[PATCH v2 2/4] clk: en7523: add support for dedicated PCIe PERSTOUT reset

[Christian Marangi <ansuelsmth@gmail.com>]

Add support for resetting the PCIe lines with the PERSTOUT reset. These
special reset are controlled by the PCIC register and are specific to each
of the 3 PCIe lines.

Notice that reset logic is inverted for these bit where 0 is assert and 1
deassert. This is intenrally handled in the reset function.

PCI enable/disable are updated to drop PERSTOUT bits in favor dedicated
reset handling.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/clk-en7523.c | 39 ++++++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 1ab0e2eca5d3..c9b21d9bf2f3 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -338,6 +338,7 @@ static const struct en_clk_desc en7581_base_clks[] = {
 static const u16 en7581_rst_ofs[] = {
 	REG_RST_CTRL2,
 	REG_RST_CTRL1,
+	REG_NP_SCU_PCIC,
 };
 
 static const u16 en751221_rst_ofs[] = {
@@ -450,6 +451,11 @@ static const u16 en7581_rst_map[] = {
 	[EN7581_CPU_TIMER_RST]		= RST_NR_PER_BANK + 28,
 	[EN7581_PCIE_HB_RST]		= RST_NR_PER_BANK + 29,
 	[EN7581_XPON_MAC_RST]		= RST_NR_PER_BANK + 31,
+
+	/* RST_PCIC */
+	[EN7581_PCIC_PERSTOUT0_RST]	= 2 * RST_NR_PER_BANK + 29,
+	[EN7581_PCIC_PERSTOUT1_RST]	= 2 * RST_NR_PER_BANK + 26,
+	[EN7581_PCIC_PERSTOUT2_RST]	= 2 * RST_NR_PER_BANK + 16,
 };
 
 static const u16 en751221_rst_map[] = {
@@ -635,9 +641,7 @@ static int en7581_pci_enable(struct clk_hw *hw)
 	void __iomem *np_base = cg->base;
 	u32 val, mask;
 
-	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1 |
-	       REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT2 |
-	       REG_PCI_CONTROL_PERSTOUT;
+	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
 	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val | mask, np_base + REG_PCI_CONTROL);
 
@@ -650,9 +654,7 @@ static void en7581_pci_disable(struct clk_hw *hw)
 	void __iomem *np_base = cg->base;
 	u32 val, mask;
 
-	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1 |
-	       REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT2 |
-	       REG_PCI_CONTROL_PERSTOUT;
+	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
 	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val & ~mask, np_base + REG_PCI_CONTROL);
 	usleep_range(1000, 2000);
@@ -754,14 +756,21 @@ static int en7523_reset_update(struct reset_controller_dev *rcdev,
 			       unsigned long id, bool assert)
 {
 	struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
-	void __iomem *addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
+	u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
+	void __iomem *addr = rst_data->base + offset;
+	bool inverted = false;
 	u32 val;
 
+	/* For PCIC reset logic is inverted, 0:assert 1:deassert*/
+	if (offset == REG_NP_SCU_PCIC)
+		inverted = true;
+
 	val = readl(addr);
+	val &= ~BIT(id % RST_NR_PER_BANK);
 	if (assert)
-		val |= BIT(id % RST_NR_PER_BANK);
+		val |= inverted ? 0 : BIT(id % RST_NR_PER_BANK);
 	else
-		val &= ~BIT(id % RST_NR_PER_BANK);
+		val |= inverted ? BIT(id % RST_NR_PER_BANK) : 0;
 	writel(val, addr);
 
 	return 0;
@@ -783,9 +792,17 @@ static int en7523_reset_status(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
 	struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
-	void __iomem *addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
+	u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
+	void __iomem *addr = rst_data->base + offset;
+	bool inverted = false;
+	u32 val;
+
+	/* For PCIC reset logic is inverted, 0:assert 1:deassert*/
+	if (offset == REG_NP_SCU_PCIC)
+		inverted = true;
 
-	return !!(readl(addr) & BIT(id % RST_NR_PER_BANK));
+	val = readl(addr) & BIT(id % RST_NR_PER_BANK);
+	return inverted ? !val : !!val;
 }
 
 static int en7523_reset_xlate(struct reset_controller_dev *rcdev,
-- 
2.53.0