* [PATCH v2] arm64: dts: rockchip: fix emmc reset polarity on px30-cobra
@ 2026-06-09 8:17 Jakob Unterwurzacher
2026-06-09 9:10 ` Quentin Schulz
0 siblings, 1 reply; 2+ messages in thread
From: Jakob Unterwurzacher @ 2026-06-09 8:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiko Stuebner,
Jakob Unterwurzacher, Quentin Schulz
Cc: stable, Heiko Stuebner, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel
From: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Technically, the reset signal is active low - it's called RST_n after all.
But it is ignored completely unless RST_n_FUNCTION=1 (byte 162 in extcsd)
is set in the emmc. It is 0 per default.
For emmcs that have RST_n_FUNCTION=1 we failed like this:
[ 3.074480] mmc1: Failed to initialize a non-removable card
With this change they work normally.
Cc: stable@vger.kernel.org
Fixes: bb510ddc9d3e ("arm64: dts: rockchip: add px30-cobra base dtsi and board variants")
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
---
v2: Add correct "From: " line
arch/arm64/boot/dts/rockchip/px30-cobra.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
index b7e669d8ba4d..90751b04f95c 100644
--- a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
@@ -35,7 +35,7 @@ emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>;
};
gpio-leds {
--
2.47.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] arm64: dts: rockchip: fix emmc reset polarity on px30-cobra
2026-06-09 8:17 [PATCH v2] arm64: dts: rockchip: fix emmc reset polarity on px30-cobra Jakob Unterwurzacher
@ 2026-06-09 9:10 ` Quentin Schulz
0 siblings, 0 replies; 2+ messages in thread
From: Quentin Schulz @ 2026-06-09 9:10 UTC (permalink / raw)
To: Jakob Unterwurzacher, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Heiko Stuebner, Jakob Unterwurzacher
Cc: stable, Heiko Stuebner, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel
Hi Jakob,
On 6/9/26 10:17 AM, Jakob Unterwurzacher wrote:
> From: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
>
> Technically, the reset signal is active low - it's called RST_n after all.
>
> But it is ignored completely unless RST_n_FUNCTION=1 (byte 162 in extcsd)
> is set in the emmc. It is 0 per default.
>
> For emmcs that have RST_n_FUNCTION=1 we failed like this:
>
> [ 3.074480] mmc1: Failed to initialize a non-removable card
>
> With this change they work normally.
>
> Cc: stable@vger.kernel.org
> Fixes: bb510ddc9d3e ("arm64: dts: rockchip: add px30-cobra base dtsi and board variants")
> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Please try to not forget to add tags (Reviewed-by, Acked-by, Tested-by,
...) given in earlier versions of a newer version of the patch (except
if substantial changes were made, which isn't the case here).
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Thanks!
Quentin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-06-09 9:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-09 8:17 [PATCH v2] arm64: dts: rockchip: fix emmc reset polarity on px30-cobra Jakob Unterwurzacher
2026-06-09 9:10 ` Quentin Schulz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox