[PATCH v2 0/2] iio: temperature: Add support for the STS30 temperature sensor

[Maxwell Doose <m32285159@gmail.com>]

Hi all,

This patch series adds support for the Sensirion STS30 temperature
sensor family. This driver currently supports non clock stretched single
shot measurements.

Given there were very little issues found with the v1 submission, I've
decided to make this a regular patch series rather than an RFC patch.

Changes since v1:
* whole series:
- Squashed MAINTAINERS updates into both the dt-bindings commit and the
  driver commit.

* dt-bindings:
- Added ALERT pin as an interrupt and in the examples.

* driver:
- Fixed a mixup between the clock-stretched and non-clock stretched
  commands.
- Fixed an issue where the return value of sts30_reset() was ignored.
- Removed redundant "Author" line at the top.
- Added comment at the top for the formula used to calculate the
temperature in Celsius alongside a macro.
- Added a dedicated macro for the temperature reading size.
- Separated the generic linux headers from the iio specific headers.
- Removed kernel.h from includes.
- Removed unneeded comments.
- Used named initializers for sts30_id and moved above _probe().

Maxwell Doose (2):
  dt-bindings: iio: temperature: Add STS30 devicetree bindings
  iio: temperature: Add STS30 temperature sensor driver

 .../iio/temperature/sensirion,sts30.yaml      |  55 +++
 MAINTAINERS                                   |   6 +
 drivers/iio/temperature/Kconfig               |  11 +
 drivers/iio/temperature/Makefile              |   1 +
 drivers/iio/temperature/sts30.c               | 329 ++++++++++++++++++
 5 files changed, 402 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/temperature/sensirion,sts30.yaml
 create mode 100644 drivers/iio/temperature/sts30.c

-- 
2.54.0