { + reg = <12>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <1000000>; // 1 kohm + }; + + leak-detector@14 { + reg = <14>; + adi,sensor-type = <33>; + adi,rsense-handle = <&r_sense>; + adi,excitation-current-nanoamp = <10000>; + adi,custom-leak-detector = + /bits/ 64 < 0 100>, + /bits/ 64 < 202020000 99>, + /bits/ 64 < 285710000 70>, + /bits/ 64 < 333330000 60>, + /bits/ 64 < 400000000 50>, + /bits/ 64 < 500000000 40>, + /bits/ 64 < 666670000 30>, + /bits/ 64 < 1000000000 20>, + /bits/ 64 < 2000000000 10>, + /bits/ 64 <1000000000000 0>; + }; + + rtd@18 { + reg = <18>; + adi,sensor-type = <12>; // PT100 + adi,rsense-handle = <&r_sense>; + adi,number-of-wires = <2>; + adi,rsense-share; + adi,excitation-current-microamp = <500>; + adi,rtd-curve = <0>; + }; + }; + }; ... -- 2.43.0