Devicetree
 help / color / mirror / Atom feed
From: Nguyen Minh Tien <zizuzacker@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-kernel@vger.kernel.org, zizuzacker@gmail.com
Subject: [PATCH 0/2] iio: adc: Add Texas Instruments ADS1220 ADC
Date: Wed, 10 Jun 2026 22:13:40 +0700	[thread overview]
Message-ID: <20260610151342.44274-1-zizuzacker@gmail.com> (raw)

This series adds support for the Texas Instruments ADS1220, a 24-bit,
2-kSPS, 4-channel delta-sigma ADC with an SPI (mode 1) interface, a
programmable gain amplifier (1 to 128), an internal 2.048V reference and
a dedicated DRDY data-ready output.

The driver supports:
 - single-ended and differential voltage channels described as
   device-tree child nodes;
 - per-channel programmable gain (via _scale) and data rate (via
   _sampling_frequency), with the matching *_available attributes;
 - the internal 2.048V reference, an external reference on REFP0/REFN0
   via a regulator, or the analog supply (AVDD) as a ratiometric
   reference for single-supply measurements;
 - single-shot conversions gated on the DRDY interrupt, or on a
   data-rate-derived delay when no interrupt is wired;
 - a DRDY-interrupt-driven triggered buffer for streaming;
 - runtime PM (power-down between conversions).

I tested this on a Lichee Pi Nano (Allwinner F1C100s) running Linux 7.0:
with a potentiometer on AIN0 (single-ended against AVSS, AVDD as the
reference), in_voltage0_raw tracks the wiper linearly across the full
0..3.3V range (0 to 0x7fffff). Nothing in the driver is board-specific -
it only uses the SPI and IIO frameworks - so it should work on any SPI
host.

This is my first kernel contribution. I modelled the driver on the
existing TI ADS-family IIO drivers - ti-ads1119 for the structure and
ti-ads124s08 for the SPI side - so I'd welcome any feedback on things
I've missed.

Nguyen Minh Tien (2):
  dt-bindings: iio: adc: Add TI ADS1220
  iio: adc: Add TI ADS1220 driver

 .../bindings/iio/adc/ti,ads1220.yaml          | 146 +++
 MAINTAINERS                                   |   7 +
 drivers/iio/adc/Kconfig                       |  12 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ti-ads1220.c                  | 835 ++++++++++++++++++
 5 files changed, 1001 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1220.yaml
 create mode 100644 drivers/iio/adc/ti-ads1220.c


base-commit: ae696dfa47c30016cd429b9db5e70b259b8f509e
-- 
2.34.1


             reply	other threads:[~2026-06-10 15:13 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-10 15:13 Nguyen Minh Tien [this message]
2026-06-10 15:13 ` [PATCH 1/2] dt-bindings: iio: adc: Add TI ADS1220 Nguyen Minh Tien
2026-06-10 15:29   ` sashiko-bot
2026-06-10 15:13 ` [PATCH 2/2] iio: adc: Add TI ADS1220 driver Nguyen Minh Tien
2026-06-10 15:43   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260610151342.44274-1-zizuzacker@gmail.com \
    --to=zizuzacker@gmail.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox