From: Jun Yan <jerrysteve1101@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Jun Yan <jerrysteve1101@gmail.com>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 00/10] Input: cap11xx - Add support for CAP1114
Date: Mon, 15 Jun 2026 22:20:26 +0800 [thread overview]
Message-ID: <20260615142103.352163-1-jerrysteve1101@gmail.com> (raw)
CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.
Patches 1-4 perform driver cleanup and DT binding tweaks.
Patches 5-6 add reset-gpios support for CAP11xx.
Patches 7-10 add support for CAP1114.
Changes in v3:
- Simplified the logic of the reset pin operation.
- Adjust linux,keycodes configuration for CAP11xx.
- Drop unnecessary CAP11XX_REG_SENSOR_THRESH(8).
- Checks for the presence of microchip,calib-sensitivity and
microchip,signal-guard properties before processing them.
- Link to v2:
https://lore.kernel.org/all/20260612072237.1177304-1-jerrysteve1101@gmail.com/
Changes in v2:
- Drop LED property tweaks, keep only reg changes and node regex
update in DT bindings.
- Split microchip,cap1126 LED reg constraints into a separate patch.
- Replace usleep_range() with msleep() for 500 ms delay during
reset pin handling.
- Add missing <linux/delay.h> for usleep_range() and msleep().
- Add CAP1114 to unsupported enum for microchip,signal-guard and
microchip,calib-sensitivity
- Add constraint for linux,keycodes to support CAP1114.
- When reading CAP1114 button status, mask STATUS1 to bits 0-5
and OR with STATUS2.
- Adjust code style.
- Link to v1:
https://lore.kernel.org/all/20260606150458.250606-1-jerrysteve1101@gmail.com
Jun Yan (10):
Input: cap11xx - clean up duplicate log and add probe error logs
Input: cap11xx - remove unused register macros
dt-bindings: input: microchip,cap11xx: Update datasheet URL and LED
reg range
dt-bindings: input: microchip,cap11xx: Add microchip,cap1126 LED reg
constraints
dt-bindings: input: microchip,cap11xx: Add reset-gpios property
Input: cap11xx - add reset gpio support
Input: cap11xx - refactor code for better CAP1114 support.
Input: cap11xx - guard unsupported DT properties before parsing
dt-bindings: input: microchip,cap11xx: Add CAP1114 support
Input: cap11xx - add support for CAP1114
.../bindings/input/microchip,cap11xx.yaml | 90 +++++-
drivers/input/keyboard/cap11xx.c | 280 +++++++++++-------
2 files changed, 253 insertions(+), 117 deletions(-)
--
2.54.0
next reply other threads:[~2026-06-15 14:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-15 14:20 Jun Yan [this message]
2026-06-15 14:20 ` [PATCH v3 01/10] Input: cap11xx - clean up duplicate log and add probe error logs Jun Yan
2026-06-15 14:20 ` [PATCH v3 02/10] Input: cap11xx - remove unused register macros Jun Yan
2026-06-15 14:34 ` sashiko-bot
2026-06-15 14:20 ` [PATCH v3 03/10] dt-bindings: input: microchip,cap11xx: Update datasheet URL and LED reg range Jun Yan
2026-06-15 16:27 ` Conor Dooley
2026-06-15 14:20 ` [PATCH v3 04/10] dt-bindings: input: microchip,cap11xx: Add microchip,cap1126 LED reg constraints Jun Yan
2026-06-15 16:24 ` Conor Dooley
2026-06-15 14:20 ` [PATCH v3 05/10] dt-bindings: input: microchip,cap11xx: Add reset-gpios property Jun Yan
2026-06-15 14:20 ` [PATCH v3 06/10] Input: cap11xx - add reset gpio support Jun Yan
2026-06-15 14:29 ` sashiko-bot
2026-06-15 14:20 ` [PATCH v3 07/10] Input: cap11xx - refactor code for better CAP1114 support Jun Yan
2026-06-15 14:20 ` [PATCH v3 08/10] Input: cap11xx - guard unsupported DT properties before parsing Jun Yan
2026-06-15 14:20 ` [PATCH v3 09/10] dt-bindings: input: microchip,cap11xx: Add CAP1114 support Jun Yan
2026-06-15 16:24 ` Conor Dooley
2026-06-15 14:20 ` [PATCH v3 10/10] Input: cap11xx - add support for CAP1114 Jun Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260615142103.352163-1-jerrysteve1101@gmail.com \
--to=jerrysteve1101@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox