Devicetree
 help / color / mirror / Atom feed
From: Alex Elder <elder@riscstar.com>
To: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com,
	maxime.chevallier@bootlin.com, rmk+kernel@armlinux.org.uk,
	andersson@kernel.org, konradybcio@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, linusw@kernel.org,
	brgl@kernel.org, arnd@arndb.de, gregkh@linuxfoundation.org
Cc: Daniel Thompson <daniel@riscstar.com>,
	elder@riscstar.com, mohd.anwar@oss.qualcomm.com,
	a0987203069@gmail.com, alexandre.torgue@foss.st.com,
	ast@kernel.org, boon.khai.ng@altera.com, chenchuangyu@xiaomi.com,
	chenhuacai@kernel.org, daniel@iogearbox.net, hawk@kernel.org,
	hkallweit1@gmail.com, inochiama@gmail.com,
	john.fastabend@gmail.com, julianbraha@gmail.com,
	livelycarpet87@gmail.com, mcoquelin.stm32@gmail.com, me@ziyao.cc,
	prabhakar.mahadev-lad.rj@bp.renesas.com,
	richardcochran@gmail.com, rohan.g.thomas@altera.com,
	sdf@fomichev.me, siyanteng@cqsoftware.com.cn,
	weishangjuan@eswincomputing.com, wens@kernel.org,
	netdev@vger.kernel.org, bpf@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-gpio@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2 14/14] arm64: dts: qcom: qcs6490-rb3gen2: enable TC9564 with a single QCA8081 phy
Date: Thu,  4 Jun 2026 20:00:21 -0500	[thread overview]
Message-ID: <20260605010022.968612-15-elder@riscstar.com> (raw)
In-Reply-To: <20260605010022.968612-1-elder@riscstar.com>

From: Daniel Thompson <daniel@riscstar.com>

The QCS6490 RB3Gen2 includes a Toshiba TC9564 (a.k.a. Qualcomm QPS615).
TC9564 is an twin Ethernet-AVB/TSN bridge with an integrated PCIe switch.

Downstream PCIe switch port 3 has an embedded PCIe endpoint, which
includes two functions.  The GPIO controller embedded within the
TC9564 is accessed via memory-mapped I/O through the first PCIe
function's BAR4.

Both embedded PCIe functions have an attached Synopsys XGMAC, but
not all RB3gen2 builds include PHYs on both ports.  All versions
include a TC9564 combined with a single QCA8081 attached to eMAC1.

Add properties to the existing PCI nodes to describe how the TC9564 and
QCA8081 are connected to each other (and to the host SoC).

Signed-off-by: Daniel Thompson <daniel@riscstar.com>
Co-developed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
---
Checkpatch notes:
  - pci1179 is not a recognized vendor ID
  - Some lines are longer than recommented

 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 48 ++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index e393ccf1884af..1d83b07360a33 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -308,6 +308,15 @@ vdd_ntn_1p8: regulator-vdd-ntn-1p8 {
 		regulator-enable-ramp-delay = <10000>;
 	};
 
+	qep_1p8: regulator-qep-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "qep_1p8";
+		gpio = <&pm7325_gpios 8 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+	};
+
 	wcn6750-pmu {
 		compatible = "qcom,wcn6750-pmu";
 		pinctrl-0 = <&bt_en>;
@@ -938,19 +947,51 @@ pcie@3,0 {
 			bus-range = <0x5 0xff>;
 
 			pci@0,0 {
+				compatible = "pci1179,0220";
 				reg = <0x50000 0x0 0x0 0x0 0x0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
 				ranges;
+
+				tc9564_gpio0: gpio {
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
 			};
 
 			pci@0,1 {
+				compatible = "pci1179,0220";
 				reg = <0x50100 0x0 0x0 0x0 0x0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
 				ranges;
+
+				ethernet {
+					phy-mode = "sgmii";
+					phy-handle = <&tc9564_emac1_phy>;
+
+					mdio {
+						compatible = "snps,dwmac-mdio";
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						tc9564_emac1_phy: ethernet-phy@1c {
+							compatible = "ethernet-phy-id004d.d101";
+							reg = <0x1c>;
+							snps,reset = <&tc9564_gpio0 1 GPIO_ACTIVE_LOW>;
+							reset-assert-us = <11000>;
+							reset-deassert-us = <70000>;
+
+							vdd18-supply = <&qep_1p8>;
+
+							pinctrl-names = "default";
+							pinctrl-0 = <&qep_irq_pin>;
+							interrupts-extended = <&tlmm 101 IRQ_TYPE_LEVEL_LOW>;
+						};
+					};
+				};
 			};
 		};
 	};
@@ -1524,6 +1565,13 @@ usb_hub_reset_state: usb-hub-reset-state {
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	qep_irq_pin: qep-irq-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &lpass_audiocc {
-- 
2.51.0


      parent reply	other threads:[~2026-06-05  1:01 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-05  1:00 [PATCH net-next v2 00/14] net: enable TC956x support Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 01/14] dt-bindings: net: qca,qca808x: Add regulator properties Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 02/14] net: phy: qcom: qca808x: Add regulator management Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 03/14] net: pcs: pcs-xpcs-regmap: support XPCS memory-mapped MDIO bus via regmap Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 04/14] net: pcs: xpcs: re-order xpcs_pre_config() to update after the reset Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 05/14] net: pcs: pcs-xpcs: select operating mode for 10G-baseR capable PCS Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 06/14] net: stmmac: dma: create a separate dma_device pointer Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 07/14] net: stmmac: dwxgmac2: Add multi MSI interrupt mode Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 08/14] net: stmmac: dwxgmac2: Add XGMAC 3.01a support Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 09/14] net: stmmac: dwxgmac2: export symbols for XGMAC 3.01a DMA Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 10/14] dt-bindings: net: toshiba,tc9654-dwmac: add TC9564 Ethernet bridge Alex Elder
2026-06-05  2:40   ` Rob Herring (Arm)
2026-06-05  1:00 ` [PATCH net-next v2 11/14] misc: tc956x_pci: add TC956x/QPS615 support Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 12/14] gpio: tc956x: " Alex Elder
2026-06-05  1:00 ` [PATCH net-next v2 13/14] net: stmmac: " Alex Elder
2026-06-05  1:00 ` Alex Elder [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260605010022.968612-15-elder@riscstar.com \
    --to=elder@riscstar.com \
    --cc=a0987203069@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andersson@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=ast@kernel.org \
    --cc=boon.khai.ng@altera.com \
    --cc=bpf@vger.kernel.org \
    --cc=brgl@kernel.org \
    --cc=chenchuangyu@xiaomi.com \
    --cc=chenhuacai@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=daniel@riscstar.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hawk@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=inochiama@gmail.com \
    --cc=john.fastabend@gmail.com \
    --cc=julianbraha@gmail.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=livelycarpet87@gmail.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=me@ziyao.cc \
    --cc=mohd.anwar@oss.qualcomm.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=richardcochran@gmail.com \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robh@kernel.org \
    --cc=rohan.g.thomas@altera.com \
    --cc=sdf@fomichev.me \
    --cc=siyanteng@cqsoftware.com.cn \
    --cc=weishangjuan@eswincomputing.com \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox