From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, andriy.shevchenko@intel.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V12 5/9] iio: imu: inv_icm42607: Add PM support for icm42607
Date: Thu, 11 Jun 2026 15:26:02 -0500 [thread overview]
Message-ID: <20260611202607.85376-6-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260611202607.85376-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add power management support for the ICM42607 device driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/iio/imu/inv_icm42607/inv_icm42607.h | 18 +++
.../iio/imu/inv_icm42607/inv_icm42607_core.c | 131 ++++++++++++++++++
.../iio/imu/inv_icm42607/inv_icm42607_i2c.c | 1 +
.../iio/imu/inv_icm42607/inv_icm42607_spi.c | 1 +
4 files changed, 151 insertions(+)
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index c85d3b74166f..28edc12d5373 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -9,6 +9,7 @@
#include <linux/bits.h>
#include <linux/iio/iio.h>
#include <linux/mutex.h>
+#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/time.h>
@@ -105,11 +106,19 @@ struct inv_icm42607_hw {
u8 whoami;
};
+struct inv_icm42607_suspended {
+ enum inv_icm42607_sensor_mode gyro;
+ enum inv_icm42607_sensor_mode accel;
+ bool temp;
+};
+
/**
* struct inv_icm42607_state - driver state variables
* @hw: Hardware specific data.
* @map: regmap pointer.
* @vddio_supply: I/O voltage regulator for the chip.
+ * @suspended: suspended sensors configuration.
+ * @vddio_en: I/O voltage status for runtime PM.
* @lock: lock for serializing multiple registers access.
* @conf: chip sensors configurations.
* @orientation: sensor chip orientation relative to main hardware.
@@ -118,6 +127,8 @@ struct inv_icm42607_state {
const struct inv_icm42607_hw *hw;
struct regmap *map;
struct regulator *vddio_supply;
+ struct inv_icm42607_suspended suspended;
+ bool vddio_en;
struct mutex lock;
struct inv_icm42607_conf conf;
struct iio_mount_matrix orientation;
@@ -339,11 +350,18 @@ struct inv_icm42607_state {
#define INV_ICM42607_GYRO_STARTUP_TIME_MS 30
#define INV_ICM42607_TEMP_STARTUP_TIME_MS 77
+/*
+ * Suspend delay assumed from other icm42600 series device, not
+ * documented in datasheet.
+ */
+#define INV_ICM42607_SUSPEND_DELAY_MS (2 * USEC_PER_MSEC)
+
typedef int (*inv_icm42607_bus_setup)(struct inv_icm42607_state *);
extern const struct regmap_config inv_icm42607_regmap_config;
extern const struct inv_icm42607_hw inv_icm42607_hw_data;
extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
+extern const struct dev_pm_ops inv_icm42607_pm_ops;
int inv_icm42607_core_probe(struct regmap *regmap,
const struct inv_icm42607_hw *hw,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 5d40f1ee53d6..8073317088ec 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -11,6 +11,7 @@
#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/time.h>
@@ -102,6 +103,56 @@ const struct inv_icm42607_hw inv_icm42607p_hw_data = {
};
EXPORT_SYMBOL_NS_GPL(inv_icm42607p_hw_data, "IIO_ICM42607");
+static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
+ enum inv_icm42607_sensor_mode gyro,
+ enum inv_icm42607_sensor_mode accel,
+ bool temp, unsigned int *sleep_ms)
+{
+ enum inv_icm42607_sensor_mode oldaccel = st->conf.accel.mode;
+ enum inv_icm42607_sensor_mode oldgyro = st->conf.gyro.mode;
+ bool oldtemp = st->conf.temp_en;
+ unsigned int sleepval_ms;
+ unsigned int val;
+ int ret;
+
+ if (gyro == oldgyro && accel == oldaccel && temp == oldtemp)
+ return 0;
+
+ val = FIELD_PREP(INV_ICM42607_PWR_MGMT0_GYRO_MODE_MASK, gyro);
+ val |= FIELD_PREP(INV_ICM42607_PWR_MGMT0_ACCEL_MODE_MASK, accel);
+ /*
+ * Note that temp being enabled here doesn't affect PM since
+ * per 10.25 of the datasheet the clock will be off by default
+ * if both the gyro and accel modes are off.
+ */
+ if (!temp)
+ val |= INV_ICM42607_PWR_MGMT0_ACCEL_LP_CLK_SEL;
+ ret = regmap_write(st->map, INV_ICM42607_REG_PWR_MGMT0, val);
+ if (ret)
+ return ret;
+
+ st->conf.gyro.mode = gyro;
+ st->conf.accel.mode = accel;
+ st->conf.temp_en = temp;
+
+ sleepval_ms = 0;
+ if (temp && !oldtemp)
+ sleepval_ms = max(sleepval_ms, INV_ICM42607_TEMP_STARTUP_TIME_MS);
+
+ if (accel != oldaccel)
+ sleepval_ms = max(sleepval_ms, INV_ICM42607_ACCEL_STARTUP_TIME_MS);
+
+ if (gyro != oldgyro)
+ sleepval_ms = max(sleepval_ms, INV_ICM42607_GYRO_STARTUP_TIME_MS);
+
+ if (sleep_ms)
+ *sleep_ms = sleepval_ms;
+ else if (sleepval_ms)
+ fsleep(sleepval_ms * USEC_PER_MSEC);
+
+ return 0;
+}
+
static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
const struct inv_icm42607_conf *conf)
{
@@ -213,12 +264,17 @@ static int inv_icm42607_enable_vddio_reg(struct inv_icm42607_state *st)
{
int ret;
+ if (st->vddio_en)
+ return 0;
+
ret = regulator_enable(st->vddio_supply);
if (ret)
return ret;
fsleep(INV_ICM42607_POWER_UP_TIME_US);
+ st->vddio_en = true;
+
return 0;
}
@@ -226,7 +282,12 @@ static void inv_icm42607_disable_vddio_reg(void *_data)
{
struct inv_icm42607_state *st = _data;
+ if (!st->vddio_en)
+ return;
+
regulator_disable(st->vddio_supply);
+
+ st->vddio_en = false;
}
int inv_icm42607_core_probe(struct regmap *regmap,
@@ -241,6 +302,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (!st)
return -ENOMEM;
+ dev_set_drvdata(dev, st);
+
ret = devm_mutex_init(dev, &st->lock);
if (ret)
return ret;
@@ -276,10 +339,78 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (ret)
return ret;
+ ret = devm_pm_runtime_set_active_enabled(dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(dev, INV_ICM42607_SUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+
return 0;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
+static int inv_icm42607_suspend(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
+
+ inv_icm42607_disable_vddio_reg(st);
+
+ return 0;
+}
+
+static int inv_icm42607_resume(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ ret = inv_icm42607_enable_vddio_reg(st);
+ if (ret)
+ return ret;
+
+ return pm_runtime_force_resume(dev);
+}
+
+static int inv_icm42607_runtime_suspend(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+ guard(mutex)(&st->lock);
+
+ /* save sensors state */
+ st->suspended.gyro = st->conf.gyro.mode;
+ st->suspended.accel = st->conf.accel.mode;
+ st->suspended.temp = st->conf.temp_en;
+
+ return inv_icm42607_set_pwr_mgmt0(st, INV_ICM42607_SENSOR_MODE_OFF,
+ INV_ICM42607_SENSOR_MODE_OFF, false,
+ NULL);
+}
+
+static int inv_icm42607_runtime_resume(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+ guard(mutex)(&st->lock);
+
+ /* restore sensors state */
+ return inv_icm42607_set_pwr_mgmt0(st, st->suspended.gyro,
+ st->suspended.accel,
+ st->suspended.temp, NULL);
+}
+
+EXPORT_NS_GPL_DEV_PM_OPS(inv_icm42607_pm_ops, IIO_ICM42607) = {
+ SYSTEM_SLEEP_PM_OPS(inv_icm42607_suspend, inv_icm42607_resume)
+ RUNTIME_PM_OPS(inv_icm42607_runtime_suspend,
+ inv_icm42607_runtime_resume,
+ NULL)
+};
+
MODULE_AUTHOR("InvenSense, Inc.");
MODULE_DESCRIPTION("InvenSense ICM-42607 device driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
index a1484f32c5d9..6e7310db5598 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
@@ -85,6 +85,7 @@ static struct i2c_driver inv_icm42607_driver = {
.driver = {
.name = "inv-icm42607-i2c",
.of_match_table = inv_icm42607_of_matches,
+ .pm = pm_ptr(&inv_icm42607_pm_ops),
},
.id_table = inv_icm42607_id,
.probe = inv_icm42607_probe,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
index 0c8deb1f33e2..e361a692a32f 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
@@ -95,6 +95,7 @@ static struct spi_driver inv_icm42607_driver = {
.driver = {
.name = "inv-icm42607-spi",
.of_match_table = inv_icm42607_of_matches,
+ .pm = pm_ptr(&inv_icm42607_pm_ops),
},
.id_table = inv_icm42607_spi_id_table,
.probe = inv_icm42607_probe,
--
2.43.0
next prev parent reply other threads:[~2026-06-11 20:28 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-11 20:25 [PATCH V12 0/9] Add Invensense ICM42607 Chris Morgan
2026-06-11 20:25 ` [PATCH V12 1/9] dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600 Chris Morgan
2026-06-11 20:25 ` [PATCH V12 2/9] dt-bindings: iio: imu: icm42600: Add icm42607 Chris Morgan
2026-06-11 20:26 ` [PATCH V12 3/9] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver Chris Morgan
2026-06-11 20:39 ` sashiko-bot
2026-06-11 20:26 ` [PATCH V12 4/9] iio: imu: inv_icm42607: Add SPI For icm42607 Chris Morgan
2026-06-11 20:41 ` sashiko-bot
2026-06-11 20:26 ` Chris Morgan [this message]
2026-06-11 20:46 ` [PATCH V12 5/9] iio: imu: inv_icm42607: Add PM support for icm42607 sashiko-bot
2026-06-11 20:26 ` [PATCH V12 6/9] iio: imu: inv_icm42607: Add Temp Support in icm42607 Chris Morgan
2026-06-11 20:46 ` sashiko-bot
2026-06-11 20:26 ` [PATCH V12 7/9] iio: imu: inv_icm42607: Add Accelerometer for icm42607 Chris Morgan
2026-06-11 20:26 ` [PATCH V12 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607 Chris Morgan
2026-06-11 20:44 ` sashiko-bot
2026-06-11 20:26 ` [PATCH V12 9/9] arm64: dts: rockchip: Add icm42607p IMU for RG-DS Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260611202607.85376-6-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=heiko@sntech.de \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox