[PATCH v5 11/15] ASoC: qcom: sm8250: add support for LPI_MI2S_RX_0 and LPI_MI2S_TX_3

[Richard Acayan <mailingradian@gmail.com>]

The LPI_MI2S_RX_0 and LPI_MI2S_TX_3 ports on SDM660 can be connected to
the digital and analog WCD codecs. They can be supported with the same
logic for other ports, but just need to be explicitly stated. Add
support for these ports.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 sound/soc/qcom/sm8250.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index f193d0ba63d0..1952c599e004 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -112,6 +112,22 @@ static int sm8250_snd_startup(struct snd_pcm_substream *substream)
 		snd_soc_dai_set_fmt(cpu_dai, fmt);
 		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
 		break;
+	case LPI_MI2S_RX_0:
+		codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
+		snd_soc_dai_set_sysclk(cpu_dai,
+			Q6AFE_LPASS_CLK_ID_INT0_MI2S_IBIT,
+			MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
+		snd_soc_dai_set_fmt(cpu_dai, fmt);
+		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+		break;
+	case LPI_MI2S_TX_3:
+		codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
+		snd_soc_dai_set_sysclk(cpu_dai,
+			Q6AFE_LPASS_CLK_ID_INT3_MI2S_IBIT,
+			MI2S_BCLK_RATE, SNDRV_PCM_STREAM_CAPTURE);
+		snd_soc_dai_set_fmt(cpu_dai, fmt);
+		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+		break;
 	default:
 		break;
 	}
-- 
2.54.0