Devicetree
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Junhui Liu <junhui.liu@pigmoral.tech>,
	 Alexandre Belloni <alexandre.belloni@bootlin.com>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	 Samuel Holland <samuel@sholland.org>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Maxime Ripard <mripard@kernel.org>
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,  linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org,  Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH v3 8/8] clk: sunxi-ng: sun6i-rtc: add a733 support
Date: Thu, 02 Jul 2026 10:10:07 +0200	[thread overview]
Message-ID: <20260702-a733-rtc-v3-8-eb2580374de6@baylibre.com> (raw)
In-Reply-To: <20260702-a733-rtc-v3-0-eb2580374de6@baylibre.com>

Add support for the sun60i a733 CCU RTC.

Compared to the a523, this SoC has a different input oscillator divider
which auto-detects the oscillator rate and select a divider to provide
a fixed 32768Hz clock. It also provides several phy reference clocks
with dedicated clock gates.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/sunxi-ng/ccu-sun6i-rtc.c | 73 ++++++++++++++++++++++++++++++++++--
 drivers/clk/sunxi-ng/ccu-sun6i-rtc.h |  2 +-
 2 files changed, 71 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
index 25dd87e78eb7..6b71bbd80255 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
@@ -44,9 +44,13 @@
 #define DCXO_CTRL_REG			0x160
 #define DCXO_CTRL_CLK16M_RC_EN		BIT(0)
 
+#define DCXO_GATING_REG			0x16c
+
 struct sun6i_rtc_match_data {
 	bool				have_ext_osc32k		: 1;
 	bool				have_iosc_calibration	: 1;
+	bool				have_dcxo_status	: 1;
+	bool				have_phy_ref_gates	: 1;
 	bool				rtc_32k_single_parent	: 1;
 	const struct clk_parent_data	*osc32k_fanout_parents;
 	u8				osc32k_fanout_nparents;
@@ -213,7 +217,12 @@ static struct ccu_mux osc32k_clk = {
 	},
 };
 
-/* This falls back to the global name for fwnodes without a named reference. */
+/*
+ * This falls back to the global name for fwnodes without a named reference.
+ * NOTE: osc24M name might be misleading the oscillator could also be a 26MHz
+ * or a 19.2MHz one starting with the a733. The original name is kept anyway
+ * in case anything is relying on it.
+ */
 static const struct clk_parent_data osc24M[] = {
 	{ .fw_name = "hosc", .name = "osc24M" }
 };
@@ -227,8 +236,28 @@ static struct clk_fixed_factor osc24M_32k_div_clk = {
 					    0),
 };
 
-static SUNXI_CCU_GATE_HW(osc24M_32k_clk, "osc24M-32k", &osc24M_32k_div_clk.hw,
-			 LOSC_OUT_GATING_REG, BIT(16), 0);
+static struct clk_div_table osc24M_32k_div_a733_table[] = {
+	{ .val = 0, .div = 732 },
+	{ .val = 1, .div = 586 },
+	{ .val = 2, .div = 793 },
+	{ .val = 3, .div = 732 },
+	{ /* Sentinel */ },
+};
+
+static struct ccu_div osc24M_32k_div_a733_clk = {
+	.enable = BIT(1),
+	.div	= _SUNXI_CCU_DIV_TABLE(14, 2, osc24M_32k_div_a733_table),
+	.common	= {
+		.reg		= DCXO_CTRL_REG,
+		.hw.init	= CLK_HW_INIT_PARENTS_DATA("osc24M-32k-div",
+							   osc24M,
+							   &ccu_rodiv_ops,
+							   0),
+	},
+};
+
+static SUNXI_CCU_GATE(osc24M_32k_clk, "osc24M-32k", "osc24M-32k-div",
+		      LOSC_OUT_GATING_REG, BIT(16), 0);
 
 static const struct clk_hw *rtc_32k_parents[] = {
 	&osc32k_clk.common.hw,
@@ -267,6 +296,15 @@ static struct ccu_mux osc32k_fanout_clk = {
 	},
 };
 
+static SUNXI_CCU_GATE_FW(hosc_serdes1_clk, "hosc-serdes1", "hosc",
+		      DCXO_GATING_REG, BIT(5), 0);
+static SUNXI_CCU_GATE_FW(hosc_serdes0_clk, "hosc-serdes0", "hosc",
+		      DCXO_GATING_REG, BIT(4), 0);
+static SUNXI_CCU_GATE_FW(hosc_hdmi_clk, "hosc-hdmi", "hosc",
+		      DCXO_GATING_REG, BIT(1), 0);
+static SUNXI_CCU_GATE_FW(hosc_ufs_clk, "hosc-ufs", "hosc",
+		      DCXO_GATING_REG, BIT(0), 0);
+
 static struct ccu_common *sun6i_rtc_ccu_clks[] = {
 	&iosc_clk,
 	&iosc_32k_clk,
@@ -275,6 +313,11 @@ static struct ccu_common *sun6i_rtc_ccu_clks[] = {
 	&osc24M_32k_clk.common,
 	&rtc_32k_clk.common,
 	&osc32k_fanout_clk.common,
+	&osc24M_32k_div_a733_clk.common,
+	&hosc_serdes1_clk.common,
+	&hosc_serdes0_clk.common,
+	&hosc_hdmi_clk.common,
+	&hosc_ufs_clk.common,
 };
 
 static struct clk_hw_onecell_data sun6i_rtc_ccu_hw_clks = {
@@ -288,6 +331,10 @@ static struct clk_hw_onecell_data sun6i_rtc_ccu_hw_clks = {
 		[CLK_OSC24M_32K]	= &osc24M_32k_clk.common.hw,
 		[CLK_RTC_32K]		= &rtc_32k_clk.common.hw,
 		[CLK_OSC24M_32K_DIV]	= &osc24M_32k_div_clk.hw,
+		[CLK_HOSC_UFS]		= &hosc_ufs_clk.common.hw,
+		[CLK_HOSC_HDMI]		= &hosc_hdmi_clk.common.hw,
+		[CLK_HOSC_SERDES0]	= &hosc_serdes0_clk.common.hw,
+		[CLK_HOSC_SERDES1]	= &hosc_serdes1_clk.common.hw,
 	},
 };
 
@@ -330,6 +377,15 @@ static const struct sun6i_rtc_match_data sun55i_a523_rtc_ccu_data = {
 	.osc32k_fanout_nparents	= ARRAY_SIZE(sun50i_r329_osc32k_fanout_parents),
 };
 
+static const struct sun6i_rtc_match_data sun60i_a733_rtc_ccu_data = {
+	.have_ext_osc32k	= true,
+	.have_iosc_calibration	= true,
+	.have_dcxo_status	= true,
+	.have_phy_ref_gates	= true,
+	.osc32k_fanout_parents	= sun50i_r329_osc32k_fanout_parents,
+	.osc32k_fanout_nparents	= ARRAY_SIZE(sun50i_r329_osc32k_fanout_parents),
+};
+
 static const struct of_device_id sun6i_rtc_ccu_match[] = {
 	{
 		.compatible	= "allwinner,sun50i-h616-rtc",
@@ -343,6 +399,10 @@ static const struct of_device_id sun6i_rtc_ccu_match[] = {
 		.compatible	= "allwinner,sun55i-a523-rtc",
 		.data		= &sun55i_a523_rtc_ccu_data,
 	},
+	{
+		.compatible	= "allwinner,sun60i-a733-rtc",
+		.data		= &sun60i_a733_rtc_ccu_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, sun6i_rtc_ccu_match);
@@ -375,6 +435,13 @@ int sun6i_rtc_ccu_probe(struct device *dev, void __iomem *reg)
 	osc32k_fanout_init_data.parent_data = data->osc32k_fanout_parents;
 	osc32k_fanout_init_data.num_parents = data->osc32k_fanout_nparents;
 
+	if (data->have_dcxo_status)
+		sun6i_rtc_ccu_hw_clks.hws[CLK_OSC24M_32K_DIV] =
+			&osc24M_32k_div_a733_clk.common.hw;
+
+	if (!data->have_phy_ref_gates)
+		sun6i_rtc_ccu_hw_clks.num = CLK_OSC24M_32K_DIV + 1;
+
 	return devm_sunxi_ccu_probe(dev, reg, &sun6i_rtc_ccu_desc);
 }
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.h b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.h
index ab7b92b47f59..4f4f4cb00f1d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.h
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.h
@@ -11,6 +11,6 @@
 #define CLK_RTC_32K		6
 #define CLK_OSC24M_32K_DIV	7
 
-#define CLK_NUMBER		(CLK_OSC24M_32K_DIV + 1)
+#define CLK_NUMBER		(CLK_HOSC_SERDES1 + 1)
 
 #endif /* _CCU_SUN6I_RTC_H */

-- 
2.47.3


  parent reply	other threads:[~2026-07-02  8:11 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-02  8:09 [PATCH v3 0/8] clk: sun6i-rtc: Add support for Allwinner A733 SoC Jerome Brunet
2026-07-02  8:10 ` [PATCH v3 1/8] dt-bindings: rtc: sun6i: no clock-output-names on h616/r329 Jerome Brunet
2026-07-02  8:17   ` sashiko-bot
2026-07-02 13:23   ` Chen-Yu Tsai
2026-07-02 18:44   ` Conor Dooley
2026-07-02  8:10 ` [PATCH v3 2/8] dt-bindings: rtc: sun6i: add sun60i-a733 support Jerome Brunet
2026-07-02  8:16   ` sashiko-bot
2026-07-02 18:45   ` Conor Dooley
2026-07-02  8:10 ` [PATCH v3 3/8] clk: sunxi-ng: fix ccu probe clock unregister on error Jerome Brunet
2026-07-02  8:16   ` sashiko-bot
2026-07-02 13:23   ` Chen-Yu Tsai
2026-07-02  8:10 ` [PATCH v3 4/8] clk: sunxi-ng: sun6i-rtc: clean up DT usage Jerome Brunet
2026-07-02  8:21   ` sashiko-bot
2026-07-02  8:10 ` [PATCH v3 5/8] clk: sunxi-ng: sun6i-rtc: Add feature bit for IOSC calibration Jerome Brunet
2026-07-02  8:19   ` sashiko-bot
2026-07-02  8:10 ` [PATCH v3 6/8] clk: sunxi-ng: div: add read-only operation support Jerome Brunet
2026-07-02  8:26   ` sashiko-bot
2026-07-02  8:10 ` [PATCH v3 7/8] clk: sunxi-ng: sun6i-rtc: split main oscillator div and gate Jerome Brunet
2026-07-02  8:23   ` sashiko-bot
2026-07-02  8:10 ` Jerome Brunet [this message]
2026-07-02  8:29   ` [PATCH v3 8/8] clk: sunxi-ng: sun6i-rtc: add a733 support sashiko-bot
2026-07-02 23:59 ` [PATCH v3 0/8] clk: sun6i-rtc: Add support for Allwinner A733 SoC Enzo Adriano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260702-a733-rtc-v3-8-eb2580374de6@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=junhui.liu@pigmoral.tech \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=sboyd@kernel.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox