Devicetree
 help / color / mirror / Atom feed
From: Akhil R <akhilrajeev@nvidia.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Frank Li <Frank.Li@nxp.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Jon Hunter <jonathanh@nvidia.com>,
	Thierry Reding <thierry.reding@kernel.org>,
	<linux-i3c@lists.infradead.org>, <devicetree@vger.kernel.org>,
	<linux-hwmon@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Akhil R <akhilrajeev@nvidia.com>
Subject: [PATCH v4 08/12] i3c: dw-i3c-master: Add a quirk to skip clock and reset
Date: Tue, 16 Jun 2026 09:54:22 +0000	[thread overview]
Message-ID: <20260616095429.3947205-9-akhilrajeev@nvidia.com> (raw)
In-Reply-To: <20260616095429.3947205-1-akhilrajeev@nvidia.com>

Some ACPI-enumerated devices like Tegra410 do not have clock and reset
resources exposed via the clk/reset frameworks. Unlike device tree,
ACPI on Arm does not model such provider functions. The hardware is
expected to be brought out of reset and have its clocks enabled by the
firmware before the OS takes over. Any data to be shared with the OS is
passed using the _DSD property.

Add match data for such devices to skip acquiring clock and reset controls
during probe and read the clock rate from the "clock-frequency" _DSD
property. Note that the "clock-frequency" here is the controller's core
clock and not the bus speed. I3C specifies the bus speed separately using
"i3c-scl-hz" and "i2c-scl-hz" and hence this should not cause any conflict.

Also, move match data parsing before clock/reset acquisition so the quirk
is available early enough.

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
---
 drivers/i3c/master/dw-i3c-master.c | 66 ++++++++++++++++++++----------
 1 file changed, 44 insertions(+), 22 deletions(-)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 3e510fddf06c..a2a4b88c2017 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -242,6 +242,7 @@
 /* List of quirks */
 #define AMD_I3C_OD_PP_TIMING		BIT(1)
 #define DW_I3C_DISABLE_RUNTIME_PM_QUIRK	BIT(2)
+#define DW_I3C_ACPI_SKIP_CLK_RST		BIT(3)
 
 struct dw_i3c_cmd {
 	u32 cmd_lo;
@@ -556,13 +557,28 @@ static void dw_i3c_master_set_intr_regs(struct dw_i3c_master *master)
 	writel(IBI_REQ_REJECT_ALL, master->regs + IBI_MR_REQ_REJECT);
 }
 
+static unsigned long dw_i3c_master_get_core_rate(struct dw_i3c_master *master)
+{
+	unsigned int core_rate_prop;
+
+	if (!(master->quirks & DW_I3C_ACPI_SKIP_CLK_RST))
+		return clk_get_rate(master->core_clk);
+
+	if (device_property_read_u32(master->dev, "clock-frequency", &core_rate_prop)) {
+		dev_err(master->dev, "missing clock-frequency property\n");
+		return 0;
+	}
+
+	return core_rate_prop;
+}
+
 static int dw_i3c_clk_cfg(struct dw_i3c_master *master)
 {
 	unsigned long core_rate, core_period;
 	u32 scl_timing;
 	u8 hcnt, lcnt;
 
-	core_rate = clk_get_rate(master->core_clk);
+	core_rate = dw_i3c_master_get_core_rate(master);
 	if (!core_rate)
 		return -EINVAL;
 
@@ -615,7 +631,7 @@ static int dw_i2c_clk_cfg(struct dw_i3c_master *master)
 	u16 hcnt, lcnt;
 	u32 scl_timing;
 
-	core_rate = clk_get_rate(master->core_clk);
+	core_rate = dw_i3c_master_get_core_rate(master);
 	if (!core_rate)
 		return -EINVAL;
 
@@ -1577,18 +1593,33 @@ int dw_i3c_common_probe(struct dw_i3c_master *master,
 	if (IS_ERR(master->regs))
 		return PTR_ERR(master->regs);
 
-	master->core_clk = devm_clk_get_enabled(&pdev->dev, NULL);
-	if (IS_ERR(master->core_clk))
-		return PTR_ERR(master->core_clk);
-
-	master->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
-	if (IS_ERR(master->pclk))
-		return PTR_ERR(master->pclk);
+	if (has_acpi_companion(&pdev->dev)) {
+		quirks = (unsigned long)device_get_match_data(&pdev->dev);
+	} else if (pdev->dev.of_node) {
+		drvdata = device_get_match_data(&pdev->dev);
+		if (drvdata)
+			quirks = drvdata->flags;
+	}
+	master->quirks = quirks;
 
-	master->core_rst = devm_reset_control_get_optional_exclusive_deasserted(&pdev->dev,
-										"core_rst");
-	if (IS_ERR(master->core_rst))
-		return PTR_ERR(master->core_rst);
+	if (master->quirks & DW_I3C_ACPI_SKIP_CLK_RST) {
+		master->core_clk = NULL;
+		master->pclk = NULL;
+		master->core_rst = NULL;
+	} else {
+		master->core_clk = devm_clk_get_enabled(&pdev->dev, NULL);
+		if (IS_ERR(master->core_clk))
+			return PTR_ERR(master->core_clk);
+
+		master->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
+		if (IS_ERR(master->pclk))
+			return PTR_ERR(master->pclk);
+
+		master->core_rst = devm_reset_control_get_optional_exclusive_deasserted(&pdev->dev,
+											"core_rst");
+		if (IS_ERR(master->core_rst))
+			return PTR_ERR(master->core_rst);
+	}
 
 	spin_lock_init(&master->xferqueue.lock);
 	INIT_LIST_HEAD(&master->xferqueue.list);
@@ -1636,15 +1667,6 @@ int dw_i3c_common_probe(struct dw_i3c_master *master,
 		master->has_ibi_data = true;
 	writel(thld_ctrl, master->regs + QUEUE_THLD_CTRL);
 
-	if (has_acpi_companion(&pdev->dev)) {
-		quirks = (unsigned long)device_get_match_data(&pdev->dev);
-	} else if (pdev->dev.of_node) {
-		drvdata = device_get_match_data(&pdev->dev);
-		if (drvdata)
-			quirks = drvdata->flags;
-	}
-	master->quirks = quirks;
-
 	/* Keep controller enabled by preventing runtime suspend */
 	if (master->quirks & DW_I3C_DISABLE_RUNTIME_PM_QUIRK)
 		pm_runtime_get_noresume(&pdev->dev);
-- 
2.43.0


  parent reply	other threads:[~2026-06-16  9:56 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-16  9:54 [PATCH v4 00/12] Support ACPI and SETAASA device discovery Akhil R
2026-06-16  9:54 ` [PATCH v4 01/12] dt-bindings: i3c: Add mipi-i3c-static-method to support SETAASA Akhil R
2026-06-16 10:04   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 02/12] i3c: master: Use unified device property interface Akhil R
2026-06-16 10:17   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 03/12] i3c: master: Support ACPI enumeration of child devices Akhil R
2026-06-16 10:15   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 04/12] i3c: master: Add support for devices using SETAASA Akhil R
2026-06-16 10:19   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 05/12] i3c: master: Add support for devices without PID Akhil R
2026-06-16 10:17   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 06/12] i3c: master: match I3C device through DT and ACPI Akhil R
2026-06-16 10:12   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 07/12] i3c: dw-i3c-master: Add SETAASA as supported CCC Akhil R
2026-06-16 10:13   ` sashiko-bot
2026-06-16  9:54 ` Akhil R [this message]
2026-06-16 10:14   ` [PATCH v4 08/12] i3c: dw-i3c-master: Add a quirk to skip clock and reset sashiko-bot
2026-06-16  9:54 ` [PATCH v4 09/12] i3c: dw-i3c-master: Add ACPI ID for Tegra410 Akhil R
2026-06-16 10:09   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 10/12] hwmon: spd5118: Remove 16-bit addressing Akhil R
2026-06-16 10:09   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 11/12] hwmon: spd5118: Add I3C support Akhil R
2026-06-16 10:30   ` sashiko-bot
2026-06-16  9:54 ` [PATCH v4 12/12] arm64: defconfig: Enable I3C and SPD5118 hwmon Akhil R
2026-06-16 10:10   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260616095429.3947205-9-akhilrajeev@nvidia.com \
    --to=akhilrajeev@nvidia.com \
    --cc=Frank.Li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=thierry.reding@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox