[PATCH v2 0/5] Add PLL3 and LCDC_CLKD support for RZ/T2H and RZ/N2H

[PATCH v2 0/5] Add PLL3 and LCDC_CLKD support for RZ/T2H and RZ/N2H

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi all,

This series adds support for the PLL3 and LCDC_CLKD clocks on Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs. These clocks are essential
for the display pipeline, specifically feeding the LCD controller.

Key Changes:
  - PLL Reference Flexibility in  the RZ/V2H(P) CPG driver
  - MSTP Dummy-Read Mechanism
  - LCDC implementation in the RZ/T2H CPG driver.

v1->v2:
- Dropped RZ_V2H_OSC_CLK_IN_MEGA macro in favor of direct use of the
  input_fref field with a fallback.
- Updated the doc to specify the default value of input_freq when it is 0.
- Updated commit message for patch 1 and 2 to reflect the new approach.
- Dropped using table based approach in favor of direct conditional checks on the clock index.
- Added Acked-by and Reviewed-by tags
- Added new patch#4
- Switched to use the new library
- Kconfig now selects CLK_RZV2H_CPG_LIB
- Renamed CPG_PLLEN to CPG_PLL_EN_EN
- Renamed LCDCDIV to LCDC_CLKD
- Changed ctr0/1 in r9a09g077_cpg_pll3_clk_recalc_rate() to use u32

v1: https://lore.kernel.org/all/20260511191910.1945705-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

Lad Prabhakar (5):
  clk: renesas: rzv2h-cpg: Use per-SoC PLL reference frequency for
    calculations
  clk: renesas: cpg-mssr: Implement dedicated MSTP delay logic for
    RZ/T2H LCDC and RTC
  dt-bindings: clock: renesas,r9a09g077/87: Add LCDC_CLKD clock ID
  clk: renesas: rzv2h-cpg: Extract PLL calculation math into a library
  clk: renesas: r9a09g077: Add LCDC and PLL3 clock support for RZ/T2H
    display pipeline

 drivers/clk/renesas/Kconfig                   |   6 +
 drivers/clk/renesas/Makefile                  |   1 +
 drivers/clk/renesas/r9a09g077-cpg.c           | 369 +++++++++++++++++-
 drivers/clk/renesas/renesas-cpg-mssr.c        |  20 +-
 drivers/clk/renesas/rzv2h-cpg-lib.c           | 216 ++++++++++
 drivers/clk/renesas/rzv2h-cpg.c               | 186 +--------
 .../clock/renesas,r9a09g077-cpg-mssr.h        |   1 +
 .../clock/renesas,r9a09g087-cpg-mssr.h        |   1 +
 include/linux/clk/renesas.h                   |  28 ++
 9 files changed, 645 insertions(+), 183 deletions(-)
 create mode 100644 drivers/clk/renesas/rzv2h-cpg-lib.c

-- 
2.54.0

[PATCH v2 1/5] clk: renesas: rzv2h-cpg: Use per-SoC PLL reference frequency for calculations

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Introduce a per-SoC PLL reference input frequency parameter to avoid
relying on a hardcoded 24MHz constant during PLL configuration math.

Add an input_fref member to struct rzv2h_pll_limits. In the core
calculation helper rzv2h_get_pll_pars(), derive the base input clock
rate from limits->input_fref, utilizing the conditional ternary operator
to fall back to 24MHz if the struct field is left uninitialized (0), and
drop the obsolete macro RZ_V2H_OSC_CLK_IN_MEGA.

This abstraction permits the reuse of the common PLL divider logic on
newer SoC platforms like the RZ/T2H, which feature a 48 MHz PLL reference
clock input instead of the 24 MHz signal used by RZ/V2H(P), without
disrupting existing platforms.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2:
- Dropped RZ_V2H_OSC_CLK_IN_MEGA macro in favor of direct use of the
  input_fref field with a fallback.
- Updated the doc to specify the default value of input_freq when it is 0.
- Updated commit message
---
 drivers/clk/renesas/rzv2h-cpg.c | 8 ++++----
 include/linux/clk/renesas.h     | 5 +++++
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/renesas/rzv2h-cpg.c b/drivers/clk/renesas/rzv2h-cpg.c
index e271c04cee34..fff89f2bdc0b 100644
--- a/drivers/clk/renesas/rzv2h-cpg.c
+++ b/drivers/clk/renesas/rzv2h-cpg.c
@@ -218,7 +218,6 @@ struct rzv2h_plldsi_div_clk {
 #define to_plldsi_div_clk(_hw) \
 	container_of(_hw, struct rzv2h_plldsi_div_clk, hw)
 
-#define RZ_V2H_OSC_CLK_IN_MEGA		(24 * MEGA)
 #define RZV2H_MAX_DIV_TABLES		(16)
 
 /**
@@ -242,6 +241,7 @@ struct rzv2h_plldsi_div_clk {
 bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
 			struct rzv2h_pll_pars *pars, u64 freq_millihz)
 {
+	unsigned long input_fref = limits->input_fref ?: (24 * MEGA);
 	u64 fout_min_millihz = mul_u32_u32(limits->fout.min, MILLI);
 	u64 fout_max_millihz = mul_u32_u32(limits->fout.max, MILLI);
 	struct rzv2h_pll_pars p, best;
@@ -254,7 +254,7 @@ bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
 	best.error_millihz = S64_MAX;
 
 	for (p.p = limits->p.min; p.p <= limits->p.max; p.p++) {
-		u32 fref = RZ_V2H_OSC_CLK_IN_MEGA / p.p;
+		u32 fref = input_fref / p.p;
 		u16 divider;
 
 		for (divider = 1 << limits->s.min, p.s = limits->s.min;
@@ -335,9 +335,9 @@ bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
 					continue;
 
 				/* PLL_M component of (output * 65536 * PLL_P) */
-				output = mul_u32_u32(p.m * 65536, RZ_V2H_OSC_CLK_IN_MEGA);
+				output = mul_u32_u32(p.m * 65536, input_fref);
 				/* PLL_K component of (output * 65536 * PLL_P) */
-				output += p.k * RZ_V2H_OSC_CLK_IN_MEGA;
+				output += p.k * input_fref;
 				/* Make it in mHz */
 				output *= MILLI;
 				output = DIV_U64_ROUND_CLOSEST(output, 65536 * p.p * divider);
diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h
index 0949400f44de..2aeff01150c3 100644
--- a/include/linux/clk/renesas.h
+++ b/include/linux/clk/renesas.h
@@ -53,6 +53,9 @@ static inline void rzg2l_cpg_dsi_div_set_divider(u8 divider, int target) { }
  * various parameters used to configure a PLL. These limits ensure
  * the PLL operates within valid and stable ranges.
  *
+ * @input_fref: Reference input frequency to the PLL (in MHz). If set
+ * to 0, a default value of 24MHz is used.
+ *
  * @fout: Output frequency range (in MHz)
  * @fout.min: Minimum allowed output frequency
  * @fout.max: Maximum allowed output frequency
@@ -78,6 +81,8 @@ static inline void rzg2l_cpg_dsi_div_set_divider(u8 divider, int target) { }
  * @k.max: Maximum delta-sigma value
  */
 struct rzv2h_pll_limits {
+	u32 input_fref;
+
 	struct {
 		u32 min;
 		u32 max;
-- 
2.54.0

[PATCH v2 2/5] clk: renesas: cpg-mssr: Implement dedicated MSTP delay logic for RZ/T2H LCDC and RTC

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Introduce a dedicated clock delay mechanism, cpg_rzt2h_mstp_delay(), to
satisfy the module-stop (MSTP) state release requirements specified in
the RZ/T2H hardware manual.

Per the hardware manual, while a standard 10 us delay (satisfying 7 dummy
reads) is sufficient for most IP blocks, the LCDC requires 100 dummy reads
(142 us) and the RTC requires 300 dummy reads (428 us) to stabilize after
being released from a module-stop state.

Implement a conditional bitmask filter helper that switches wait
intervals based on the packaged module clock index. In
cpg_mstp_clock_endisable(), the clock index and individual target bits are
known, allowing an exact match. In the resume path cpg_mssr_resume_noirq(),
where individual bits are not tracked, pass a fallback register index base
(`reg * 32`) with bit verification masked out to match on the peripheral's
register group block instead.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2:
- Dropped using table based approach in favor of direct conditional checks on the clock index.
- Updated commit message to reflect the new approach.
---
 drivers/clk/renesas/renesas-cpg-mssr.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index 5b84cbee030b..4ed056b18d31 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -253,6 +253,22 @@ static void cpg_rzt2h_mstp_write(struct cpg_mssr_priv *priv, u16 offset, u32 val
 	writel(value, base + RZT2H_MSTPCR_OFFSET(offset));
 }
 
+static void cpg_rzt2h_mstp_delay(u32 idx, bool bit_valid)
+{
+	unsigned int mask = bit_valid ? GENMASK(31, 0) : GENMASK(31, 5);
+
+	if (idx == (MOD_CLK_PACK(1204) & mask)) {
+		/* LCDC needs 100 dummy reads, or 142us */
+		udelay(142);
+	} else if (idx == (MOD_CLK_PACK(605) & mask)) {
+		/* RTC needs 300 dummy reads, or 428us */
+		udelay(428);
+	} else {
+		/* default 7 dummy reads, or 10us */
+		udelay(10);
+	}
+}
+
 static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 {
 	struct mstp_clock *clock = to_mstp_clock(hw);
@@ -312,7 +328,7 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 		 * register, we simply add a delay after the read operation.
 		 */
 		cpg_rzt2h_mstp_read(priv, priv->control_regs[reg]);
-		udelay(10);
+		cpg_rzt2h_mstp_delay(clock->index, true);
 		return 0;
 	}
 
@@ -1142,7 +1158,7 @@ static int cpg_mssr_resume_noirq(struct device *dev)
 			cpg_rzt2h_mstp_write(priv, priv->control_regs[reg], newval);
 			/* See cpg_mstp_clock_endisable() on why this is necessary. */
 			cpg_rzt2h_mstp_read(priv, priv->control_regs[reg]);
-			udelay(10);
+			cpg_rzt2h_mstp_delay(reg * 32, false);
 			continue;
 		} else
 			writel(newval, priv->pub.base0 + priv->control_regs[reg]);
-- 
2.54.0

[PATCH v2 3/5] dt-bindings: clock: renesas,r9a09g077/87: Add LCDC_CLKD clock ID

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add the LCDC clockd (LCDC_CLKD) definition for the Renesas RZ/T2H
(R9A09G077) and RZ/N2H (R9A09G087) SoCs. LCDC_CLKD is used as the
operating clock for LCDC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v1->v2:
- Added Acked-by and Reviewed-by tags.
---
 include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h | 1 +
 include/dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h b/include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h
index c4863e444458..f6cb8d649a46 100644
--- a/include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h
+++ b/include/dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h
@@ -34,5 +34,6 @@
 #define R9A09G077_XSPI_CLK0		22
 #define R9A09G077_XSPI_CLK1		23
 #define R9A09G077_PCLKCAN		24
+#define R9A09G077_LCDC_CLKD		25
 
 #endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G077_CPG_H__ */
diff --git a/include/dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h b/include/dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h
index 0d53f1e65077..312e563b322e 100644
--- a/include/dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h
+++ b/include/dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h
@@ -34,5 +34,6 @@
 #define R9A09G087_XSPI_CLK0		22
 #define R9A09G087_XSPI_CLK1		23
 #define R9A09G087_PCLKCAN		24
+#define R9A09G087_LCDC_CLKD		25
 
 #endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G087_CPG_H__ */
-- 
2.54.0

[PATCH v2 4/5] clk: renesas: rzv2h-cpg: Extract PLL calculation math into a library

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Move the common PLL and divider parameter calculation logic from the
core rzv2h-cpg driver into a standalone library file.

Introduce the CLK_RZV2H_CPG_LIB Kconfig configuration symbol and create
rzv2h-cpg-lib.c to house rzv2h_cpg_get_pll_pars() and
rzv2h_cpg_get_pll_divs_pars().

Keep rzv2h_get_pll_pars() and rzv2h_get_pll_divs_pars() in the original
driver as wrappers that call into the new library helper endpoints.
These wrappers are maintained for this cycle because they are actively
referenced by the DSI driver; they will be safely removed in a subsequent
cycle once the DSI driver is updated to use the new APIs from the library,
preventing cross-subsystem build breakages.

This restructuring allows other Renesas SoC clock drivers, such as the
upcoming RZ/T2H and RZ/N2H platforms that utilize similar LCDC clock
divider mathematical logic, to share the iterative calculation helper
infrastructure without duplication.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2:
- New patch
---
 drivers/clk/renesas/Kconfig         |   4 +
 drivers/clk/renesas/Makefile        |   1 +
 drivers/clk/renesas/rzv2h-cpg-lib.c | 216 ++++++++++++++++++++++++++++
 drivers/clk/renesas/rzv2h-cpg.c     | 186 +-----------------------
 include/linux/clk/renesas.h         |  23 +++
 5 files changed, 250 insertions(+), 180 deletions(-)
 create mode 100644 drivers/clk/renesas/rzv2h-cpg-lib.c

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 0203ecbb3882..7659550b8566 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -260,8 +260,12 @@ config CLK_RZG2L
 
 config CLK_RZV2H
 	bool "RZ/{G3E,V2H(P)} family clock support" if COMPILE_TEST
+	select CLK_RZV2H_CPG_LIB
 	select RESET_CONTROLLER
 
+config CLK_RZV2H_CPG_LIB
+	bool "RZV2H CPG library functions" if COMPILE_TEST
+
 config CLK_RENESAS_VBATTB
 	tristate "Renesas VBATTB clock controller"
 	depends on ARCH_RZG2L || COMPILE_TEST
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index bd2bed91ab29..ac790e56034b 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_CLK_RCAR_GEN3_CPG)		+= rcar-gen3-cpg.o
 obj-$(CONFIG_CLK_RCAR_GEN4_CPG)		+= rcar-gen4-cpg.o
 obj-$(CONFIG_CLK_RCAR_USB2_CLOCK_SEL)	+= rcar-usb2-clock-sel.o
 obj-$(CONFIG_CLK_RZG2L)			+= rzg2l-cpg.o
+obj-$(CONFIG_CLK_RZV2H_CPG_LIB)		+= rzv2h-cpg-lib.o
 obj-$(CONFIG_CLK_RZV2H)			+= rzv2h-cpg.o
 
 # Generic
diff --git a/drivers/clk/renesas/rzv2h-cpg-lib.c b/drivers/clk/renesas/rzv2h-cpg-lib.c
new file mode 100644
index 000000000000..98e789df5d7f
--- /dev/null
+++ b/drivers/clk/renesas/rzv2h-cpg-lib.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RZV2H CPG Library. This library provides common functions to calculate
+ * PLL parameters for the RZV2H SoC.
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ *
+ */
+
+#include <linux/clk/renesas.h>
+#include <linux/math.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+/**
+ * rzv2h_cpg_get_pll_pars - Finds the best combination of PLL parameters
+ * for a given frequency.
+ *
+ * @limits: Pointer to the structure containing the limits for the PLL parameters
+ * @pars: Pointer to the structure where the best calculated PLL parameters values
+ * will be stored
+ * @freq_millihz: Target output frequency in millihertz
+ *
+ * This function calculates the best set of PLL parameters (M, K, P, S) to achieve
+ * the desired frequency.
+ * There is no direct formula to calculate the PLL parameters, as it's an open
+ * system of equations, therefore this function uses an iterative approach to
+ * determine the best solution. The best solution is one that minimizes the error
+ * (desired frequency - actual frequency).
+ *
+ * Return: true if a valid set of parameters values is found, false otherwise.
+ */
+bool rzv2h_cpg_get_pll_pars(const struct rzv2h_pll_limits *limits,
+			    struct rzv2h_pll_pars *pars, u64 freq_millihz)
+{
+	unsigned long input_fref = limits->input_fref ?: (24 * MEGA);
+	u64 fout_min_millihz = mul_u32_u32(limits->fout.min, MILLI);
+	u64 fout_max_millihz = mul_u32_u32(limits->fout.max, MILLI);
+	struct rzv2h_pll_pars p, best;
+
+	if (freq_millihz > fout_max_millihz ||
+	    freq_millihz < fout_min_millihz)
+		return false;
+
+	/* Initialize best error to maximum possible value */
+	best.error_millihz = S64_MAX;
+
+	for (p.p = limits->p.min; p.p <= limits->p.max; p.p++) {
+		u32 fref = input_fref / p.p;
+		u16 divider;
+
+		for (divider = 1 << limits->s.min, p.s = limits->s.min;
+			p.s <= limits->s.max; p.s++, divider <<= 1) {
+			for (p.m = limits->m.min; p.m <= limits->m.max; p.m++) {
+				u64 output_m, output_k_range;
+				s64 pll_k, output_k;
+				u64 fvco, output;
+
+				/*
+				 * The frequency generated by the PLL + divider
+				 * is calculated as follows:
+				 *
+				 * With:
+				 * Freq = Ffout = Ffvco / 2^(pll_s)
+				 * Ffvco = (pll_m + (pll_k / 65536)) * Ffref
+				 * Ffref = 24MHz / pll_p
+				 *
+				 * Freq can also be rewritten as:
+				 * Freq = Ffvco / 2^(pll_s)
+				 *      = ((pll_m + (pll_k / 65536)) * Ffref) / 2^(pll_s)
+				 *      = (pll_m * Ffref) / 2^(pll_s) + ((pll_k / 65536) * Ffref) / 2^(pll_s)
+				 *      = output_m + output_k
+				 *
+				 * Every parameter has been determined at this
+				 * point, but pll_k.
+				 *
+				 * Considering that:
+				 * limits->k.min <= pll_k <= limits->k.max
+				 * Then:
+				 * -0.5 <= (pll_k / 65536) < 0.5
+				 * Therefore:
+				 * -Ffref / (2 * 2^(pll_s)) <= output_k < Ffref / (2 * 2^(pll_s))
+				 */
+
+				/* Compute output M component (in mHz) */
+				output_m = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(p.m, fref) * MILLI,
+								 divider);
+				/* Compute range for output K (in mHz) */
+				output_k_range = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(fref, MILLI),
+								       2 * divider);
+				/*
+				 * No point in continuing if we can't achieve
+				 * the desired frequency
+				 */
+				if (freq_millihz <  (output_m - output_k_range) ||
+				    freq_millihz >= (output_m + output_k_range)) {
+					continue;
+				}
+
+				/*
+				 * Compute the K component
+				 *
+				 * Since:
+				 * Freq = output_m + output_k
+				 * Then:
+				 * output_k = Freq - output_m
+				 *          = ((pll_k / 65536) * Ffref) / 2^(pll_s)
+				 * Therefore:
+				 * pll_k = (output_k * 65536 * 2^(pll_s)) / Ffref
+				 */
+				output_k = freq_millihz - output_m;
+				pll_k = div_s64(output_k * 65536ULL * divider,
+						fref);
+				pll_k = DIV_S64_ROUND_CLOSEST(pll_k, MILLI);
+
+				/* Validate K value within allowed limits */
+				if (pll_k < limits->k.min ||
+				    pll_k > limits->k.max)
+					continue;
+
+				p.k = pll_k;
+
+				/* Compute (Ffvco * 65536) */
+				fvco = mul_u32_u32(p.m * 65536 + p.k, fref);
+				if (fvco < mul_u32_u32(limits->fvco.min, 65536) ||
+				    fvco > mul_u32_u32(limits->fvco.max, 65536))
+					continue;
+
+				/* PLL_M component of (output * 65536 * PLL_P) */
+				output = mul_u32_u32(p.m * 65536, input_fref);
+				/* PLL_K component of (output * 65536 * PLL_P) */
+				output += p.k * input_fref;
+				/* Make it in mHz */
+				output *= MILLI;
+				output = DIV_U64_ROUND_CLOSEST(output, 65536 * p.p * divider);
+
+				/* Check output frequency against limits */
+				if (output < fout_min_millihz ||
+				    output > fout_max_millihz)
+					continue;
+
+				p.error_millihz = freq_millihz - output;
+				p.freq_millihz = output;
+
+				/* If an exact match is found, return immediately */
+				if (p.error_millihz == 0) {
+					*pars = p;
+					return true;
+				}
+
+				/* Update best match if error is smaller */
+				if (abs(best.error_millihz) > abs(p.error_millihz))
+					best = p;
+			}
+		}
+	}
+
+	/* If no valid parameters were found, return false */
+	if (best.error_millihz == S64_MAX)
+		return false;
+
+	*pars = best;
+	return true;
+}
+EXPORT_SYMBOL_NS_GPL(rzv2h_cpg_get_pll_pars, "RZV2H_CPG");
+
+/*
+ * rzv2h_cpg_get_pll_divs_pars - Finds the best combination of PLL parameters
+ * and divider value for a given frequency.
+ *
+ * @limits: Pointer to the structure containing the limits for the PLL parameters
+ * @pars: Pointer to the structure where the best calculated PLL parameters and
+ * divider values will be stored
+ * @table: Pointer to the array of valid divider values
+ * @table_size: Size of the divider values array
+ * @freq_millihz: Target output frequency in millihertz
+ *
+ * This function calculates the best set of PLL parameters (M, K, P, S) and divider
+ * value to achieve the desired frequency. See rzv2h_cpg_get_pll_pars() for more
+ * details on how the PLL parameters are calculated.
+ *
+ * freq_millihz is the desired frequency generated by the PLL followed by a
+ * a gear.
+ */
+bool rzv2h_cpg_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+				 struct rzv2h_pll_div_pars *pars,
+				 const u8 *table, u8 table_size, u64 freq_millihz)
+{
+	struct rzv2h_pll_div_pars p, best;
+
+	best.div.error_millihz = S64_MAX;
+	p.div.error_millihz = S64_MAX;
+	for (unsigned int i = 0; i < table_size; i++) {
+		if (!rzv2h_cpg_get_pll_pars(limits, &p.pll, freq_millihz * table[i]))
+			continue;
+
+		p.div.divider_value = table[i];
+		p.div.freq_millihz = DIV_U64_ROUND_CLOSEST(p.pll.freq_millihz, table[i]);
+		p.div.error_millihz = freq_millihz - p.div.freq_millihz;
+
+		if (p.div.error_millihz == 0) {
+			*pars = p;
+			return true;
+		}
+
+		if (abs(best.div.error_millihz) > abs(p.div.error_millihz))
+			best = p;
+	}
+
+	if (best.div.error_millihz == S64_MAX)
+		return false;
+
+	*pars = best;
+	return true;
+}
+EXPORT_SYMBOL_NS_GPL(rzv2h_cpg_get_pll_divs_pars, "RZV2H_CPG");
diff --git a/drivers/clk/renesas/rzv2h-cpg.c b/drivers/clk/renesas/rzv2h-cpg.c
index fff89f2bdc0b..c2f018e27521 100644
--- a/drivers/clk/renesas/rzv2h-cpg.c
+++ b/drivers/clk/renesas/rzv2h-cpg.c
@@ -224,151 +224,13 @@ struct rzv2h_plldsi_div_clk {
  * rzv2h_get_pll_pars - Finds the best combination of PLL parameters
  * for a given frequency.
  *
- * @limits: Pointer to the structure containing the limits for the PLL parameters
- * @pars: Pointer to the structure where the best calculated PLL parameters values
- * will be stored
- * @freq_millihz: Target output frequency in millihertz
- *
- * This function calculates the best set of PLL parameters (M, K, P, S) to achieve
- * the desired frequency.
- * There is no direct formula to calculate the PLL parameters, as it's an open
- * system of equations, therefore this function uses an iterative approach to
- * determine the best solution. The best solution is one that minimizes the error
- * (desired frequency - actual frequency).
- *
- * Return: true if a valid set of parameters values is found, false otherwise.
+ * Refer to rzv2h_cpg_get_pll_pars() for more details on how the PLL
+ * parameters are calculated.
  */
 bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
 			struct rzv2h_pll_pars *pars, u64 freq_millihz)
 {
-	unsigned long input_fref = limits->input_fref ?: (24 * MEGA);
-	u64 fout_min_millihz = mul_u32_u32(limits->fout.min, MILLI);
-	u64 fout_max_millihz = mul_u32_u32(limits->fout.max, MILLI);
-	struct rzv2h_pll_pars p, best;
-
-	if (freq_millihz > fout_max_millihz ||
-	    freq_millihz < fout_min_millihz)
-		return false;
-
-	/* Initialize best error to maximum possible value */
-	best.error_millihz = S64_MAX;
-
-	for (p.p = limits->p.min; p.p <= limits->p.max; p.p++) {
-		u32 fref = input_fref / p.p;
-		u16 divider;
-
-		for (divider = 1 << limits->s.min, p.s = limits->s.min;
-			p.s <= limits->s.max; p.s++, divider <<= 1) {
-			for (p.m = limits->m.min; p.m <= limits->m.max; p.m++) {
-				u64 output_m, output_k_range;
-				s64 pll_k, output_k;
-				u64 fvco, output;
-
-				/*
-				 * The frequency generated by the PLL + divider
-				 * is calculated as follows:
-				 *
-				 * With:
-				 * Freq = Ffout = Ffvco / 2^(pll_s)
-				 * Ffvco = (pll_m + (pll_k / 65536)) * Ffref
-				 * Ffref = 24MHz / pll_p
-				 *
-				 * Freq can also be rewritten as:
-				 * Freq = Ffvco / 2^(pll_s)
-				 *      = ((pll_m + (pll_k / 65536)) * Ffref) / 2^(pll_s)
-				 *      = (pll_m * Ffref) / 2^(pll_s) + ((pll_k / 65536) * Ffref) / 2^(pll_s)
-				 *      = output_m + output_k
-				 *
-				 * Every parameter has been determined at this
-				 * point, but pll_k.
-				 *
-				 * Considering that:
-				 * limits->k.min <= pll_k <= limits->k.max
-				 * Then:
-				 * -0.5 <= (pll_k / 65536) < 0.5
-				 * Therefore:
-				 * -Ffref / (2 * 2^(pll_s)) <= output_k < Ffref / (2 * 2^(pll_s))
-				 */
-
-				/* Compute output M component (in mHz) */
-				output_m = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(p.m, fref) * MILLI,
-								 divider);
-				/* Compute range for output K (in mHz) */
-				output_k_range = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(fref, MILLI),
-								       2 * divider);
-				/*
-				 * No point in continuing if we can't achieve
-				 * the desired frequency
-				 */
-				if (freq_millihz <  (output_m - output_k_range) ||
-				    freq_millihz >= (output_m + output_k_range)) {
-					continue;
-				}
-
-				/*
-				 * Compute the K component
-				 *
-				 * Since:
-				 * Freq = output_m + output_k
-				 * Then:
-				 * output_k = Freq - output_m
-				 *          = ((pll_k / 65536) * Ffref) / 2^(pll_s)
-				 * Therefore:
-				 * pll_k = (output_k * 65536 * 2^(pll_s)) / Ffref
-				 */
-				output_k = freq_millihz - output_m;
-				pll_k = div_s64(output_k * 65536ULL * divider,
-						fref);
-				pll_k = DIV_S64_ROUND_CLOSEST(pll_k, MILLI);
-
-				/* Validate K value within allowed limits */
-				if (pll_k < limits->k.min ||
-				    pll_k > limits->k.max)
-					continue;
-
-				p.k = pll_k;
-
-				/* Compute (Ffvco * 65536) */
-				fvco = mul_u32_u32(p.m * 65536 + p.k, fref);
-				if (fvco < mul_u32_u32(limits->fvco.min, 65536) ||
-				    fvco > mul_u32_u32(limits->fvco.max, 65536))
-					continue;
-
-				/* PLL_M component of (output * 65536 * PLL_P) */
-				output = mul_u32_u32(p.m * 65536, input_fref);
-				/* PLL_K component of (output * 65536 * PLL_P) */
-				output += p.k * input_fref;
-				/* Make it in mHz */
-				output *= MILLI;
-				output = DIV_U64_ROUND_CLOSEST(output, 65536 * p.p * divider);
-
-				/* Check output frequency against limits */
-				if (output < fout_min_millihz ||
-				    output > fout_max_millihz)
-					continue;
-
-				p.error_millihz = freq_millihz - output;
-				p.freq_millihz = output;
-
-				/* If an exact match is found, return immediately */
-				if (p.error_millihz == 0) {
-					*pars = p;
-					return true;
-				}
-
-				/* Update best match if error is smaller */
-				if (abs(best.error_millihz) > abs(p.error_millihz))
-					best = p;
-			}
-		}
-	}
-
-	/* If no valid parameters were found, return false */
-	if (best.error_millihz == S64_MAX)
-		return false;
-
-	*pars = best;
-	return true;
+	return rzv2h_cpg_get_pll_pars(limits, pars, freq_millihz);
 }
 EXPORT_SYMBOL_NS_GPL(rzv2h_get_pll_pars, "RZV2H_CPG");
 
@@ -376,50 +238,14 @@ EXPORT_SYMBOL_NS_GPL(rzv2h_get_pll_pars, "RZV2H_CPG");
  * rzv2h_get_pll_divs_pars - Finds the best combination of PLL parameters
  * and divider value for a given frequency.
  *
- * @limits: Pointer to the structure containing the limits for the PLL parameters
- * @pars: Pointer to the structure where the best calculated PLL parameters and
- * divider values will be stored
- * @table: Pointer to the array of valid divider values
- * @table_size: Size of the divider values array
- * @freq_millihz: Target output frequency in millihertz
- *
- * This function calculates the best set of PLL parameters (M, K, P, S) and divider
- * value to achieve the desired frequency. See rzv2h_get_pll_pars() for more details
- * on how the PLL parameters are calculated.
- *
- * freq_millihz is the desired frequency generated by the PLL followed by a
- * a gear.
+ * Refer to rzv2h_cpg_get_pll_divs_pars() for more details on how the PLL
+ * parameters and divider value are calculated.
  */
 bool rzv2h_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
 			     struct rzv2h_pll_div_pars *pars,
 			     const u8 *table, u8 table_size, u64 freq_millihz)
 {
-	struct rzv2h_pll_div_pars p, best;
-
-	best.div.error_millihz = S64_MAX;
-	p.div.error_millihz = S64_MAX;
-	for (unsigned int i = 0; i < table_size; i++) {
-		if (!rzv2h_get_pll_pars(limits, &p.pll, freq_millihz * table[i]))
-			continue;
-
-		p.div.divider_value = table[i];
-		p.div.freq_millihz = DIV_U64_ROUND_CLOSEST(p.pll.freq_millihz, table[i]);
-		p.div.error_millihz = freq_millihz - p.div.freq_millihz;
-
-		if (p.div.error_millihz == 0) {
-			*pars = p;
-			return true;
-		}
-
-		if (abs(best.div.error_millihz) > abs(p.div.error_millihz))
-			best = p;
-	}
-
-	if (best.div.error_millihz == S64_MAX)
-		return false;
-
-	*pars = best;
-	return true;
+	return rzv2h_cpg_get_pll_divs_pars(limits, pars, table, table_size, freq_millihz);
 }
 EXPORT_SYMBOL_NS_GPL(rzv2h_get_pll_divs_pars, "RZV2H_CPG");
 
diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h
index 2aeff01150c3..98d9ab38e027 100644
--- a/include/linux/clk/renesas.h
+++ b/include/linux/clk/renesas.h
@@ -213,4 +213,27 @@ static inline bool rzv2h_get_pll_divs_pars(const struct rzv2h_pll_limits *limits
 }
 #endif
 
+#ifdef CONFIG_CLK_RZV2H_CPG_LIB
+bool rzv2h_cpg_get_pll_pars(const struct rzv2h_pll_limits *limits,
+			    struct rzv2h_pll_pars *pars, u64 freq_millihz);
+
+bool rzv2h_cpg_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+				 struct rzv2h_pll_div_pars *pars,
+				 const u8 *table, u8 table_size, u64 freq_millihz);
+#else
+static inline bool rzv2h_cpg_get_pll_pars(const struct rzv2h_pll_limits *limits,
+					  struct rzv2h_pll_pars *pars,
+					  u64 freq_millihz)
+{
+	return false;
+}
+
+static inline bool rzv2h_cpg_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+					       struct rzv2h_pll_div_pars *pars,
+					       const u8 *table, u8 table_size,
+					       u64 freq_millihz)
+{
+	return false;
+}
+#endif
 #endif
-- 
2.54.0

[PATCH v2 5/5] clk: renesas: r9a09g077: Add LCDC and PLL3 clock support for RZ/T2H display pipeline

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add the clock definitions and PLL logic required to supply the LCDC
(VSPD/FCPVD/DU) blocks on the RZ/T2H (R9A09G077) SoC. The RZ/T2H display
subsystem depends on a dedicated PLL (PLL3) and a set of new derived
clocks.

Introduce a new PLL clock type and implement rate recalculation,
programming and locking sequences for PLL3 using the RZ/T2H specific
divider and VCO limits. Add the corresponding muxes and divider entries,
expose the LCDC core clock, and register the LCDC module clock using the
correct PCLK parent.

This enables the RZ/T2H clock driver to generate the display pipeline
clocking tree needed by the DU and VSP-based composition engines, allowing
upcoming display support to be integrated without duplicating CPG logic.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2:
- Switched to use the new library
- Kconfig now selects CLK_RZV2H_CPG_LIB
- Renamed CPG_PLLEN to CPG_PLL_EN_EN
- Renamed LCDCDIV to LCDC_CLKD
- Changed ctr0/1 in r9a09g077_cpg_pll3_clk_recalc_rate() to use u32
---
 drivers/clk/renesas/Kconfig         |   2 +
 drivers/clk/renesas/r9a09g077-cpg.c | 369 +++++++++++++++++++++++++++-
 2 files changed, 370 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 7659550b8566..5c0238e878b7 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -218,10 +218,12 @@ config CLK_R9A09G057
 config CLK_R9A09G077
 	bool "RZ/T2H clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSSR
+	select CLK_RZV2H_CPG_LIB
 
 config CLK_R9A09G087
 	bool "RZ/N2H clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSSR
+	select CLK_RZV2H_CPG_LIB
 
 config CLK_SH73A0
 	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
diff --git a/drivers/clk/renesas/r9a09g077-cpg.c b/drivers/clk/renesas/r9a09g077-cpg.c
index f777601a23b9..975578efd4cf 100644
--- a/drivers/clk/renesas/r9a09g077-cpg.c
+++ b/drivers/clk/renesas/r9a09g077-cpg.c
@@ -8,16 +8,23 @@
 
 #include <linux/bitfield.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/renesas.h>
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/math.h>
+#include <linux/module.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 #include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
 #include <dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h>
 #include "renesas-cpg-mssr.h"
 
+MODULE_IMPORT_NS("RZV2H_CPG");
+
 #define RZT2H_REG_BLOCK_SHIFT	11
 #define RZT2H_REG_OFFSET_MASK	GENMASK(10, 0)
 #define RZT2H_REG_CONF(block, offset)	(((block) << RZT2H_REG_BLOCK_SHIFT) | \
@@ -66,11 +73,26 @@
 #define DIVSCI2ASYNC	CONF_PACK(SCKCR3, 10, 2)
 #define DIVSCI3ASYNC	CONF_PACK(SCKCR3, 12, 2)
 #define DIVSCI4ASYNC	CONF_PACK(SCKCR3, 14, 2)
+#define LCDCDIVSEL	CONF_PACK(SCKCR3, 20, 4)
+
+#define PLL3EN		FIELD_PREP_CONST(OFFSET_MASK, (0xc0))
+
+#define CPG_PLL_EN_EN		BIT(0)
+#define CPG_PLL3_VCO_CTR0(x)	((x) + 0x4)
+#define CPG_PLL3_VCO_CTR0_PDIV	GENMASK(21, 16)
+#define CPG_PLL3_VCO_CTR0_MDIV	GENMASK(9, 0)
+#define CPG_PLL3_VCO_CTR1(x)	((x) + 0x8)
+#define CPG_PLL3_VCO_CTR1_KDIV	GENMASK(31, 16)
+#define CPG_PLL3_VCO_CTR1_SDIV	GENMASK(2, 0)
+#define CPG_PLL_MON(x)		((x) - 0x10)
+#define CPG_PLL_MON_LOCK	BIT(0)
 
 enum rzt2h_clk_types {
 	CLK_TYPE_RZT2H_DIV = CLK_TYPE_CUSTOM,	/* Clock with divider */
 	CLK_TYPE_RZT2H_MUX,			/* Clock with clock source selector */
 	CLK_TYPE_RZT2H_FSELXSPI,		/* Clock with FSELXSPIn source selector */
+	CLK_TYPE_RZT2H_PLL3,			/* PLL3 Clock */
+	CLK_TYPE_RZT2H_LCDCDIV,			/* LCDC divider clock */
 };
 
 #define DEF_DIV(_name, _id, _parent, _conf, _dtable) \
@@ -83,10 +105,51 @@ enum rzt2h_clk_types {
 #define DEF_DIV_FSELXSPI(_name, _id, _parent, _conf, _dtable) \
 	DEF_TYPE(_name, _id, CLK_TYPE_RZT2H_FSELXSPI, .conf = _conf, \
 		 .parent = _parent, .dtable = _dtable, .flag = 0)
+#define DEF_PLL3(_name, _id, _parent, _conf) \
+	DEF_TYPE(_name, _id, CLK_TYPE_RZT2H_PLL3, .conf = _conf, \
+		 .parent = _parent)
+#define DEF_DIV_LCDC(_name, _id, _parent, _conf, _dtable) \
+	DEF_TYPE(_name, _id, CLK_TYPE_RZT2H_LCDCDIV, .conf = _conf, \
+		 .parent = _parent, .dtable = _dtable, .flag = CLK_SET_RATE_PARENT)
+
+struct pll_clk {
+	void __iomem *reg;
+	const struct rzv2h_pll_limits *limits;
+	struct device *dev;
+	struct rzv2h_pll_pars pll_parameters;
+	struct clk_hw hw;
+	unsigned long cur_rate;
+};
+
+#define to_pll(_hw)	container_of(_hw, struct pll_clk, hw)
+
+struct r9a09g077_lcdc_div_clk {
+	const struct clk_div_table *dtable;
+	void __iomem *reg;
+	struct device *dev;
+	struct clk_hw hw;
+	u32 conf;
+	u8 divider;
+};
+
+#define to_lcdc_div_clk(_hw) \
+	container_of(_hw, struct r9a09g077_lcdc_div_clk, hw)
+
+#define RZT2H_MAX_LCDC_DIV_TABLES	16
+
+static const struct rzv2h_pll_limits r9a09g077_cpg_pll3_limits = {
+	.input_fref = 48 * MEGA,
+	.fout = { .min = 25 * MEGA, .max = 430 * MEGA },
+	.fvco = { .min = 1600 * MEGA, .max = 3200 * MEGA },
+	.m = { .min = 0x40, .max = 0x3ff },
+	.p = { .min = 0x2, .max = 0x8 },
+	.s = { .min = 0x0, .max = 0x6 },
+	.k = { .min = -32768, .max = 32767 },
+};
 
 enum clk_ids {
 	/* Core Clock Outputs exported to DT */
-	LAST_DT_CORE_CLK = R9A09G077_PCLKCAN,
+	LAST_DT_CORE_CLK = R9A09G077_LCDC_CLKD,
 
 	/* External Input Clocks */
 	CLK_EXTAL,
@@ -96,10 +159,12 @@ enum clk_ids {
 	CLK_PLL0,
 	CLK_PLL1,
 	CLK_PLL2,
+	CLK_PLL3,
 	CLK_PLL4,
 	CLK_SEL_CLK_PLL0,
 	CLK_SEL_CLK_PLL1,
 	CLK_SEL_CLK_PLL2,
+	CLK_SEL_CLK_PLL3,
 	CLK_SEL_CLK_PLL4,
 	CLK_PLL4D1,
 	CLK_PLL4D1_DIV3,
@@ -107,6 +172,7 @@ enum clk_ids {
 	CLK_PLL4D3,
 	CLK_PLL4D3_DIV10,
 	CLK_PLL4D3_DIV20,
+	CLK_PLL4D50,
 	CLK_SCI0ASYNC,
 	CLK_SCI1ASYNC,
 	CLK_SCI2ASYNC,
@@ -119,6 +185,7 @@ enum clk_ids {
 	CLK_SPI3ASYNC,
 	CLK_DIVSELXSPI0_SCKCR,
 	CLK_DIVSELXSPI1_SCKCR,
+	CLK_LCDDIVSEL,
 
 	/* Module Clocks */
 	MOD_CLK_BASE,
@@ -130,6 +197,26 @@ static const struct clk_div_table dtable_1_2[] = {
 	{0, 0},
 };
 
+static const struct clk_div_table dtable_2_32[] = {
+	{0, 2},
+	{1, 4},
+	{2, 6},
+	{3, 8},
+	{4, 10},
+	{5, 12},
+	{6, 14},
+	{7, 16},
+	{8, 18},
+	{9, 20},
+	{10, 22},
+	{11, 24},
+	{12, 26},
+	{13, 28},
+	{14, 30},
+	{15, 32},
+	{0, 0},
+};
+
 static const struct clk_div_table dtable_6_8_16_32_64[] = {
 	{6, 64},
 	{5, 32},
@@ -152,6 +239,7 @@ static const struct clk_div_table dtable_24_25_30_32[] = {
 static const char * const sel_clk_pll0[] = { ".loco", ".pll0" };
 static const char * const sel_clk_pll1[] = { ".loco", ".pll1" };
 static const char * const sel_clk_pll2[] = { ".loco", ".pll2" };
+static const char * const sel_clk_pll3[] = { ".loco", ".pll3" };
 static const char * const sel_clk_pll4[] = { ".loco", ".pll4" };
 static const char * const sel_clk_pll4d1_div3_div4[] = { ".pll4d1_div3", ".pll4d1_div4" };
 static const char * const sel_clk_pll4d3_div10_div20[] = { ".pll4d3_div10", ".pll4d3_div20" };
@@ -173,10 +261,14 @@ static const struct cpg_core_clk r9a09g077_core_clks[] __initconst = {
 		sel_clk_pll1, ARRAY_SIZE(sel_clk_pll1), CLK_MUX_READ_ONLY),
 	DEF_MUX(".sel_clk_pll2", CLK_SEL_CLK_PLL2, SEL_PLL,
 		sel_clk_pll2, ARRAY_SIZE(sel_clk_pll2), CLK_MUX_READ_ONLY),
+	DEF_MUX(".sel_clk_pll3", CLK_SEL_CLK_PLL3, SEL_PLL,
+		sel_clk_pll3, ARRAY_SIZE(sel_clk_pll3), CLK_MUX_READ_ONLY),
 	DEF_MUX(".sel_clk_pll4", CLK_SEL_CLK_PLL4, SEL_PLL,
 		sel_clk_pll4, ARRAY_SIZE(sel_clk_pll4), CLK_MUX_READ_ONLY),
 
 	DEF_FIXED(".pll4d1", CLK_PLL4D1, CLK_SEL_CLK_PLL4, 1, 1),
+	DEF_FIXED(".pll4d50", CLK_PLL4D50, CLK_SEL_CLK_PLL4, 50, 1),
+	DEF_PLL3(".pll3", CLK_PLL3, CLK_PLL4D50, PLL3EN),
 	DEF_FIXED(".pll4d1_div3", CLK_PLL4D1_DIV3, CLK_PLL4D1, 3, 1),
 	DEF_FIXED(".pll4d1_div4", CLK_PLL4D1_DIV4, CLK_PLL4D1, 4, 1),
 	DEF_FIXED(".pll4d3", CLK_PLL4D3, CLK_SEL_CLK_PLL4, 3, 1),
@@ -229,6 +321,7 @@ static const struct cpg_core_clk r9a09g077_core_clks[] __initconst = {
 	DEF_FIXED("PCLKL", R9A09G077_CLK_PCLKL, CLK_SEL_CLK_PLL1, 16, 1),
 	DEF_FIXED("PCLKAH", R9A09G077_CLK_PCLKAH, CLK_PLL4D1, 6, 1),
 	DEF_FIXED("PCLKAM", R9A09G077_CLK_PCLKAM, CLK_PLL4D1, 12, 1),
+	DEF_FIXED("PCLKAL", R9A09G077_CLK_PCLKAL, CLK_PLL4D1, 24, 1),
 	DEF_FIXED("SDHI_CLKHS", R9A09G077_SDHI_CLKHS, CLK_SEL_CLK_PLL2, 1, 1),
 	DEF_FIXED("USB_CLK", R9A09G077_USB_CLK, CLK_PLL4D1, 48, 1),
 	DEF_FIXED("ETCLKA", R9A09G077_ETCLKA, CLK_SEL_CLK_PLL1, 5, 1),
@@ -242,6 +335,8 @@ static const struct cpg_core_clk r9a09g077_core_clks[] __initconst = {
 			 FSELXSPI1, dtable_6_8_16_32_64),
 	DEF_MUX("PCLKCAN", R9A09G077_PCLKCAN, FSELCANFD,
 		sel_clk_pll4d3_div10_div20, ARRAY_SIZE(sel_clk_pll4d3_div10_div20), 0),
+	DEF_DIV_LCDC("LCDC_CLKD", R9A09G077_LCDC_CLKD, CLK_SEL_CLK_PLL3, LCDCDIVSEL,
+		     dtable_2_32),
 };
 
 static const struct mssr_mod_clk r9a09g077_mod_clks[] __initconst = {
@@ -272,6 +367,7 @@ static const struct mssr_mod_clk r9a09g077_mod_clks[] __initconst = {
 	DEF_MOD("sci5fck", 600, CLK_SCI5ASYNC),
 	DEF_MOD("iic2", 601, R9A09G077_CLK_PCLKL),
 	DEF_MOD("spi3", 602, CLK_SPI3ASYNC),
+	DEF_MOD("lcdc", 1204, R9A09G077_CLK_PCLKAL),
 	DEF_MOD("sdhi0", 1212, R9A09G077_CLK_PCLKAM),
 	DEF_MOD("sdhi1", 1213, R9A09G077_CLK_PCLKAM),
 };
@@ -481,6 +577,272 @@ r9a09g077_cpg_fselxspi_div_clk_register(struct device *dev,
 	return hw->clk;
 }
 
+static unsigned long r9a09g077_cpg_pll3_clk_recalc_rate(struct clk_hw *hw,
+							unsigned long parent_rate)
+{
+	struct pll_clk *pll_clk = to_pll(hw);
+	u32 ctr0, ctr1;
+	u8 pdiv, sdiv;
+	u64 rate;
+	u16 mdiv;
+	s16 kdiv;
+
+	ctr0 = readl(CPG_PLL3_VCO_CTR0(pll_clk->reg));
+	ctr1 = readl(CPG_PLL3_VCO_CTR1(pll_clk->reg));
+
+	pdiv = FIELD_GET(CPG_PLL3_VCO_CTR0_PDIV, ctr0);
+	mdiv = FIELD_GET(CPG_PLL3_VCO_CTR0_MDIV, ctr0);
+	kdiv = (s16)FIELD_GET(CPG_PLL3_VCO_CTR1_KDIV, ctr1);
+	sdiv = FIELD_GET(CPG_PLL3_VCO_CTR1_SDIV, ctr1);
+
+	rate = mul_u64_u32_shr(parent_rate, (mdiv << 16) + kdiv, 16 + sdiv);
+
+	return DIV_ROUND_CLOSEST_ULL(rate, pdiv);
+}
+
+static int r9a09g077_cpg_pll3_determine_rate(struct clk_hw *hw,
+					     struct clk_rate_request *req)
+{
+	struct pll_clk *pll_clk = to_pll(hw);
+	u64 rate_millihz;
+
+	if (req->rate == pll_clk->cur_rate)
+		return 0;
+
+	rate_millihz = mul_u32_u32(req->rate, MILLI);
+	if (!rzv2h_cpg_get_pll_pars(pll_clk->limits, &pll_clk->pll_parameters,
+				    rate_millihz)) {
+		dev_dbg(pll_clk->dev,
+			"failed to determine rate for req->rate: %lu\n",
+			req->rate);
+		return -EINVAL;
+	}
+	req->rate = DIV_ROUND_CLOSEST_ULL(pll_clk->pll_parameters.freq_millihz, MILLI);
+	pll_clk->cur_rate = req->rate;
+
+	return 0;
+}
+
+static int r9a09g077_cpg_pll3_set_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long parent_rate)
+{
+	struct pll_clk *pll_clk = to_pll(hw);
+	struct rzv2h_pll_pars *params = &pll_clk->pll_parameters;
+	void __iomem *offset = pll_clk->reg;
+	u32 val;
+	int ret;
+
+	/* Put PLL into standby mode */
+	writel(0, offset);
+	ret = readl_poll_timeout_atomic(CPG_PLL_MON(offset),
+					val, !(val & CPG_PLL_MON_LOCK),
+					100, 2000);
+	if (ret) {
+		dev_err(pll_clk->dev, "Failed to put PLL into standby mode");
+		return ret;
+	}
+
+	/* Output clock setting 1 */
+	val = readl(CPG_PLL3_VCO_CTR0(offset));
+	FIELD_MODIFY(CPG_PLL3_VCO_CTR0_MDIV, &val, params->m);
+	FIELD_MODIFY(CPG_PLL3_VCO_CTR0_PDIV, &val, params->p);
+	writel(val, CPG_PLL3_VCO_CTR0(offset));
+
+	/* Output clock setting 2 */
+	val = readl(CPG_PLL3_VCO_CTR1(offset));
+	FIELD_MODIFY(CPG_PLL3_VCO_CTR1_KDIV, &val, params->k);
+	FIELD_MODIFY(CPG_PLL3_VCO_CTR1_SDIV, &val, params->s);
+	writel(val, CPG_PLL3_VCO_CTR1(offset));
+
+	writel(CPG_PLL_EN_EN, offset);
+
+	/* PLL normal mode transition, output clock stability check */
+	ret = readl_poll_timeout_atomic(CPG_PLL_MON(offset),
+					val, (val & CPG_PLL_MON_LOCK),
+					100, 2000);
+	if (ret) {
+		writel(0, offset);
+		dev_err(pll_clk->dev, "Failed to put PLL into normal mode");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct clk_ops r9a09g077_cpg_pll3_ops = {
+	.recalc_rate = r9a09g077_cpg_pll3_clk_recalc_rate,
+	.determine_rate = r9a09g077_cpg_pll3_determine_rate,
+	.set_rate = r9a09g077_cpg_pll3_set_rate,
+};
+
+static struct clk * __init
+r9a09g077_cpg_pll3_clk_register(struct device *dev,
+				const struct cpg_core_clk *core,
+				void __iomem *addr,
+				struct cpg_mssr_pub *pub,
+				const struct rzv2h_pll_limits *limits)
+{
+	struct clk_init_data init = {};
+	const struct clk *parent;
+	const char *parent_name;
+	struct pll_clk *pll_clk;
+	int ret;
+
+	parent = pub->clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk)
+		return ERR_PTR(-ENOMEM);
+
+	parent_name = __clk_get_name(parent);
+	init.name = core->name;
+	init.ops = &r9a09g077_cpg_pll3_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll_clk->dev = dev;
+	pll_clk->hw.init = &init;
+	pll_clk->reg = addr;
+	pll_clk->limits = limits;
+
+	ret = devm_clk_hw_register(dev, &pll_clk->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return pll_clk->hw.clk;
+}
+
+static int r9a09g077_cpg_lcdc_div_determine_rate(struct clk_hw *hw,
+						 struct clk_rate_request *req)
+{
+	struct r9a09g077_lcdc_div_clk *dsi_div = to_lcdc_div_clk(hw);
+	struct pll_clk *pll_clk = to_pll(clk_hw_get_parent(clk_hw_get_parent(hw)));
+	u8 table[RZT2H_MAX_LCDC_DIV_TABLES] = { 0 };
+	struct rzv2h_pll_div_pars dsi_params;
+	const struct clk_div_table *div;
+	unsigned int i = 0;
+	u64 freq_millihz;
+
+	for (div = dsi_div->dtable; div->div; div++) {
+		if (i >= RZT2H_MAX_LCDC_DIV_TABLES)
+			return -EINVAL;
+		table[i++] = div->div;
+	}
+
+	freq_millihz = mul_u32_u32(req->rate, MILLI);
+
+	if (!rzv2h_cpg_get_pll_divs_pars(pll_clk->limits, &dsi_params, table,
+					 i, freq_millihz)) {
+		dev_err(dsi_div->dev,
+			"LCDC divider failed to determine rate for req->rate: %lu\n",
+			req->rate);
+		return -EINVAL;
+	}
+
+	req->rate = DIV_ROUND_CLOSEST_ULL(dsi_params.div.freq_millihz, MILLI);
+	req->best_parent_rate = req->rate * dsi_params.div.divider_value;
+	dsi_div->divider = dsi_params.div.divider_value;
+	pll_clk->cur_rate = req->best_parent_rate;
+	pll_clk->pll_parameters = dsi_params.pll;
+
+	return 0;
+}
+
+static int r9a09g077_cpg_lcdc_div_set_rate(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long parent_rate)
+{
+	struct r9a09g077_lcdc_div_clk *dsi_div = to_lcdc_div_clk(hw);
+	const struct clk_div_table *clkt;
+	bool divider_found = false;
+	u32 val, shift;
+
+	for (clkt = dsi_div->dtable; clkt->div; clkt++) {
+		if (clkt->div == dsi_div->divider) {
+			divider_found = true;
+			break;
+		}
+	}
+
+	if (!divider_found)
+		return -EINVAL;
+
+	shift = GET_SHIFT(dsi_div->conf);
+	val = readl(dsi_div->reg);
+	val &= ~(clk_div_mask(GET_WIDTH(dsi_div->conf)) << shift);
+	val |= clkt->val << shift;
+	writel(val, dsi_div->reg);
+
+	return 0;
+}
+
+static unsigned long
+r9a09g077_cpg_lcdc_div_recalc_rate(struct clk_hw *hw,
+				   unsigned long parent_rate)
+{
+	struct r9a09g077_lcdc_div_clk *dsi_div = to_lcdc_div_clk(hw);
+	u32 div;
+
+	div = readl(dsi_div->reg);
+	div >>= GET_SHIFT(dsi_div->conf);
+	div &= clk_div_mask(GET_WIDTH(dsi_div->conf));
+	div = dsi_div->dtable[div].div;
+
+	return DIV_ROUND_CLOSEST_ULL(parent_rate, div);
+}
+
+static const struct clk_ops r9a09g077_cpg_lcdc_div_ops = {
+	.recalc_rate = r9a09g077_cpg_lcdc_div_recalc_rate,
+	.determine_rate = r9a09g077_cpg_lcdc_div_determine_rate,
+	.set_rate = r9a09g077_cpg_lcdc_div_set_rate,
+};
+
+static struct clk * __init
+r9a09g077_cpg_lcdc_div_clk_register(struct device *dev,
+				    const struct cpg_core_clk *core,
+				    void __iomem *addr,
+				    struct cpg_mssr_pub *pub)
+{
+	struct r9a09g077_lcdc_div_clk *clk_hw_data;
+	struct clk **clks = pub->clks;
+	struct clk_init_data init;
+	const struct clk *parent;
+	const char *parent_name;
+	struct clk_hw *hw;
+	int ret;
+
+	parent = clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	clk_hw_data = devm_kzalloc(dev, sizeof(*clk_hw_data), GFP_KERNEL);
+	if (!clk_hw_data)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw_data->dtable = core->dtable;
+	clk_hw_data->reg = addr;
+	clk_hw_data->conf = core->conf;
+	clk_hw_data->dev = dev;
+	clk_hw_data->divider = 32; /* Initialize divider for LCDC */
+
+	parent_name = __clk_get_name(parent);
+	init.name = core->name;
+	init.ops = &r9a09g077_cpg_lcdc_div_ops;
+	init.flags = core->flag;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	hw = &clk_hw_data->hw;
+	hw->init = &init;
+	ret = devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return hw->clk;
+}
+
 static struct clk * __init
 r9a09g077_cpg_clk_register(struct device *dev, const struct cpg_core_clk *core,
 			   const struct cpg_mssr_info *info,
@@ -497,6 +859,11 @@ r9a09g077_cpg_clk_register(struct device *dev, const struct cpg_core_clk *core,
 		return r9a09g077_cpg_mux_clk_register(dev, core, addr, pub);
 	case CLK_TYPE_RZT2H_FSELXSPI:
 		return r9a09g077_cpg_fselxspi_div_clk_register(dev, core, addr, pub);
+	case CLK_TYPE_RZT2H_PLL3:
+		return r9a09g077_cpg_pll3_clk_register(dev, core, pub->base1 + offset,
+						       pub, &r9a09g077_cpg_pll3_limits);
+	case CLK_TYPE_RZT2H_LCDCDIV:
+		return r9a09g077_cpg_lcdc_div_clk_register(dev, core, addr, pub);
 	default:
 		return ERR_PTR(-EINVAL);
 	}
-- 
2.54.0

Re: [PATCH v2 4/5] clk: renesas: rzv2h-cpg: Extract PLL calculation math into a library

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

New issues:
- [Low] The new file rzv2h-cpg-lib.c uses EXPORT_SYMBOL_NS_GPL but fails to include <linux/export.h> or <linux/module.h>, which will cause compilation errors.

Pre-existing issues:
- [High] Multiplication of a signed 16-bit integer by an unsigned long results in incorrect calculations on 32-bit architectures, breaking the PLL fractional calculation for negative values.
--

commit 160d4676b08e19a075d3da03680cc8c66148bc74
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

clk: renesas: rzv2h-cpg: Extract PLL calculation math into a library

Move the common PLL and divider parameter calculation logic from the core
rzv2h-cpg driver into a standalone library file. Introduce the
CLK_RZV2H_CPG_LIB Kconfig configuration symbol. The original driver retains
wrappers that call into the new library helpers.

> diff --git a/drivers/clk/renesas/rzv2h-cpg-lib.c b/drivers/clk/renesas/rzv2h-cpg-lib.c
> new file mode 100644
> index 0000000000000..98e789df5d7f1
> --- /dev/null
> +++ b/drivers/clk/renesas/rzv2h-cpg-lib.c

[ ... ]

> +				/* Compute (Ffvco * 65536) */
> +				fvco = mul_u32_u32(p.m * 65536 + p.k, fref);
> +				if (fvco < mul_u32_u32(limits->fvco.min, 65536) ||
> +				    fvco > mul_u32_u32(limits->fvco.max, 65536))
> +					continue;
> +
> +				/* PLL_M component of (output * 65536 * PLL_P) */
> +				output = mul_u32_u32(p.m * 65536, input_fref);
> +				/* PLL_K component of (output * 65536 * PLL_P) */
> +				output += p.k * input_fref;

[Severity: High]
This is a pre-existing issue, but since the commit message mentions this
library will be shared with the upcoming RZ/T2H platforms (which are 32-bit),
could this calculation corrupt the output frequency when p.k is negative?

On 32-bit architectures, input_fref (unsigned long) is 32-bit. When p.k
(s16) is negative, standard C promotion rules convert it to a 32-bit
unsigned integer. The multiplication evaluates as a 32-bit unsigned product,
which is then zero-extended to 64 bits before being added to output (u64).

Instead of subtracting from output, won't this add a large positive number?

> +				/* Make it in mHz */
> +				output *= MILLI;
> +				output = DIV_U64_ROUND_CLOSEST(output, 65536 * p.p * divider);

[ ... ]

> +			}
> +		}
> +	}
> +
> +	/* If no valid parameters were found, return false */
> +	if (best.error_millihz == S64_MAX)
> +		return false;
> +
> +	*pars = best;
> +	return true;
> +}
> +EXPORT_SYMBOL_NS_GPL(rzv2h_cpg_get_pll_pars, "RZV2H_CPG");

[Severity: Low]
Does this file need to include <linux/export.h> or <linux/module.h>?

The EXPORT_SYMBOL_NS_GPL macro is used here, but the necessary headers
are missing from the includes at the top of the file. Could this cause
compilation errors on some architectures due to implicit declarations?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260609105924.962573-1-prabhakar.mahadev-lad.rj@bp.renesas.com?part=4

Re: [PATCH v2 5/5] clk: renesas: r9a09g077: Add LCDC and PLL3 clock support for RZ/T2H display pipeline

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 4 potential issue(s) to consider:
- [Critical] Unsafe cast of a dynamically-parented grandparent clock leads to type confusion and potential kernel panic.
- [Critical] Uninitialized stack variable `init` passed to clock registration framework causes undefined behavior and kernel panic.
- [High] The `determine_rate` callbacks illegally mutate internal hardware caching state, breaking the clock framework's stateless query design.
- [High] Unchecked hardware reads can cause a division by zero panic during clock tree initialization.
--

commit d7d90136d8420c2d9ce47a37c13ff3a993298ca0
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

clk: renesas: r9a09g077: Add LCDC and PLL3 clock support for RZ/T2H display pipeline

Add the clock definitions and PLL logic required to supply the LCDC
(VSPD/FCPVD/DU) blocks on the RZ/T2H (R9A09G077) SoC. Introduce a new PLL
clock type and implement rate recalculation, programming and locking sequences
for PLL3.

> diff --git a/drivers/clk/renesas/r9a09g077-cpg.c b/drivers/clk/renesas/r9a09g077-cpg.c
> index 93b15e06a19bc..44c8b5aaa2afb 100644
> --- a/drivers/clk/renesas/r9a09g077-cpg.c
> +++ b/drivers/clk/renesas/r9a09g077-cpg.c

[ ... ]

> @@ -480,6 +576,272 @@ r9a09g077_cpg_fselxspi_div_clk_register(struct device *dev,
>  	return hw->clk;
>  }
>  
> +static unsigned long r9a09g077_cpg_pll3_clk_recalc_rate(struct clk_hw *hw,
> +							unsigned long parent_rate)
> +{
> +	struct pll_clk *pll_clk = to_pll(hw);
> +	u32 ctr0, ctr1;
> +	u8 pdiv, sdiv;
> +	u64 rate;
> +	u16 mdiv;
> +	s16 kdiv;
> +
> +	ctr0 = readl(CPG_PLL3_VCO_CTR0(pll_clk->reg));
> +	ctr1 = readl(CPG_PLL3_VCO_CTR1(pll_clk->reg));
> +
> +	pdiv = FIELD_GET(CPG_PLL3_VCO_CTR0_PDIV, ctr0);
> +	mdiv = FIELD_GET(CPG_PLL3_VCO_CTR0_MDIV, ctr0);
> +	kdiv = (s16)FIELD_GET(CPG_PLL3_VCO_CTR1_KDIV, ctr1);
> +	sdiv = FIELD_GET(CPG_PLL3_VCO_CTR1_SDIV, ctr1);
> +
> +	rate = mul_u64_u32_shr(parent_rate, (mdiv << 16) + kdiv, 16 + sdiv);
> +
> +	return DIV_ROUND_CLOSEST_ULL(rate, pdiv);

[Severity: High]
Can pdiv be 0 here if the hardware defaults to a 0 state or the bootloader
has not initialized the PLL?

If pdiv is 0, will this DIV_ROUND_CLOSEST_ULL() macro trigger a division by
zero panic during clock tree initialization?

> +}
> +
> +static int r9a09g077_cpg_pll3_determine_rate(struct clk_hw *hw,
> +					     struct clk_rate_request *req)
> +{
> +	struct pll_clk *pll_clk = to_pll(hw);
> +	u64 rate_millihz;
> +
> +	if (req->rate == pll_clk->cur_rate)
> +		return 0;
> +
> +	rate_millihz = mul_u32_u32(req->rate, MILLI);
> +	if (!rzv2h_cpg_get_pll_pars(pll_clk->limits, &pll_clk->pll_parameters,
> +				    rate_millihz)) {
> +		dev_dbg(pll_clk->dev,
> +			"failed to determine rate for req->rate: %lu\n",
> +			req->rate);
> +		return -EINVAL;
> +	}
> +	req->rate = DIV_ROUND_CLOSEST_ULL(pll_clk->pll_parameters.freq_millihz, MILLI);
> +	pll_clk->cur_rate = req->rate;

[Severity: High]
Is it safe to mutate the driver's cached state (pll_clk->cur_rate and
pll_clk->pll_parameters) inside a .determine_rate callback?

Since the Common Clock Framework expects .determine_rate to be a stateless
query, could speculative queries like clk_round_rate() corrupt the cached
parameters, causing a subsequent clk_set_rate() for a different rate to
program the hardware with the wrong values?

> +
> +	return 0;
> +}

[ ... ]

> +static int r9a09g077_cpg_lcdc_div_determine_rate(struct clk_hw *hw,
> +						 struct clk_rate_request *req)
> +{
> +	struct r9a09g077_lcdc_div_clk *dsi_div = to_lcdc_div_clk(hw);
> +	struct pll_clk *pll_clk = to_pll(clk_hw_get_parent(clk_hw_get_parent(hw)));

[Severity: Critical]
Does this safely cast the grandparent hardware structure to struct pll_clk?

The immediate parent of this clock is CLK_SEL_CLK_PLL3, which is a mux that
can be parented to either .loco or .pll3. If the bootloader leaves the mux
parented to the fixed .loco clock, will clk_hw_get_parent() return the
fixed clock's hw structure instead?

If so, would casting it to struct pll_clk via to_pll() and dereferencing
its fields (like pll_clk->limits below) cause out-of-bounds memory accesses
and a panic?

> +	u8 table[RZT2H_MAX_LCDC_DIV_TABLES] = { 0 };
> +	struct rzv2h_pll_div_pars dsi_params;
> +	const struct clk_div_table *div;
> +	unsigned int i = 0;
> +	u64 freq_millihz;
> +
> +	for (div = dsi_div->dtable; div->div; div++) {
> +		if (i >= RZT2H_MAX_LCDC_DIV_TABLES)
> +			return -EINVAL;
> +		table[i++] = div->div;
> +	}
> +
> +	freq_millihz = mul_u32_u32(req->rate, MILLI);
> +
> +	if (!rzv2h_cpg_get_pll_divs_pars(pll_clk->limits, &dsi_params, table,
> +					 i, freq_millihz)) {
> +		dev_err(dsi_div->dev,
> +			"LCDC divider failed to determine rate for req->rate: %lu\n",
> +			req->rate);
> +		return -EINVAL;
> +	}
> +
> +	req->rate = DIV_ROUND_CLOSEST_ULL(dsi_params.div.freq_millihz, MILLI);
> +	req->best_parent_rate = req->rate * dsi_params.div.divider_value;
> +	dsi_div->divider = dsi_params.div.divider_value;
> +	pll_clk->cur_rate = req->best_parent_rate;
> +	pll_clk->pll_parameters = dsi_params.pll;

[Severity: High]
Does modifying dsi_div->divider, pll_clk->cur_rate, and
pll_clk->pll_parameters here violate the stateless design of CCF rate queries?

Similar to r9a09g077_cpg_pll3_determine_rate(), could speculative queries
corrupt the internal state of both this driver and its grandparent's PLL?

> +
> +	return 0;
> +}

[ ... ]

> +static struct clk * __init
> +r9a09g077_cpg_lcdc_div_clk_register(struct device *dev,
> +				    const struct cpg_core_clk *core,
> +				    void __iomem *addr,
> +				    struct cpg_mssr_pub *pub)
> +{
> +	struct r9a09g077_lcdc_div_clk *clk_hw_data;
> +	struct clk **clks = pub->clks;
> +	struct clk_init_data init;

[Severity: Critical]
Is it intentional that the struct clk_init_data init variable is allocated
on the stack without being zero-initialized (e.g., struct clk_init_data
init = {};)?

Will unassigned fields like parent_data and parent_hws contain random stack
garbage, causing the framework to attempt to dereference them in
devm_clk_hw_register() and resulting in a panic?

> +	const struct clk *parent;
> +	const char *parent_name;
> +	struct clk_hw *hw;
> +	int ret;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260609105924.962573-1-prabhakar.mahadev-lad.rj@bp.renesas.com?part=5

Re: [PATCH v2 1/5] clk: renesas: rzv2h-cpg: Use per-SoC PLL reference frequency for calculations

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

New issues:
- [Low] The newly introduced `input_fref` field in `struct rzv2h_pll_limits` is explicitly documented as expecting a value in MHz, but the implementation treats it strictly as Hz.

Pre-existing issues:
- [High] On 32-bit platforms, the fractional PLL calculation `p.k * input_fref` silently overflows and undergoes incorrect zero-extension, leading to severely incorrect frequencies.
--

commit 296b80de7b99b08d8c347f40aa51a8cb9a19cd69
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

clk: renesas: rzv2h-cpg: Use per-SoC PLL reference frequency for calculations

Introduce a per-SoC PLL reference input frequency parameter to avoid
relying on a hardcoded 24MHz constant during PLL configuration math.
This abstraction permits the reuse of the common PLL divider logic on
newer SoC platforms like the RZ/T2H, which feature a 48 MHz PLL reference
clock input instead of the 24 MHz signal used by RZ/V2H(P).

> diff --git a/drivers/clk/renesas/rzv2h-cpg.c b/drivers/clk/renesas/rzv2h-cpg.c
> index f6c47fb89bca5..513f8283c4796 100644
> --- a/drivers/clk/renesas/rzv2h-cpg.c
> +++ b/drivers/clk/renesas/rzv2h-cpg.c

[ ... ]

> @@ -330,9 +330,9 @@ bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
>  					continue;
>  
>  				/* PLL_M component of (output * 65536 * PLL_P) */
> -				output = mul_u32_u32(p.m * 65536, RZ_V2H_OSC_CLK_IN_MEGA);
> +				output = mul_u32_u32(p.m * 65536, input_fref);
>  				/* PLL_K component of (output * 65536 * PLL_P) */
> -				output += p.k * RZ_V2H_OSC_CLK_IN_MEGA;
> +				output += p.k * input_fref;

[Severity: High]
This is a pre-existing issue, but does this calculation silently overflow on
32-bit platforms?

Looking at rzv2h_get_pll_pars(), p.k is an s16 which can be negative.
Because input_fref is an unsigned long, which is 32-bit on 32-bit
architectures, multiplying the signed negative p.k promotes it to an
unsigned long.

This results in a large positive 32-bit integer instead of a properly
signed negative value. Since the destination output is a u64, this 32-bit
unsigned result is zero-extended to 64 bits, incorrectly increasing the
output frequency rather than appropriately subtracting from it.

Should this explicitly cast to 64-bit to ensure proper sign extension?
For example:

output += (s64)p.k * (u64)input_fref;

>  				/* Make it in mHz */
>  				output *= MILLI;
>  				output = DIV_U64_ROUND_CLOSEST(output, 65536 * p.p * divider);

[ ... ]

> diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h
> index c360df9fa735c..94ee70b20b44c 100644
> --- a/include/linux/clk/renesas.h
> +++ b/include/linux/clk/renesas.h
> @@ -53,6 +53,9 @@ static inline void rzg2l_cpg_dsi_div_set_divider(u8 divider, int target) { }
>   * various parameters used to configure a PLL. These limits ensure
>   * the PLL operates within valid and stable ranges.
>   *
> + * @input_fref: Reference input frequency to the PLL (in MHz). If set
> + * to 0, a default value of 24MHz is used.
> + *

[Severity: Low]
Is the documentation for input_fref in struct rzv2h_pll_limits accurate?

The kernel-doc mentions this field expects a value in MHz. However, looking
at the core calculation helper rzv2h_get_pll_pars(), the code expects this
to be in Hz.

If a driver author sets input_fref to 48 (following the MHz documentation),
the ternary operator in rzv2h_get_pll_pars() evaluates to 48 instead of the
24MHz fallback:

unsigned long input_fref = limits->input_fref ?: (24 * MEGA);

This results in an input frequency of exactly 48 Hz, which would cause
subsequent fvco bounds checks to fail.

Could the documentation be updated to clarify that this field expects the
frequency in Hz?

>   * @fout: Output frequency range (in MHz)
>   * @fout.min: Minimum allowed output frequency
>   * @fout.max: Maximum allowed output frequency

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260609105924.962573-1-prabhakar.mahadev-lad.rj@bp.renesas.com?part=1