Re: [PATCH 1/2] dt-bindings: thermal: Add Qualcomm MBG thermal monitor support

[Krzysztof Kozlowski <krzk@kernel.org>]

On Mon, Jun 01, 2026 at 04:31:18PM +0530, Sachin Gupta wrote:
> From: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
> 
> Add bindings for the Qualcomm MBG (Master Bandgap) temperature alarm peripheral

Feels unwrapped.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597


> found on the PM8775 PMIC. Unlike the existing SPMI temp alarm peripheral,
> the MBG peripheral supports both hot and cold threshold monitoring across
> two programmable levels (LVL1 and LVL2), with interrupt status reported via
> a fault status register over SPMI.
> 
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
> Co-developed-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
> Signed-off-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
> ---
>  .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |  4 ++
>  .../bindings/thermal/qcom-spmi-mbg-tm.yaml         | 72 ++++++++++++++++++++++
>  2 files changed, 76 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> index 644c42b5e2e5..5f409fe700b2 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> @@ -193,6 +193,10 @@ patternProperties:
>      type: object
>      $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
>  
> +  "^temperature-sensor@[0-9a-f]+$":
> +    type: object
> +    $ref: /schemas/thermal/qcom-spmi-mbg-tm.yaml#
> +
>    "^typec@[0-9a-f]+$":
>      type: object
>      $ref: /schemas/usb/qcom,pmic-typec.yaml#
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml
> new file mode 100644
> index 000000000000..a0ecc9f35cf6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml

Filename must match compatible.

> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/qcom-spmi-mbg-tm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm's SPMI PMIC MBG Thermal Monitoring

Best regards,
Krzysztof