Re: [PATCH v2 3/3] phy: rockchip: phy-rockchip-inno-csidphy: add clock lane phase tuning

[sashiko-bot@kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The macro `CSIDPHY_CLK_PHASE_DEFAULT` is defined but never used.
--

commit 47571c2082c0165537db96312865f3a9805e768d
Author: Gerald Loacker <gerald.loacker@wolfvision.net>

phy: rockchip: phy-rockchip-inno-csidphy: add clock lane phase tuning

This commit adds support for parsing the 'rockchip,clk-lane-phase' device
tree property to adjust the clock lane sampling phase. It enables
board-specific tuning to optimize link stability at high data rates, falling
back to hardware defaults if the property is absent.

> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
> index 5281f8dea0ad3..3a15840e86cad 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
> @@ -69,6 +69,10 @@
>  #define RK1808_CSIDPHY_CLK_CALIB_EN		0x168
>  #define RK3568_CSIDPHY_CLK_CALIB_EN		0x168
>  
> +#define CSIDPHY_LANE_CLK_3_PHASE		0x38
> +#define CSIDPHY_CLK_PHASE_MASK			GENMASK(6, 4)
> +#define CSIDPHY_CLK_PHASE_DEFAULT		3

[Severity: Low]
Is this macro intended to be used somewhere? 

It appears to be defined but never used, since the driver falls back to the
hardware default by initializing priv->clk_phase to -1 in
rockchip_inno_csidphy_probe() and conditionally skipping the register write in
rockchip_inno_csidphy_power_on():

	if (priv->clk_phase >= 0) {
		val = readl(priv->phy_base + CSIDPHY_LANE_CLK_3_PHASE);
		...
	}

Can CSIDPHY_CLK_PHASE_DEFAULT be safely removed?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260619-feature-mipi-csi-dphy-4k60-v2-0-323356c2cc2e@wolfvision.net?part=3