From: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Subject: [PATCH v2 2/3] media: i2c: og0ve1b: Introduce per-sensor data structure
Date: Thu, 02 Jul 2026 18:52:07 +0800 [thread overview]
Message-ID: <20260702-og0va1b-v2-2-0071442caa2a@oss.qualcomm.com> (raw)
In-Reply-To: <20260702-og0va1b-v2-0-0071442caa2a@oss.qualcomm.com>
In preparation for supporting further OmniVision sensors that share most
of this driver, move the sensor-specific parameters (chip id, MCLK
frequency, test pattern register, link frequency menu and the list of
supported modes) into a new struct og0ve1b_sensor_data, selected through
i2c_get_match_data() at probe time.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
---
drivers/media/i2c/og0ve1b.c | 101 +++++++++++++++++++++++++++++---------------
1 file changed, 67 insertions(+), 34 deletions(-)
diff --git a/drivers/media/i2c/og0ve1b.c b/drivers/media/i2c/og0ve1b.c
index 84a28cdcade10f8fbcf945999e88f84641b9bc0d..acc06b10bf896f734926289099a70fbc2bb628d5 100644
--- a/drivers/media/i2c/og0ve1b.c
+++ b/drivers/media/i2c/og0ve1b.c
@@ -66,10 +66,21 @@ struct og0ve1b_mode {
u32 hts; /* Horizontal timing size */
u32 vts; /* Default vertical timing size */
u32 bpp; /* Bits per pixel */
+ u32 code; /* MEDIA_BUS_FMT code */
const struct og0ve1b_reg_list reg_list; /* Sensor register setting */
};
+struct og0ve1b_sensor_data {
+ u64 chip_id;
+ unsigned long mclk_freq;
+ u32 test_pattern_reg;
+ const s64 *link_freq_menu;
+ int num_link_freqs;
+ const struct og0ve1b_mode *modes;
+ int num_modes;
+};
+
static const char * const og0ve1b_test_pattern_menu[] = {
"Disabled",
"Vertical Colour Bars",
@@ -97,8 +108,7 @@ struct og0ve1b {
struct v4l2_ctrl *exposure;
struct v4l2_ctrl_handler ctrl_handler;
- /* Saved register value */
- u64 pre_isp;
+ const struct og0ve1b_sensor_data *sensor;
};
static const struct cci_reg_sequence og0ve1b_640x480_120fps_mode[] = {
@@ -254,6 +264,7 @@ static const struct og0ve1b_mode supported_modes[] = {
.hts = 792,
.vts = 568,
.bpp = 8,
+ .code = MEDIA_BUS_FMT_Y8_1X8,
.reg_list = {
.regs = og0ve1b_640x480_120fps_mode,
.num_regs = ARRAY_SIZE(og0ve1b_640x480_120fps_mode),
@@ -261,23 +272,39 @@ static const struct og0ve1b_mode supported_modes[] = {
},
};
+static const struct og0ve1b_sensor_data og0ve1b_data = {
+ .chip_id = OG0VE1B_CHIP_ID,
+ .mclk_freq = OG0VE1B_MCLK_FREQ_24MHZ,
+ .test_pattern_reg = OG0VE1B_REG_PRE_ISP,
+ .link_freq_menu = og0ve1b_link_freq_menu,
+ .num_link_freqs = ARRAY_SIZE(og0ve1b_link_freq_menu),
+ .modes = supported_modes,
+ .num_modes = ARRAY_SIZE(supported_modes),
+};
+
static int og0ve1b_enable_test_pattern(struct og0ve1b *og0ve1b, u32 pattern)
{
- u64 val = og0ve1b->pre_isp;
+ u32 reg = og0ve1b->sensor->test_pattern_reg;
+ u64 val;
+ int ret;
+
+ ret = cci_read(og0ve1b->regmap, reg, &val, NULL);
+ if (ret)
+ return ret;
if (pattern)
val |= OG0VE1B_TEST_PATTERN_ENABLE;
else
val &= ~OG0VE1B_TEST_PATTERN_ENABLE;
- return cci_write(og0ve1b->regmap, OG0VE1B_REG_PRE_ISP, val, NULL);
+ return cci_write(og0ve1b->regmap, reg, val, NULL);
}
static int og0ve1b_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct og0ve1b *og0ve1b = container_of(ctrl->handler, struct og0ve1b,
ctrl_handler);
- const struct og0ve1b_mode *mode = &supported_modes[0];
+ const struct og0ve1b_mode *mode = &og0ve1b->sensor->modes[0];
s64 exposure_max;
int ret;
@@ -333,7 +360,8 @@ static const struct v4l2_ctrl_ops og0ve1b_ctrl_ops = {
static int og0ve1b_init_controls(struct og0ve1b *og0ve1b)
{
struct v4l2_ctrl_handler *ctrl_hdlr = &og0ve1b->ctrl_handler;
- const struct og0ve1b_mode *mode = &supported_modes[0];
+ const struct og0ve1b_mode *mode = &og0ve1b->sensor->modes[0];
+ const struct og0ve1b_sensor_data *sensor = og0ve1b->sensor;
s64 exposure_max, pixel_rate, h_blank, v_blank;
struct v4l2_fwnode_device_properties props;
struct v4l2_ctrl *ctrl;
@@ -343,12 +371,12 @@ static int og0ve1b_init_controls(struct og0ve1b *og0ve1b)
ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, &og0ve1b_ctrl_ops,
V4L2_CID_LINK_FREQ,
- ARRAY_SIZE(og0ve1b_link_freq_menu) - 1,
- 0, og0ve1b_link_freq_menu);
+ sensor->num_link_freqs - 1,
+ 0, sensor->link_freq_menu);
if (ctrl)
ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- pixel_rate = og0ve1b_link_freq_menu[0] / mode->bpp;
+ pixel_rate = sensor->link_freq_menu[0] / mode->bpp;
v4l2_ctrl_new_std(ctrl_hdlr, &og0ve1b_ctrl_ops, V4L2_CID_PIXEL_RATE,
0, pixel_rate, 1, pixel_rate);
@@ -407,7 +435,7 @@ static int og0ve1b_init_controls(struct og0ve1b *og0ve1b)
static void og0ve1b_update_pad_format(const struct og0ve1b_mode *mode,
struct v4l2_mbus_framefmt *fmt)
{
- fmt->code = MEDIA_BUS_FMT_Y8_1X8;
+ fmt->code = mode->code;
fmt->width = mode->width;
fmt->height = mode->height;
fmt->field = V4L2_FIELD_NONE;
@@ -421,8 +449,8 @@ static int og0ve1b_enable_streams(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state, u32 pad,
u64 streams_mask)
{
- const struct og0ve1b_reg_list *reg_list = &supported_modes[0].reg_list;
struct og0ve1b *og0ve1b = to_og0ve1b(sd);
+ const struct og0ve1b_reg_list *reg_list = &og0ve1b->sensor->modes[0].reg_list;
int ret;
ret = pm_runtime_resume_and_get(og0ve1b->dev);
@@ -484,13 +512,14 @@ static int og0ve1b_set_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state,
struct v4l2_subdev_format *fmt)
{
+ struct og0ve1b *og0ve1b = to_og0ve1b(sd);
struct v4l2_mbus_framefmt *format;
const struct og0ve1b_mode *mode;
format = v4l2_subdev_state_get_format(state, 0);
- mode = v4l2_find_nearest_size(supported_modes,
- ARRAY_SIZE(supported_modes),
+ mode = v4l2_find_nearest_size(og0ve1b->sensor->modes,
+ og0ve1b->sensor->num_modes,
width, height,
fmt->format.width,
fmt->format.height);
@@ -505,10 +534,12 @@ static int og0ve1b_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
+ struct og0ve1b *og0ve1b = to_og0ve1b(sd);
+
if (code->index > 0)
return -EINVAL;
- code->code = MEDIA_BUS_FMT_Y8_1X8;
+ code->code = og0ve1b->sensor->modes[0].code;
return 0;
}
@@ -517,15 +548,18 @@ static int og0ve1b_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
- if (fse->index >= ARRAY_SIZE(supported_modes))
+ struct og0ve1b *og0ve1b = to_og0ve1b(sd);
+ const struct og0ve1b_sensor_data *sensor = og0ve1b->sensor;
+
+ if (fse->index >= sensor->num_modes)
return -EINVAL;
- if (fse->code != MEDIA_BUS_FMT_Y8_1X8)
+ if (fse->code != sensor->modes[fse->index].code)
return -EINVAL;
- fse->min_width = supported_modes[fse->index].width;
+ fse->min_width = sensor->modes[fse->index].width;
fse->max_width = fse->min_width;
- fse->min_height = supported_modes[fse->index].height;
+ fse->min_height = sensor->modes[fse->index].height;
fse->max_height = fse->min_height;
return 0;
@@ -534,13 +568,14 @@ static int og0ve1b_enum_frame_size(struct v4l2_subdev *sd,
static int og0ve1b_init_state(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state)
{
+ struct og0ve1b *og0ve1b = to_og0ve1b(sd);
struct v4l2_subdev_format fmt = {
.which = V4L2_SUBDEV_FORMAT_TRY,
.pad = 0,
.format = {
- .code = MEDIA_BUS_FMT_Y8_1X8,
- .width = supported_modes[0].width,
- .height = supported_modes[0].height,
+ .code = og0ve1b->sensor->modes[0].code,
+ .width = og0ve1b->sensor->modes[0].width,
+ .height = og0ve1b->sensor->modes[0].height,
},
};
@@ -586,18 +621,13 @@ static int og0ve1b_identify_sensor(struct og0ve1b *og0ve1b)
return ret;
}
- if (val != OG0VE1B_CHIP_ID) {
- dev_err(og0ve1b->dev, "chip id mismatch: %x!=%llx\n",
- OG0VE1B_CHIP_ID, val);
+ if (val != og0ve1b->sensor->chip_id) {
+ dev_err(og0ve1b->dev, "chip id mismatch: %llx!=%llx\n",
+ og0ve1b->sensor->chip_id, val);
return -ENODEV;
}
- ret = cci_read(og0ve1b->regmap, OG0VE1B_REG_PRE_ISP,
- &og0ve1b->pre_isp, NULL);
- if (ret)
- dev_err(og0ve1b->dev, "failed to read pre_isp: %d\n", ret);
-
- return ret;
+ return 0;
}
static int og0ve1b_check_hwcfg(struct og0ve1b *og0ve1b)
@@ -624,8 +654,8 @@ static int og0ve1b_check_hwcfg(struct og0ve1b *og0ve1b)
ret = v4l2_link_freq_to_bitmap(og0ve1b->dev,
bus_cfg.link_frequencies,
bus_cfg.nr_of_link_frequencies,
- og0ve1b_link_freq_menu,
- ARRAY_SIZE(og0ve1b_link_freq_menu),
+ og0ve1b->sensor->link_freq_menu,
+ og0ve1b->sensor->num_link_freqs,
&freq_bitmap);
v4l2_fwnode_endpoint_free(&bus_cfg);
@@ -686,6 +716,9 @@ static int og0ve1b_probe(struct i2c_client *client)
return -ENOMEM;
og0ve1b->dev = &client->dev;
+ og0ve1b->sensor = i2c_get_match_data(client);
+ if (!og0ve1b->sensor)
+ return -ENODEV;
v4l2_i2c_subdev_init(&og0ve1b->sd, client, &og0ve1b_subdev_ops);
@@ -700,7 +733,7 @@ static int og0ve1b_probe(struct i2c_client *client)
"failed to get XVCLK clock\n");
freq = clk_get_rate(og0ve1b->xvclk);
- if (freq && freq != OG0VE1B_MCLK_FREQ_24MHZ)
+ if (freq && freq != og0ve1b->sensor->mclk_freq)
return dev_err_probe(og0ve1b->dev, -EINVAL,
"XVCLK clock frequency %lu is not supported\n",
freq);
@@ -819,7 +852,7 @@ static const struct dev_pm_ops og0ve1b_pm_ops = {
};
static const struct of_device_id og0ve1b_of_match[] = {
- { .compatible = "ovti,og0ve1b" },
+ { .compatible = "ovti,og0ve1b", .data = &og0ve1b_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, og0ve1b_of_match);
--
2.34.1
next prev parent reply other threads:[~2026-07-02 10:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-02 10:52 [PATCH v2 0/3] media: i2c: Add OmniVision OG0VA1B camera sensor driver Wenmeng Liu
2026-07-02 10:52 ` [PATCH v2 1/3] dt-bindings: media: i2c: og0ve1b: Add OmniVision OG0VA1B camera sensor Wenmeng Liu
2026-07-02 12:24 ` Vladimir Zapolskiy
2026-07-02 19:21 ` Conor Dooley
2026-07-02 10:52 ` Wenmeng Liu [this message]
2026-07-02 11:04 ` [PATCH v2 2/3] media: i2c: og0ve1b: Introduce per-sensor data structure sashiko-bot
2026-07-02 13:10 ` Vladimir Zapolskiy
2026-07-02 16:31 ` Bryan O'Donoghue
2026-07-02 10:52 ` [PATCH v2 3/3] media: i2c: og0ve1b: Add support for OmniVision OG0VA1B Wenmeng Liu
2026-07-02 13:16 ` Vladimir Zapolskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260702-og0va1b-v2-2-0071442caa2a@oss.qualcomm.com \
--to=wenmeng.liu@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox