From: Christian Marangi <ansuelsmth@gmail.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney@redhat.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Felix Fietkau <nbd@nbd.name>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Christian Marangi <ansuelsmth@gmail.com>
Subject: [PATCH v5 1/3] dt-bindings: clock: airoha: Document support for AN7583 clock
Date: Thu, 28 May 2026 20:59:54 +0200 [thread overview]
Message-ID: <20260528190000.9164-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20260528190000.9164-1-ansuelsmth@gmail.com>
Document support for Airoha AN7583 clock. This is based on the EN7523
clock schema with the new requirement of the "airoha,chip-scu".
Add additional binding for additional clock and reset lines.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
.../bindings/clock/airoha,en7523-scu.yaml | 18 ++++++
include/dt-bindings/clock/en7523-clk.h | 3 +
.../dt-bindings/reset/airoha,an7583-reset.h | 62 +++++++++++++++++++
3 files changed, 83 insertions(+)
create mode 100644 include/dt-bindings/reset/airoha,an7583-reset.h
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
index eb24a5687639..6c3c88798515 100644
--- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -30,6 +30,7 @@ properties:
compatible:
items:
- enum:
+ - airoha,an7583-scu
- airoha,en7523-scu
- airoha,en7581-scu
- econet,en751221-scu
@@ -50,12 +51,29 @@ properties:
description: ID of the controller reset line
const: 1
+ airoha,chip-scu:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to Chip SCU
+
required:
- compatible
- reg
- '#clock-cells'
allOf:
+ - if:
+ properties:
+ compatible:
+ const: airoha,an7583-scu
+
+ then:
+ required:
+ - airoha,chip-scu
+
+ else:
+ properties:
+ airoha,chip-scu: false
+
- if:
properties:
compatible:
diff --git a/include/dt-bindings/clock/en7523-clk.h b/include/dt-bindings/clock/en7523-clk.h
index edfa64045f52..0fbbcb7b1b25 100644
--- a/include/dt-bindings/clock/en7523-clk.h
+++ b/include/dt-bindings/clock/en7523-clk.h
@@ -14,4 +14,7 @@
#define EN7581_CLK_EMMC 8
+#define AN7583_CLK_MDIO0 9
+#define AN7583_CLK_MDIO1 10
+
#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
diff --git a/include/dt-bindings/reset/airoha,an7583-reset.h b/include/dt-bindings/reset/airoha,an7583-reset.h
new file mode 100644
index 000000000000..7ff07986f8ba
--- /dev/null
+++ b/include/dt-bindings/reset/airoha,an7583-reset.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024 AIROHA Inc
+ * Author: Christian Marangi <ansuelsmth@gmail.com>
+ */
+
+#ifndef __DT_BINDINGS_RESET_CONTROLLER_AIROHA_AN7583_H_
+#define __DT_BINDINGS_RESET_CONTROLLER_AIROHA_AN7583_H_
+
+/* RST_CTRL2 */
+#define AN7583_XPON_PHY_RST 0
+#define AN7583_GPON_OLT_RST 1
+#define AN7583_CPU_TIMER2_RST 2
+#define AN7583_HSUART_RST 3
+#define AN7583_UART4_RST 4
+#define AN7583_UART5_RST 5
+#define AN7583_I2C2_RST 6
+#define AN7583_XSI_MAC_RST 7
+#define AN7583_XSI_PHY_RST 8
+#define AN7583_NPU_RST 9
+#define AN7583_TRNG_MSTART_RST 10
+#define AN7583_DUAL_HSI0_RST 11
+#define AN7583_DUAL_HSI1_RST 12
+#define AN7583_DUAL_HSI0_MAC_RST 13
+#define AN7583_DUAL_HSI1_MAC_RST 14
+#define AN7583_XPON_XFI_RST 15
+#define AN7583_WDMA_RST 16
+#define AN7583_WOE0_RST 17
+#define AN7583_HSDMA_RST 18
+#define AN7583_TDMA_RST 19
+#define AN7583_EMMC_RST 20
+#define AN7583_SOE_RST 21
+#define AN7583_XFP_MAC_RST 22
+#define AN7583_MDIO0 23
+#define AN7583_MDIO1 24
+/* RST_CTRL1 */
+#define AN7583_PCM1_ZSI_ISI_RST 25
+#define AN7583_FE_PDMA_RST 26
+#define AN7583_FE_QDMA_RST 27
+#define AN7583_PCM_SPIWP_RST 28
+#define AN7583_CRYPTO_RST 29
+#define AN7583_TIMER_RST 30
+#define AN7583_PCM1_RST 31
+#define AN7583_UART_RST 32
+#define AN7583_GPIO_RST 33
+#define AN7583_GDMA_RST 34
+#define AN7583_I2C_MASTER_RST 35
+#define AN7583_PCM2_ZSI_ISI_RST 36
+#define AN7583_SFC_RST 37
+#define AN7583_UART2_RST 38
+#define AN7583_GDMP_RST 39
+#define AN7583_FE_RST 40
+#define AN7583_USB_HOST_P0_RST 41
+#define AN7583_GSW_RST 42
+#define AN7583_SFC2_PCM_RST 43
+#define AN7583_PCIE0_RST 44
+#define AN7583_PCIE1_RST 45
+#define AN7583_CPU_TIMER_RST 46
+#define AN7583_PCIE_HB_RST 47
+#define AN7583_XPON_MAC_RST 48
+
+#endif /* __DT_BINDINGS_RESET_CONTROLLER_AIROHA_AN7583_H_ */
--
2.53.0
next prev parent reply other threads:[~2026-05-28 19:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-28 18:59 [PATCH v5 0/3] clk: add support for Airoha AN7583 clock Christian Marangi
2026-05-28 18:59 ` Christian Marangi [this message]
2026-05-28 19:10 ` [PATCH v5 1/3] dt-bindings: clock: airoha: Document support for " sashiko-bot
2026-05-28 18:59 ` [PATCH v5 2/3] clk: en7523: generalize register clocks function Christian Marangi
2026-05-28 19:29 ` sashiko-bot
2026-05-28 18:59 ` [PATCH v5 3/3] clk: en7523: add support for Airoha AN7583 clock Christian Marangi
2026-05-28 20:10 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260528190000.9164-2-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=bmasney@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nbd@nbd.name \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox