[PATCH 1/2] media: dt-bindings: Add Himax HM1092 NIR sensor

[Ramshouriesh R <rshouriesh@gmail.com>]

Add a dt-binding schema for the Himax HM1092, a 1 megapixel monochrome
near-infrared CMOS image sensor used as the face-authentication IR
camera on laptops. The sensor streams 10-bit RAW over a single MIPI
CSI-2 data lane.

Signed-off-by: Ramshouriesh R <rshouriesh@gmail.com>
---
 .../bindings/media/i2c/himax,hm1092.yaml           | 107 +++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/himax,hm1092.yaml b/Documentation/devicetree/bindings/media/i2c/himax,hm1092.yaml
new file mode 100644
index 000000000000..d324569836af
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/himax,hm1092.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/himax,hm1092.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HM1092 Monochrome NIR Sensor
+
+maintainers:
+  - Ramshouriesh R <rshouriesh@gmail.com>
+
+description:
+  The Himax HM1092 is a 1 megapixel monochrome near-infrared CMOS image
+  sensor with a MIPI CSI-2 interface, commonly used as the IR camera for
+  face authentication on laptops. It outputs 10-bit RAW over a single
+  MIPI CSI-2 data lane.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: himax,hm1092
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  reset-gpios:
+    maxItems: 1
+    description: Active low GPIO connected to the XSHUTDOWN pad.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            maxItems: 1
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - avdd-supply
+  - dovdd-supply
+  - dvdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@24 {
+            compatible = "himax,hm1092";
+            reg = <0x24>;
+
+            reset-gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_ir_default>;
+
+            clocks = <&camcc 1>;
+            assigned-clocks = <&camcc 1>;
+            assigned-clock-rates = <24000000>;
+
+            orientation = <0>;
+
+            avdd-supply = <&vreg_l7m_2p9>;
+            dvdd-supply = <&vreg_l7m_2p9>;
+            dovdd-supply = <&vreg_l4m_1p8>;
+
+            port {
+                hm1092_ep: endpoint {
+                    data-lanes = <1>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                    remote-endpoint = <&camss_csiphy0_inep>;
+                };
+            };
+        };
+    };
+...

-- 
2.53.0