From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, andriy.shevchenko@intel.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V10 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607
Date: Thu, 4 Jun 2026 15:18:30 -0500 [thread overview]
Message-ID: <20260604201832.60656-9-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260604201832.60656-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add gyroscope functions to the icm42607 driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/iio/imu/inv_icm42607/Makefile | 1 +
drivers/iio/imu/inv_icm42607/inv_icm42607.h | 8 +
.../iio/imu/inv_icm42607/inv_icm42607_core.c | 48 ++
.../iio/imu/inv_icm42607/inv_icm42607_gyro.c | 437 ++++++++++++++++++
4 files changed, 494 insertions(+)
create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index d74b23b1e1bec..7b907e0196017 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
inv-icm42607-y += inv_icm42607_core.o
+inv-icm42607-y += inv_icm42607_gyro.o
inv-icm42607-y += inv_icm42607_accel.o
inv-icm42607-y += inv_icm42607_temp.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index fb4bcc2b7da54..b2f081ec8776c 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -134,6 +134,7 @@ struct inv_icm42607_suspended {
* @orientation: sensor chip orientation relative to main hardware.
* @conf: chip sensors configurations.
* @suspended: suspended sensors configuration.
+ * @indio_gyro: gyroscope IIO device.
* @indio_accel: accelerometer IIO device.
* @buffer: data transfer buffer aligned for DMA.
*/
@@ -146,6 +147,7 @@ struct inv_icm42607_state {
struct iio_mount_matrix orientation;
struct inv_icm42607_conf conf;
struct inv_icm42607_suspended suspended;
+ struct iio_dev *indio_gyro;
struct iio_dev *indio_accel;
__be16 buffer[3] __aligned(IIO_DMA_MINALIGN);
};
@@ -401,6 +403,10 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
struct inv_icm42607_sensor_conf *conf,
unsigned int *sleep_ms);
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+ struct inv_icm42607_sensor_conf *conf,
+ unsigned int *sleep_ms);
+
int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
unsigned int *sleep_ms);
@@ -408,6 +414,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
const struct inv_icm42607_hw *hw,
inv_icm42607_bus_setup bus_setup);
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st);
+
struct iio_dev *inv_icm42607_accel_init(struct inv_icm42607_state *st);
#endif
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 5f311cba0572c..fd06ef5ab1e6f 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -206,6 +206,49 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
st->conf.temp_en, sleep_ms);
}
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+ struct inv_icm42607_sensor_conf *conf,
+ unsigned int *sleep_ms)
+{
+ struct inv_icm42607_sensor_conf *oldconf = &st->conf.gyro;
+ unsigned int val;
+ int ret;
+
+ if (conf->mode < 0)
+ conf->mode = oldconf->mode;
+ if (conf->fs < 0)
+ conf->fs = oldconf->fs;
+ if (conf->odr < 0)
+ conf->odr = oldconf->odr;
+ if (conf->filter < 0)
+ conf->filter = oldconf->filter;
+
+ if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+ val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_FS_SEL_MASK,
+ conf->fs);
+ val |= FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_ODR_MASK,
+ conf->odr);
+ ret = regmap_write(st->map, INV_ICM42607_REG_GYRO_CONFIG0, val);
+ if (ret)
+ return ret;
+ oldconf->fs = conf->fs;
+ oldconf->odr = conf->odr;
+ }
+
+ if (conf->filter != oldconf->filter) {
+ val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG1_FILTER_MASK,
+ conf->filter);
+ ret = regmap_update_bits(st->map, INV_ICM42607_REG_GYRO_CONFIG1,
+ INV_ICM42607_GYRO_CONFIG1_FILTER_MASK, val);
+ if (ret)
+ return ret;
+ oldconf->filter = conf->filter;
+ }
+
+ return inv_icm42607_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode,
+ st->conf.temp_en, sleep_ms);
+}
+
int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
unsigned int *sleep_ms)
{
@@ -421,6 +464,11 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (IS_ERR(st->indio_accel))
return PTR_ERR(st->indio_accel);
+ /* Initialize IIO device for Gyro */
+ st->indio_gyro = inv_icm42607_gyro_init(st);
+ if (IS_ERR(st->indio_gyro))
+ return PTR_ERR(st->indio_gyro);
+
return 0;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
new file mode 100644
index 0000000000000..0f2703342122b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+#define INV_ICM42607_GYRO_CHAN(_modifier, _index, _ext_info) \
+{ \
+ .type = IIO_ANGL_VEL, \
+ .modified = 1, \
+ .channel2 = _modifier, \
+ .info_mask_separate = \
+ BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+ .ext_info = _ext_info, \
+}
+
+enum inv_icm42607_gyro_scan {
+ INV_ICM42607_GYRO_SCAN_X,
+ INV_ICM42607_GYRO_SCAN_Y,
+ INV_ICM42607_GYRO_SCAN_Z,
+ INV_ICM42607_GYRO_SCAN_TEMP,
+ INV_ICM42607_GYRO_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42607_gyro_ext_infos[] = {
+ IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42607_get_mount_matrix),
+ { }
+};
+
+static const struct iio_chan_spec inv_icm42607_gyro_channels[] = {
+ INV_ICM42607_GYRO_CHAN(IIO_MOD_X, INV_ICM42607_GYRO_SCAN_X,
+ inv_icm42607_gyro_ext_infos),
+ INV_ICM42607_GYRO_CHAN(IIO_MOD_Y, INV_ICM42607_GYRO_SCAN_Y,
+ inv_icm42607_gyro_ext_infos),
+ INV_ICM42607_GYRO_CHAN(IIO_MOD_Z, INV_ICM42607_GYRO_SCAN_Z,
+ inv_icm42607_gyro_ext_infos),
+ INV_ICM42607_TEMP_CHAN(INV_ICM42607_GYRO_SCAN_TEMP),
+ IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42607_GYRO_SCAN_TIMESTAMP),
+};
+
+#define INV_ICM42607_SCAN_MASK_GYRO_3AXIS \
+ (BIT(INV_ICM42607_GYRO_SCAN_X) | \
+ BIT(INV_ICM42607_GYRO_SCAN_Y) | \
+ BIT(INV_ICM42607_GYRO_SCAN_Z))
+
+#define INV_ICM42607_SCAN_MASK_TEMP BIT(INV_ICM42607_GYRO_SCAN_TEMP)
+
+static const unsigned long inv_icm42607_gyro_scan_masks[] = {
+ INV_ICM42607_SCAN_MASK_GYRO_3AXIS,
+ INV_ICM42607_SCAN_MASK_GYRO_3AXIS | INV_ICM42607_SCAN_MASK_TEMP,
+ 0
+};
+
+/* enable gyroscope sensor */
+static int inv_icm42607_gyro_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+ unsigned int sleep_gyro = 0;
+ unsigned int sleep_temp = 0;
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ if (*scan_mask & INV_ICM42607_SCAN_MASK_TEMP) {
+ /* enable temp sensor */
+ ret = inv_icm42607_set_temp_conf(st, true, &sleep_temp);
+ if (ret)
+ goto out_unlock;
+ }
+
+ if (*scan_mask & INV_ICM42607_SCAN_MASK_GYRO_3AXIS) {
+ /* enable gyro sensor */
+ conf.mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+ ret = inv_icm42607_set_gyro_conf(st, &conf, &sleep_gyro);
+ if (ret)
+ goto out_unlock;
+ }
+
+out_unlock:
+ mutex_unlock(&st->lock);
+ /* sleep maximum required time */
+ msleep(max(sleep_gyro, sleep_temp));
+ return ret;
+}
+
+static int inv_icm42607_gyro_read_sensor(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ s16 *val)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+ struct device *dev = regmap_get_device(st->map);
+ struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+ unsigned int reg;
+ __be16 *data;
+ int ret;
+
+ if (chan->type != IIO_ANGL_VEL)
+ return -EINVAL;
+
+ switch (chan->channel2) {
+ case IIO_MOD_X:
+ reg = INV_ICM42607_REG_GYRO_DATA_X1;
+ break;
+ case IIO_MOD_Y:
+ reg = INV_ICM42607_REG_GYRO_DATA_Y1;
+ break;
+ case IIO_MOD_Z:
+ reg = INV_ICM42607_REG_GYRO_DATA_Z1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+ ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+ if (ret)
+ return ret;
+
+ guard(mutex)(&st->lock);
+
+ /* enable gyro sensor */
+ conf.mode = gyro_st->power_mode;
+ ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+ if (ret)
+ return ret;
+
+ /* read gyro register data */
+ data = &st->buffer[0];
+ ret = regmap_bulk_read(st->map, reg, data, sizeof(*data));
+ if (ret)
+ return ret;
+
+ *val = be16_to_cpup(data);
+ if (*val == INV_ICM42607_DATA_INVALID)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const int inv_icm42607_gyro_scale_nano[][2] = {
+ [INV_ICM42607_GYRO_FS_2000DPS] = { 0, 1065264 },
+ [INV_ICM42607_GYRO_FS_1000DPS] = { 0, 532632 },
+ [INV_ICM42607_GYRO_FS_500DPS] = { 0, 266316 },
+ [INV_ICM42607_GYRO_FS_250DPS] = { 0, 133158 },
+};
+
+static int inv_icm42607_gyro_read_scale(struct iio_dev *indio_dev,
+ int *val, int *val2)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ unsigned int idx;
+
+ idx = st->conf.gyro.fs;
+
+ *val = inv_icm42607_gyro_scale_nano[idx][0];
+ *val2 = inv_icm42607_gyro_scale_nano[idx][1];
+ return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42607_gyro_write_scale(struct iio_dev *indio_dev,
+ int val, int val2)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ struct device *dev = regmap_get_device(st->map);
+ unsigned int idx;
+ struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+ size_t scales_len = ARRAY_SIZE(inv_icm42607_gyro_scale_nano);
+ int ret;
+
+ for (idx = 0; idx < scales_len; idx++) {
+ if (val == inv_icm42607_gyro_scale_nano[idx][0] &&
+ val2 == inv_icm42607_gyro_scale_nano[idx][1])
+ break;
+ }
+ if (idx >= scales_len)
+ return -EINVAL;
+
+ conf.fs = idx;
+
+ PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+ ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+ if (ret)
+ return ret;
+
+ guard(mutex)(&st->lock);
+
+ return inv_icm42607_set_gyro_conf(st, &conf, NULL);
+}
+
+static const int inv_icm42607_gyro_odr[][2] = {
+ [INV_ICM42607_ODR_12_5HZ] = { 12, 500000 },
+ [INV_ICM42607_ODR_25HZ] = { 25, 0 },
+ [INV_ICM42607_ODR_50HZ] = { 50, 0 },
+ [INV_ICM42607_ODR_100HZ] = { 100, 0 },
+ [INV_ICM42607_ODR_200HZ] = { 200, 0 },
+ [INV_ICM42607_ODR_400HZ] = { 400, 0 },
+ [INV_ICM42607_ODR_800HZ] = { 800, 0 },
+ [INV_ICM42607_ODR_1600HZ] = { 1600, 0 },
+};
+
+static int inv_icm42607_gyro_read_odr(struct inv_icm42607_state *st,
+ int *val, int *val2)
+{
+ unsigned int odr;
+ unsigned int i;
+
+ odr = st->conf.gyro.odr;
+
+ for (i = 5; i < ARRAY_SIZE(inv_icm42607_gyro_odr); ++i) {
+ if (i == odr)
+ break;
+ }
+ if (i >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+ return -EINVAL;
+
+ *val = inv_icm42607_gyro_odr[i][0];
+ *val2 = inv_icm42607_gyro_odr[i][1];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42607_gyro_write_odr(struct iio_dev *indio_dev,
+ int val, int val2)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+ struct inv_sensors_timestamp *ts = &gyro_st->ts;
+ struct device *dev = regmap_get_device(st->map);
+ unsigned int idx;
+ struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+ int ret;
+
+ for (idx = 5; idx < ARRAY_SIZE(inv_icm42607_gyro_odr); ++idx) {
+ if (val == inv_icm42607_gyro_odr[idx][0] &&
+ val2 == inv_icm42607_gyro_odr[idx][1])
+ break;
+ }
+ if (idx >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+ return -EINVAL;
+
+ conf.odr = idx;
+
+ PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+ ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+ if (ret)
+ return ret;
+
+ guard(mutex)(&st->lock);
+
+ ret = inv_sensors_timestamp_update_odr(ts, inv_icm42607_odr_to_period(conf.odr),
+ iio_buffer_enabled(indio_dev));
+ if (ret)
+ return ret;
+
+ ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int inv_icm42607_gyro_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ s16 data;
+ int ret;
+
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ break;
+ case IIO_TEMP:
+ return inv_icm42607_temp_read_raw(indio_dev, chan, val, val2, mask);
+ default:
+ return -EINVAL;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (!iio_device_claim_direct(indio_dev))
+ return -EBUSY;
+ ret = inv_icm42607_gyro_read_sensor(indio_dev, chan, &data);
+ iio_device_release_direct(indio_dev);
+ if (ret)
+ return ret;
+ *val = data;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ return inv_icm42607_gyro_read_scale(indio_dev, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return inv_icm42607_gyro_read_odr(st, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_icm42607_gyro_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals,
+ int *type, int *length, long mask)
+{
+ if (chan->type != IIO_ANGL_VEL)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (const int *)inv_icm42607_gyro_scale_nano;
+ *type = IIO_VAL_INT_PLUS_NANO;
+ *length = ARRAY_SIZE(inv_icm42607_gyro_scale_nano) * 2;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *vals = (const int *)inv_icm42607_gyro_odr[5];
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ *length = (ARRAY_SIZE(inv_icm42607_gyro_odr) - 5) * 2;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_icm42607_gyro_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int ret;
+
+ if (chan->type != IIO_ANGL_VEL)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ if (!iio_device_claim_direct(indio_dev))
+ return -EBUSY;
+ ret = inv_icm42607_gyro_write_scale(indio_dev, val, val2);
+ iio_device_release_direct(indio_dev);
+ return ret;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return inv_icm42607_gyro_write_odr(indio_dev, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_icm42607_gyro_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ if (chan->type != IIO_ANGL_VEL)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info inv_icm42607_gyro_info = {
+ .read_raw = inv_icm42607_gyro_read_raw,
+ .read_avail = inv_icm42607_gyro_read_avail,
+ .write_raw = inv_icm42607_gyro_write_raw,
+ .write_raw_get_fmt = inv_icm42607_gyro_write_raw_get_fmt,
+ .update_scan_mode = inv_icm42607_gyro_update_scan_mode,
+};
+
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st)
+{
+ struct device *dev = regmap_get_device(st->map);
+ const char *name;
+ struct inv_icm42607_sensor_state *gyro_st;
+ struct inv_sensors_timestamp_chip ts_chip;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ name = devm_kasprintf(dev, GFP_KERNEL, "%s-gyro", st->hw->name);
+ if (!name)
+ return ERR_PTR(-ENOMEM);
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*gyro_st));
+ if (!indio_dev)
+ return ERR_PTR(-ENOMEM);
+ gyro_st = iio_priv(indio_dev);
+
+ gyro_st->power_mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+
+ /*
+ * clock period is 32kHz (31250ns)
+ * jitter is +/- 2% (20 per mille)
+ */
+ ts_chip.clock_period = 31250;
+ ts_chip.jitter = 20;
+ ts_chip.init_period = inv_icm42607_odr_to_period(st->conf.gyro.odr);
+ inv_sensors_timestamp_init(&gyro_st->ts, &ts_chip);
+
+ iio_device_set_drvdata(indio_dev, st);
+ indio_dev->name = name;
+ indio_dev->info = &inv_icm42607_gyro_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = inv_icm42607_gyro_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_icm42607_gyro_channels);
+ indio_dev->available_scan_masks = inv_icm42607_gyro_scan_masks;
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return indio_dev;
+}
--
2.43.0
next prev parent reply other threads:[~2026-06-04 20:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-04 20:18 [PATCH V10 0/9] Add Invensense ICM42607 Chris Morgan
2026-06-04 20:18 ` [PATCH V10 1/9] dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600 Chris Morgan
2026-06-04 20:18 ` [PATCH V10 2/9] dt-bindings: iio: imu: icm42600: Add icm42607 Chris Morgan
2026-06-04 20:18 ` [PATCH V10 3/9] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver Chris Morgan
2026-06-04 20:45 ` sashiko-bot
2026-06-04 20:18 ` [PATCH V10 4/9] iio: imu: inv_icm42607: Add I2C and SPI For icm42607 Chris Morgan
2026-06-04 20:18 ` [PATCH V10 5/9] iio: imu: inv_icm42607: Add PM support for icm42607 Chris Morgan
2026-06-04 21:17 ` sashiko-bot
2026-06-04 20:18 ` [PATCH V10 6/9] iio: imu: inv_icm42607: Add Temp Support in icm42607 Chris Morgan
2026-06-04 21:34 ` sashiko-bot
2026-06-04 20:18 ` [PATCH V10 7/9] iio: imu: inv_icm42607: Add Accelerometer for icm42607 Chris Morgan
2026-06-04 21:45 ` sashiko-bot
2026-06-04 20:18 ` Chris Morgan [this message]
2026-06-04 22:02 ` [PATCH V10 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607 sashiko-bot
2026-06-04 20:18 ` [PATCH V10 9/9] arm64: dts: rockchip: Add icm42607p IMU for RG-DS Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260604201832.60656-9-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=heiko@sntech.de \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox