From: Nikhil Gautam <nikhilgtr@gmail.com>
To: linux-iio@vger.kernel.org
Cc: jic23@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com,
andy@kernel.org, u.kleine-koenig@baylibre.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Nikhil Gautam <nikhilgtr@gmail.com>
Subject: [PATCH v4 1/2] dt-bindings: iio: magnetometer: add Melexis MLX90393
Date: Sat, 27 Jun 2026 15:25:18 +0530 [thread overview]
Message-ID: <20260627095519.8377-2-nikhilgtr@gmail.com> (raw)
In-Reply-To: <20260627095519.8377-1-nikhilgtr@gmail.com>
Add devicetree bindings for the Melexis MLX90393
3-axis magnetometer and temperature sensor.
The device supports magnetic field and temperature
measurements over I2C and SPI interfaces.
This initial binding documents the I2C interface.
Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
---
.../iio/magnetometer/melexis,mlx90393.yaml | 63 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml b/Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
new file mode 100644
index 000000000000..91e984827786
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/melexis,mlx90393.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melexis MLX90393 magnetometer sensor
+
+maintainers:
+ - Nikhil Gautam <nikhilgtr@gmail.com>
+
+description:
+ Melexis MLX90393 3-axis magnetometer and temperature sensor.
+
+properties:
+ compatible:
+ const: melexis,mlx90393
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor
+
+ vddio-supply:
+ description: Regulator that provides power to the bus
+
+ interrupts:
+ maxItems: 1
+
+ trigger-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@c {
+ compatible = "melexis,mlx90393";
+ reg = <0x0c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+
+ trigger-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a92290fffa16..469ae3f9aa0f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15501,6 +15501,12 @@ F: Documentation/scsi/megaraid.rst
F: drivers/scsi/megaraid.*
F: drivers/scsi/megaraid/
+MELEXIS MLX90393 MAGNETOMETER DRIVER
+M: Nikhil Gautam <nikhilgtr@gmail.com>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
+
MELEXIS MLX90614 DRIVER
M: Crt Mori <cmo@melexis.com>
L: linux-iio@vger.kernel.org
--
2.39.5
next prev parent reply other threads:[~2026-06-27 9:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-27 9:55 [PATCH v4 0/2] iio: magnetometer: add support for Melexis MLX90393 Nikhil Gautam
2026-06-27 9:55 ` Nikhil Gautam [this message]
2026-06-27 9:55 ` [PATCH v4 2/2] " Nikhil Gautam
2026-06-27 10:06 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260627095519.8377-2-nikhilgtr@gmail.com \
--to=nikhilgtr@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox