From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Antoniu Miclaus" <antoniu.miclaus@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
linux@analog.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] iio: adc: ad4080: add support for AD4884
Date: Fri, 29 May 2026 17:13:53 +0300 [thread overview]
Message-ID: <20260529141353.8492-3-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20260529141353.8492-1-antoniu.miclaus@analog.com>
Add support for the AD4884, a dual-channel, 16-bit, 40 MSPS SAR ADC.
The AD4884 is the dual-channel variant of the AD4084, sharing the same
register map and SPI interface as the rest of the AD4080 family. Like
the AD4880, it uses two independent ADC channels, each with its own SPI
configuration interface.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
Changes in v2:
- No changes.
drivers/iio/adc/ad4080.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/iio/adc/ad4080.c b/drivers/iio/adc/ad4080.c
index 265d85ac171a..764d49eca9e0 100644
--- a/drivers/iio/adc/ad4080.c
+++ b/drivers/iio/adc/ad4080.c
@@ -136,6 +136,7 @@
#define AD4087_CHIP_ID 0x0057
#define AD4088_CHIP_ID 0x0058
#define AD4880_CHIP_ID 0x0750
+#define AD4884_CHIP_ID 0x005C
#define AD4080_MAX_CHANNELS 2
@@ -541,6 +542,11 @@ static const struct iio_chan_spec ad4880_channels[] = {
AD4880_CHANNEL_DEFINE(20, 32, 1),
};
+static const struct iio_chan_spec ad4884_channels[] = {
+ AD4880_CHANNEL_DEFINE(16, 16, 0),
+ AD4880_CHANNEL_DEFINE(16, 16, 1),
+};
+
static const struct ad4080_chip_info ad4080_chip_info = {
.name = "ad4080",
.product_id = AD4080_CHIP_ID,
@@ -641,6 +647,16 @@ static const struct ad4080_chip_info ad4880_chip_info = {
.lvds_cnv_clk_cnt_max = AD4080_LVDS_CNV_CLK_CNT_MAX,
};
+static const struct ad4080_chip_info ad4884_chip_info = {
+ .name = "ad4884",
+ .product_id = AD4884_CHIP_ID,
+ .scale_table = ad4080_scale_table,
+ .num_scales = ARRAY_SIZE(ad4080_scale_table),
+ .num_channels = 2,
+ .channels = ad4884_channels,
+ .lvds_cnv_clk_cnt_max = 2,
+};
+
static int ad4080_setup_channel(struct ad4080_state *st, unsigned int ch)
{
struct device *dev = regmap_get_device(st->regmap[ch]);
@@ -843,6 +859,7 @@ static const struct spi_device_id ad4080_id[] = {
{ "ad4087", (kernel_ulong_t)&ad4087_chip_info },
{ "ad4088", (kernel_ulong_t)&ad4088_chip_info },
{ "ad4880", (kernel_ulong_t)&ad4880_chip_info },
+ { "ad4884", (kernel_ulong_t)&ad4884_chip_info },
{ }
};
MODULE_DEVICE_TABLE(spi, ad4080_id);
@@ -858,6 +875,7 @@ static const struct of_device_id ad4080_of_match[] = {
{ .compatible = "adi,ad4087", &ad4087_chip_info },
{ .compatible = "adi,ad4088", &ad4088_chip_info },
{ .compatible = "adi,ad4880", &ad4880_chip_info },
+ { .compatible = "adi,ad4884", &ad4884_chip_info },
{ }
};
MODULE_DEVICE_TABLE(of, ad4080_of_match);
--
2.43.0
next prev parent reply other threads:[~2026-05-29 14:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-29 14:13 [PATCH v2 0/2] iio: adc: ad4080: add support for AD4884 Antoniu Miclaus
2026-05-29 14:13 ` [PATCH v2 1/2] dt-bindings: iio: adc: ad4080: add AD4884 support Antoniu Miclaus
2026-05-29 14:13 ` Antoniu Miclaus [this message]
2026-05-29 17:15 ` [PATCH v2 0/2] iio: adc: ad4080: add support for AD4884 Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260529141353.8492-3-antoniu.miclaus@analog.com \
--to=antoniu.miclaus@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox